GL is going to release our Hard Case LiHV Battery for mini scale chassis. It is compatible to our GL own designed battery connector which can be plugged into the battery “directly” as if you are using the pin plugs. At the same time it can support pin plugs if you prefer to use pin plugs. No matter which of the above mentioned plugs you are using, you are able to enjoy the benefits of this Hard Case Battery:
Battery producers usually making “extra” length of wire in order to suit all chassis but this makes wires are jumping up in the chassis due to they are too long. Now you can tailor made the length of wires coming out from your car’s ESC to perfectly match each of your car setting & chassis. Side benefit is reduced weight as less redundant wires.
The battery is able to sit into the car chassis properly without intervention by wires coming out from the battery.
With the above mentioned 2 benefits, you will find your wires are more tidily placed inside the chassis which have added advantage to the car stability.
It is a high voltage battery that supports charging up to 8.6 voltage and gives you more power.
More durable indeed as the battery is protected by the hard case.
Battery size:43x20x13mm
Marka batteries are of high quality and have been developed using the most modern technologies available.
They are "Top level" batteries for use in the world of racing at professional levels.
These batteries have a high voltage level under load, with a low internal resistance.
Specification
Voltage: 7.4V (2S)
Capacity: 405mAh
C-rate: 70C
Cable: 22Awg
Plug: JST-PH
Type: Rectangular
Size: 44 x 20 x 12.9mm (Length x Width x Height)
Weight: 19g
All New from Reflex Racing is an Industry first Hard Case Lipo!!! This battery is designed to fit into most modern 1/28 scale chassis.
Why hardcase? Well, hardcase batteries have numerous benefits. Due to its design, a hardcase cuts down on connection points, uses more efficient plugs and thicker wire. These 3 elements drop the internal resistance of the entire circuit leading to better overall current flow, less heat loss and more performance. Couple that with the additional voltage capacity (these are safe to charge to 8.6v!) and the result is a sure fire winner.
Additionally, hard case batteries simply wire better. In categories like Pan Car, where wiring is a bit tricky to fit under the low slung bodies, the hardcase bullet to battery system opens up a tremendous amount of space under the body.
Lastly, hard case batteries are also safer and tougher. Wires don't break at the exit of the shrink, so shorts are minimized and, the hard case also protects the cells from damage better, as well as isolates them from possible punctures or shorts caused by the chassis or impacts.
We recommend to charge the batteries at 1.0A
Dimensions:
44.5x19.7x13mm
Weight:
17g
Includes:
1 battery pack
2 gold bullet plugs
Finally here! our S Spec batteries are designed around the stock classes and offer the lowest IRs on the market today! lower the IR means the faster and more powerful the battery is.
Features:
high flow wires
black ,black, red colored wires
low IR (internal resistance)
great looks!
for best results DO NOT CHARGE OR DISCHARGE HIGHER THAN 1.5A, ANYTHING HIGHER THAN THIS WILL INCREASE THE IR AND DESTABILIZE THE BATTERY
These batteries have a high voltage level under load, with low internal resistance.Designed for use with PNR3.0 chassis and Kyosho MR03 Chassis.
(This is a thin version, you can add on some lead on your chassis to add weight) SpecificationVoltage: 3.75V (1S)Capacity: 430mAhRecommend Charge Rate: 0.8AC-rate: 60C Cable: 24Awg Plug: Molex Size: 42.6 x 20 x 7.4mm (Length x Width x Height) Weight: 10g
Marka batteries are of high quality and have been developed using the most modern technologies available.
They are "Top level" batteries for use in the world of racing at professional levels.
These batteries have a high voltage level under load, with a low internal resistance.
Designed for use with 1/28 scale cars
Specification
Voltage: 7.4V (2S)
Capacity: 385mAh
C-rate: 70C
Cable: 22Awg
Plug: JST-PH
Type: Rectangular
Size: 44 x 20 x 11.5mm (Length x Width x Height)
Weight: 18.7g
GL is going to release our Hard Case LiHV Battery for mini scale chassis. It is compatible to our GL own designed battery connector which can be plugged into the battery “directly” as if you are using the pin plugs. At the same time it can support pin plugs if you prefer to use pin plugs. No matter which of the above mentioned plugs you are using, you are able to enjoy the benefits of this Hard Case Battery:
Battery producers usually making “extra” length of wire in order to suit all chassis but this makes wires are jumping up in the chassis due to they are too long. Now you can tailor made the length of wires coming out from your car’s ESC to perfectly match each of your car setting & chassis. Side benefit is reduced weight as less redundant wires.
The battery is able to sit into the car chassis properly without intervention by wires coming out from the battery.
With the above mentioned 2 benefits, you will find your wires are more tidily placed inside the chassis which have added advantage to the car stability.
It is a high voltage battery that supports charging up to 8.6 voltage and gives you more power.
More durable indeed as the battery is protected by the hard case.
Battery size:
Marka batteries are of high quality and have been developed using the most modern technologies available.
They are "Top level" batteries for use in the world of racing at professional levels.
These batteries have a high voltage level under load, with a low internal resistance.
Specification
Voltage: 7.4V (2S)
Capacity: 455mAh
C-rate: 70C
Cable: 22Awg
Plug: JST-PH
Type: Rectangular
Size: 44,5 x 25 x 13,7mm (Length x Width x Height)
Weight: 28g
All New from Reflex Racing is our 400mah LiHv battery. This battery offers longer runtime, lower IR and overall better performance for longer races vs the 340mah pack all while only weighing an extra 2g. This battery is slightly bigger so, it will only fit your RX28 when using the 24mm battery conversion kits or the 102mm WB Chassis. This battery will fit most AWDs car in the market as well as other cars that are capable of fitting a 24mm wide battery.
Why hardcase? Well, hardcase batteries have numerous benefits. Due to its design, a hardcase cuts down on connection points, uses more efficient plugs and thicker wire. These 3 elements drop the internal resistance of the entire circuit leading to better overall current flow, less heat loss and more performance. Couple that with the additional voltage capacity (these are safe to charge to 8.6v!) and the result is a sure fire winner.
The Benefit of having a battery that sits solidly in place on the chassis offers a handling advantage as there are no plugs and wires dangling inside the car. (Just think, we use 0.9g mass damper weights to stability our cars. Plugs and wires often represent more than this weight and they are jumping up and down inside the body of the car when using a soft case pack. ). The result is a car that behaves more smoothly. Additionally, hard case batteries simply wire better. In categories like Pan Car, where wiring is a bit tricky to fit under the low slung bodies, the hard case bullet to battery system opens up a tremendous amount of space under the body.
Lastly, hard case batteries are also safer and tougher. Wires don't break at the exit of the shrink, so shorts are minimized and, the hard case also protects the cells from damage better, as well as isolates them from possible punctures or shorts caused by the chassis or impacts.
We recommend to charge the batteries at 1.0A
Dimensions: 44.5x24x12.5mm
Weight: 19g
Includes:
1 battery pack2 gold bullet plugs
You Can use Cable no: RRE013 to charge.
Marka
batteries are of high quality and have been developed using the most modern
technologies available.
They are
"Top level" batteries for use in the world of racing at professional
levels.These
batteries have a high voltage level under load, with a low internal resistance.Designed
for use with 1/28 scale car (GLA)
Specification
Voltage: 7.4V
(2S)
Capacity:
450mAh
C-rate: 50C
Cable:
22Awg
Plug:
JST-PH
Type:
Rectangular
Size: 44.5 x
24.5 x 13.5mm (Length x Width x Height)
Weight: 27g
These batteries have a high voltage level under load, with low internal resistance. Designed for use with 1/28 scale car: Gl Racing GLR, GLR GT, GLF, GLD, Giulia, RTRC RTA, Nexx Racing Specter, Reflex Racing RX28.
Specification:Voltage: 7.4V (2S)Capacity: 385mAhRecommend Charge Rate: 0.8AC-rate: 70C Cable: 24Awg Plug: JST-PH Size: 44.8 x 20 x 11.9mm (Length x Width x Height) Weight: 19.5g
High Voltage 2S battery for R/C Competition usage. Size fit for GL-RIDER, GLA ,GLR, GLF-1, GLR-GT, GTR, RX28, RTA, MWX R.1, Nexx SpecterWird direkt mit dem GL Anschluss-Stecker geliefert!
Marka
batteries are of high quality and have been developed using the most modern
technologies available.
They are
"Top level" batteries for use in the world of racing at professional
levels.These
batteries have a high voltage level under load, with a low internal resistance.Designed
for use with 1/28 scale car (GLA-GLR-GLF-BZ)
Specification
Voltage: 7.4V
(2S)
Capacity:
350mAh
C-rate: 50C
Cable:
22Awg
Plug:
JST-PH
Type:
Rectangular
Size: 44 x
20 x 11.5mm (Length x Width x Height)
Weight: 18.5g
These batteries have a high voltage level under load, with low internal resistance.Designed for use with PNR2.5W chassis and Kyosho MR03 Chassis.
(This is a thin version, you can add on some lead on your chassis to add weight) SpecificationVoltage: 3.75V (1S)Capacity: 380mAhRecommend Charge Rate: 0.8AC-rate: 60C Cable: 24Awg Plug: Molex Size: 42.6 x 20 x 6.2mm (Length x Width x Height) Weight: 9g
Marka
Racing safety lipo bag for charging and storage LiPo batteries.
Made from
fire-proof and fire-resistant material.The bag is
in black color and carries the Marka logo.You can
store two standard size batteries.
Der LiPo Safety Bag ist für einen sicheren Transport oder Aufbewahrung von Akkus gedacht. Der sehr starke Klettverschluss sorgt ausserdem dafür, dass nicht doch noch etwas herausfällt. Abmessungen: 23x18cm.
Farbe: Schwarz
Mit dem Marka LiPo Spannungstester ist es einfach die Spannung deiner Lipos vor dem Rennen zu überprüfen.Geeignet für Lipo's von 1 - 4sKommt mit 4/5mm RundsteckerFür die Verwendung mit Lipos mit anderen Anschlusssteckern muss ein Adapterkabel verwendet oder die passenden Stecker umgelötet werden.
