Aero matters even though it just looks cool! This is not universal, only fits the R1 when using the R1F1 pod plates ( they already have holes there for the Formula 1 wing mount) Formula R1 composite POD PLATE (RF-PD-004G) Formula R1 ALUMINUM POD PLATE (RF-PD-004A) Formula R1 CARBON POD PLATE (RF-PD-004C)
Dual shock position shock mount when used with the +2 rear shock mount (R1-2RS-005). Will fit old Big Block Kit or new 1pc servo mountWhen using aluminum ball studs DO NOT ATTEMPT TO SCREW INTO HOLES. Use a steel screw and a drop of oil first.
THIS MOUNT MOVES THE SHOCK FORWARD 2MM THIS GIVE MORE STABLE BRAKING AND ON POWER STEERING AND JUST A GENERAL BETTER DRIVING FEEL. IT WILL WORK WITH THE ORIGINAL SMALL BATTERY PLATE OR WITH THE NEW DUAL POSITION BIG BLOCK PLATE.Falls mit Big Block gefahren wird, ist die neue Big Block Plate zu verwenden!
These are tuned 1/28 scale servos. After months of testing we were able to come up with an excellent tune.
Another feature that we had concern with was the "wandering" and constantly having to adjust left and right endpoints. This is no longer an issue with the MWX servos
AT THIS TIME THESE DO NOT FIT THE FORMULA R1.THIS IS BEING WORKED ON AND RELEASED SOON
NEW VERSION 2!!
THESE ARE A RUNNING CHANGE, THE RED ALUMINUM V1 IS NO LONGER AVAILABLE
WHITE BILLET DELRIN
GEOMETRY CHANGE, RECHECK YOUR RIDE HEIGHT
SINGLE O RING PER SIDE
USE NON FRICTION GREASE (BLACK IS THE BEST) ON BOTH ORINGS
Because of the slop being removed it is recommended to purchase the "ZS" camber plates(BLACK) which have been designed for the axle and knuckle slop being removed.
12 Black hard anodized 3.5mm Aluminum ballstuds for your MWX R1 and Formula R1 kits.
DO NOT OVER TIGHTEN
DO NOT USE LOCTITE
USE A GOOD 1.5 TOOL
TWO EXTRAS ARE INCLUDED,THIS IS AN ADVANCED USER OPTION THEY ARE DELICATE TO INSTALL.BENEFIT IS A SMOOTHER OPERATING SUSPENSION. 1 GRAM WEIGHT SAVINGS
1.5MM Aluminum chassis for the MWX R.1Recomended for the LM102, will work on the 98 car but will require setup skills to keep it from traction rolling.
Our bodies are made specifically for Silver Horse RC and they fit perfectly on Kyosho MR03, PN, Atomic, GL, and any other Mini-Z compatible chassis. The Sauber is a 102 mm body or as many call "LM." The paint is high gloss silver and tested tough with months of racing and testing. The body weighs only 1.3 oz before the clips are installed.
THESE ARE NOT SHOW OR COLLECTIBLE BODIES THEY ARE RACE BODIESFür den MWX R.1 ist ein spezielles Install Kit erhältlich:R.1 Install Kit
Want to make a quick offset change without changing tires? These dry ceramic bearings are 0.5mm thinner than the standard wheel bearings so removing your inside bearing and installing one of these will change your offset by .5 and you can do this on both sides!
You can make a 0 offset wheel -.5 and +.5 without taking a risk of gluing up a new tire!
Kit comes with:2 x dry ceramic dual shield laser etched bearings2 x 0.4mm thick brass spacers
Dry carbon and CNC machined weighted bumper system for lexan bodied 1/28 scale cars
This is one of the quickest and easiest way to tame down the steering of your Double A arm cars like the GL GT and the Reflex R28 but also work great for quick changes to even the MWX GLR.
Passend für den MWX R.1, GL GLR / GLR-GT / GTR, PN 2.0/3.0, MR03,...
Dry carbon and CNC machined weighted bumper system for lexan bodied 1/28 scale cars
This is one of the quickest and easiest way to tame down the steering of your Double A arm cars like the GL GT and the Reflex R28 but also work great for quick changes to even the MWX GLR.
Passend für den MWX R.1, GL GLR / GLR-GT / GTR, PN 2.0/3.0, MR03,...
Universal Zero Slop axles. Get rid of the gap between the inner bearing ID and the OD of the axle. On some cars this clearance can alter your camber by 1-2 degrees!Will fit MWX, GL, RTA, Atomic, Reflex RX28 and many others Comes with extra o rings MAKE SURE AND USE A DROP OF OIL OR GREASE ON THE O RINGS SO THEY SLIDE ON
Red anodized aluminum knuckles for your R.1. Not only are these more durable but they are also part of the ZS series. The O-Rings seat inside the knuckles. This cuts down on slop and it also seals the damping grease inside.Because of the slop being removed it is recommended to purchase the "ZS" camber plates which have been designed for the axle and knuckle slop being removed.
Kit includes everything shown to assemble your own custom C9! Painted body, window, wing assembly, accessories and clear headlight covers.- CLIPS ARE NOT INCLUDED- THESE ARE NOT SHOW OR COLLECTIBLE BODIES THEY ARE RACE BODIESFür den MWX R.1 ist ein spezielles Install Kit mit den passenden Clips erhältlich:R.1 Install Kit
Kit includes everything shown to assemble your own custom C9! Unpainted body, window, wing assembly, accessories and clear headlight covers.- CLIPS ARE NOT INCLUDED- THESE ARE NOT SHOW OR COLLECTIBLE BODIES THEY ARE RACE BODIESFür den MWX R.1 ist ein spezielles Install Kit mit den passenden Clips erhältlich:R.1 Install Kit
Body Clips - farbig10 Stück Gold10 Stück Schwarz10 Stück SilberThe most frequently lost item in mini RC has been addressed with our redesigned body clip. It now features an enhanced hook, making it simpler to attach to the body post.
1.1mm Alloy steel chassis for the R.1More responsive and a few grams lighter.Chassis is pinned for the upcoming pinned accessories1.1mm Chassis Platte für den MWX R.1 aus legiertem Stahl. Etwas leichter als die original Messingplatte.
GOLD Kit screw set for the MWX R.1 and Formula R.1
this is not a full replacement kit only the "showing" screws
10 M2/4/FH
10 M2/3/FH
6 M2/6/FH
8 M2/4/BH
4 M2/6/BH
One piece Aluminium Servo mount for the R.1 (not Formula R.1)It has post built in for the BBK bracket which will be sold separately. Also has clearance for side wire servos like the MWX servo and the PN servo's. AGFRC 6g servos will also fit.
