NEXX RACING V-line Front Suspension system is designed with innovative features such as quick adjustable caster, quick adjustable camber, adjustable ride height…. It makes the Mini-Z looks much like a real car, not only fast but also stable, better cornering and better suspension overall.  With locknuts and kingpins, V-LINE is designed to minimize most of the play resulting very smooth performance.  The V-LINE suspension systems fits only Mini-Z MR03 wide base models and also fits PN 2.5 Chassis.  For easy assembly, we pre-install the V-LINE suspension system at factory so it’s very easy and fast to assembly it on the Mini-Z.COLOR: REDV-LINE SUSPENSION SYSTEM FEATURESV- line suspension is designed with 2 V-shaped suspension forks to bring you a cool suspension system·Same width as stock. (MR02/ MR03 PNR2.5W Chassis width)·Suspension movement use ball joints instead of sliding knuckle and locknut easy adjustment play between knuckle and upper arm make joints will not pop out even during hard collision.·Adjustable camber from 0-30 degrees with 4 position eccentric shaft with easy operation·Quick adjustable caster by caster bar from 0-1.90 ·Both 00 and 10 lower A arms provided to facilitate suspension setup·Ride height adjustment  with turn of a screw·All 3 tie rods 00, 0.50, 10 included ·High quality Precision CNC Swiss 7075 aluminumAnleitung V-Line 

NEXX RACING V-line Front Suspension system is designed with innovative features such as quick adjustable caster, quick adjustable camber, adjustable ride height…. It makes the Mini-Z looks much like a real car, not only fast but also stable, better cornering and better suspension overall.  With locknuts and kingpins, V-LINE is designed to minimize most of the play resulting very smooth performance.  The V-LINE suspension systems fits only Mini-Z MR03 wide base models and also fits PN 2.5 Chassis.  For easy assembly, we pre-install the V-LINE suspension system at factory so it’s very easy and fast to assembly it on the Mini-Z.COLOR: BLACKV-LINE SUSPENSION SYSTEM FEATURESV- line suspension is designed with 2 V-shaped suspension forks to bring you a cool suspension system·Same width as stock. (MR02/ MR03 PNR2.5W Chassis width)·Suspension movement use ball joints instead of sliding knuckle and locknut easy adjustment play between knuckle and upper arm make joints will not pop out even during hard collision.·Adjustable camber from 0-30 degrees with 4 position eccentric shaft with easy operation·Quick adjustable caster by caster bar from 0-1.90 ·Both 00 and 10 lower A arms provided to facilitate suspension setup·Ride height adjustment  with turn of a screw·All 3 tie rods 00, 0.50, 10 included ·High quality Precision CNC Swiss 7075 aluminumAnleitung V-Line 

Instruction Manual Downloadhttp://www.pnracing.com/download/mr3080.pdf   FEATURES: •Unequal length A-Arm suspension for MR-03 chassis. –Modeled after full-scale performance car suspension for realism. –Double A-Arm suspension gives good control of suspension geometry and roll center during travel. –Camber change with suspension compression during cornering keeps wheels near vertical for maximum tire contact with the road. Allows for precise cornering and maximum road holding. •Direct suspension swap –Same width as stock. (MR02/ MR03 PNR2.5W Chassis width) –Ride height remains the same as stock. –0.5mm wider front steering geometry for less offset and faster steering. Overall width still remains the same to fit Auto Scale bodies. •No bump steer throughout suspension travel. •Suspension movement use ball joints instead of sliding knuckles. Eliminates constriction associated with sliding pin especially with high offset wheels. –Low constriction results in consistent cornering. •Machined aluminum ball socket instead of snap-fit. Joints will not pop out even during a hard collision. •Adjustable camber from 0-3° degrees with 1.3°/mm of camber gain. •Adjustable caster from 0-1.8° degrees •4 positions adjustable upper A-Arm pivot –Changes camber gain, static camber and roll center –Quick adjustment with set screw •Includes 3 tie-rods: 0° , +.5°  and +1° •Quick down stop adjustment with the turn of a nut •Benefits of the sophisticated suspension system are precise cornering and maximum road holding which adds to mini-z driving pleasure   ADJUSTMENT SPEC: Droop Adjustment Caster Adjustment Camber Gain and Camber Adjustment Tie Rod Adjustment   COMES WITH: 1 x Upper Bracket (#MR3062) 1 x Lower Carbon Plate Cover (MR3070C) 2 x Upper Arm 2 x Lower Arm 4 x Delrin Balls for Upper Arm and Lower Arm (#MR3080D) 2 x Spring Guide Pin (#MR2507) 2 x Spring Holder (#MR2056F) 1 x Full Option Spring Set (#MR2501C) 2 x Knuckle 2 x Knuckle Shaft 3mm (#MR3080A3) 2 x Knuckle Tie Rod Pin 2 x Eccentric Shaft Adjuster (#MR2506) 2 x Lower Arm Pin (#MR2509) 4 x M2-3mm Set Screw (#MR2510S) 1 x 0 Deg Tie Rod (#MR3050G) 1 x +0.5 Tie Rod (#MR3050H) 1 x +1.0 Tie Rod (#MR3050J) 4 x M2-0.2mm Shims (#700501) 2 x M3-0.2mm Shims (#700502) 2 x M2x3 Countersunk Hex Screw (#709903) 2 x M2x4 Countersunk Hex Screw (#709904) 4 x M2x6 Countersunk Hex Screw (#709906) 4 x M2x6 UFO Head Hex Screw (#708806) 2 x M2x10 Countersunk Hex Screw (#709910)   REQUIRED PARTS 4 x Ball Bearing 3x6x2mm #600126   OPTIONAL PARTS MR3080A2 MR2506F MR2506FS MR2506FL MR3050T MR3050Q 711906

Instruction Manual Downloadhttp://www.pnracing.com/download/mr3080.pdf   FEATURES: •Unequal length A-Arm suspension for MR-03 chassis. –Modeled after full-scale performance car suspension for realism. –Double A-Arm suspension gives good control of suspension geometry and roll center during travel. –Camber change with suspension compression during cornering keeps wheels near vertical for maximum tire contact with the road. Allows for precise cornering and maximum road holding. •Direct suspension swap –Same width as stock. (MR02/ MR03 PNR2.5W Chassis width) –Ride height remains the same as stock. –0.5mm wider front steering geometry for less offset and faster steering. Overall width still remains the same to fit Auto Scale bodies. •No bump steer throughout suspension travel. •Suspension movement use ball joints instead of sliding knuckles. Eliminates constriction associated with sliding pin especially with high offset wheels. –Low constriction results in consistent cornering. •Machined aluminum ball socket instead of snap-fit. Joints will not pop out even during a hard collision. •Adjustable camber from 0-3° degrees with 1.3°/mm of camber gain. •Adjustable caster from 0-1.8° degrees •4 positions adjustable upper A-Arm pivot –Changes camber gain, static camber and roll center –Quick adjustment with set screw •Includes 3 tie-rods: 0° , +.5°  and +1° •Quick down stop adjustment with the turn of a nut •Benefits of the sophisticated suspension system are precise cornering and maximum road holding which adds to mini-z driving pleasure   ADJUSTMENT SPEC: Droop Adjustment Caster Adjustment Camber Gain and Camber Adjustment Tie Rod Adjustment   COMES WITH: 1 x Upper Bracket (#MR3062) 1 x Lower Carbon Plate Cover (MR3070C) 2 x Upper Arm 2 x Lower Arm 4 x Delrin Balls for Upper Arm and Lower Arm (#MR3080D) 2 x Spring Guide Pin (#MR2507) 2 x Spring Holder (#MR2056F) 1 x Full Option Spring Set (#MR2501C) 2 x Knuckle 2 x Knuckle Shaft 3mm (#MR3080A3) 2 x Knuckle Tie Rod Pin 2 x Eccentric Shaft Adjuster (#MR2506) 2 x Lower Arm Pin (#MR2509) 4 x M2-3mm Set Screw (#MR2510S) 1 x 0 Deg Tie Rod (#MR3050G) 1 x +0.5 Tie Rod (#MR3050H) 1 x +1.0 Tie Rod (#MR3050J) 4 x M2-0.2mm Shims (#700501) 2 x M3-0.2mm Shims (#700502) 2 x M2x3 Countersunk Hex Screw (#709903) 2 x M2x4 Countersunk Hex Screw (#709904) 4 x M2x6 Countersunk Hex Screw (#709906) 4 x M2x6 UFO Head Hex Screw (#708806) 2 x M2x10 Countersunk Hex Screw (#709910)   REQUIRED PARTS 4 x Ball Bearing 3x6x2mm #600126   OPTIONAL PARTS MR3080A2 MR2506F MR2506FS MR2506FL MR3050T MR3050Q 711906

Features:Nexx Racing introduces new MR03W Mono suspension system.Designs based on full scale car model for realism.Replacement of stock suspension system.Provides better control of roll center and suspension geometry while travelling.Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.Same width as stock (W).Same ride height as stock.Same steering bar as stock (toe 0 degree).Guarantees no steering pump as suspension travels.CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.Caster angle is +1° degrees.Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.Anleitung NX-274 MR03 Mono Suspension Setup

Features:Nexx Racing introduces new MR03W Mono suspension system.Designs based on full scale car model for realism.Replacement of stock suspension system.Provides better control of roll center and suspension geometry while travelling.Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.Same width as stock (W).Same ride height as stock.Same steering bar as stock (toe 0 degree).Guarantees no steering pump as suspension travels.CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.Caster angle is +1° degrees.Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.Anleitung NX-274 MR03 Mono Suspension Setup

Adjustable 0.4mm For MR3080 V4 Double A arm Knuckle Compatible MR3046 MR03 Knuckle Axel 

Use for PN Racing MR02 A-Arm MR2500 and MR03 A-Arm MR3050

Use for PN Racing MR02 A-Arm MR2500 and MR03 A-Arm MR3050

Delrin Ball For MR3080 V4 Double A arm Knuckle

Include four sets (8pcs) of different hardness Springs for V-Line Suspension System, each hardness comes with different colors.

NEXX Racing Mini-Z MR03 Front Suspension Spacer (BLACK) is used to replace MR03 plastic spacer when installing optional double A-arm V-LINE from NEXX RACING or PN Racing Double A-Arm Front Suspension or PN Racing MR3051 tower bars.  It eliminates the need of cutting off partial of the MR03 plastic spacer when using the optional front suspensions.*** Do not work with stock Kyosho Mini-Z front suspensionMaterial: Aluminum 7075Color: Black anodizing color

Work for MR02 Stock front end, MR02 (MR2500) and MR03 (MR3050)  PN Double A arm Comes with: Lip thickness 0.8mm 2 x 4.8mm height Delrin Machine Cut Spring Holder 2 x 5.0mm height Delrin Machine Cut Spring Holder 2 x 5.2mm height Delrin Machine Cut Spring Holder 4 x 0.2mm Shims (Orange) 4 x 0.5mm Shims (Blue)