You will get a 20cm long red color + 20cm long black color 22AWG silicone cable Cable Specification: Material: Soft Silicone O/D: 1.70mm Strand Count: 60 Strand Diameter: 0.08 mm Package Included: 1 x 20cm red color silicone cable 1 x 20cm black color silicone cable

ENSO BLUETH-2 designed or IOS user, easily and remotely access your ESC to change the parameter and firmware update wirelessly, also telemetry monitors the battery voltage / ESC temperature/throttle and motor rpm, without leaving the driver to stand. An advantage of the unbelievable micro size you can place it anywhere inside the car. Each Bluetooth adaptor has its unique ID and password, prevent to mess up with other drivers' phones.  * Micro Size* Low energy Bluetooth* Wireless setting* Wireless firmware update* Telemetry monitor the battery voltage / ESC temperature / throttle / rpm Support ESC: Swave-E2 / Swave-W / Swave-W2 (doesn't support Swave-E)System Support: iPhone 7 or later / IPAD Pro or laterPCB Size: 1cm*1cm (exclude cables) Different to use Android version "ENSO BLUETH" and IOS version ENSO BLUETH-2 on IOS device;IOS has its own password protocol then the Android, if use Android version "ENSO BLUETH" on IOS device although there is no problem if you are the first time to establish the connection, if trying to reconnect again it’s prohibited by IOS system, you have to remove the "ENSO BLUETH" from the phone system then go back to Swave apps to search your "ENSO BLUETH" and input password again like you are the first time to establish the connection.    To use ENSO BLUETH-2 is no longer repeating the process. ENSO BLUETH-2 may communicate with some Android devices but Ensotech cannot guarantee and we cannot make its work on all kinds of Androids. If you are using Android device please purchase the Android version - ENSO BLUETH   IOS Swave apps available on App Store and its call "Swave Dev" 

Swave W / W2 and Swave E2 can now use a wireless connection via ENSO BLUETH.  You can easily and remotely access your ESC to change the parameter and firmware update, also telemetry monitors the battery voltage / ESC temperature/throttle and motor rpm, without leaving the driver stand. With the technology of the ultra-low-power module, you can leave it with the ESC all the time. An advantage of the unbelievable micro size you can place it anywhere inside the car.Each ENSO BLUETH has its own unique device name and password, prevent to mess up with other drivers' phones.  * Micro Size* Low energy* Wireless setting* Wireless firmware update* Telemetry monitor the battery voltage / ESC temperature / throttle / rpm Support ESC:  Swave-E2 / Swave-W / W2 (doesn't support Swave-E)System Support: Android version 5.0 (Lollipop) or laterSize: 1cm*1cm (exclude cables) Video Link (Wireless and How to make the connection)https://youtu.be/7K48fuiJrEUhttps://youtu.be/Dv94GTC7uBc Different between to use Android version "ENSO BLUETH" and IOS version ENSO BLUETH-2;IOS has its own password protocol then the Android, if use Android version "ENSO BLUETH" on IOS device although there is no problem if you are the first time to establish the connection, if you want to reconnect again it’s prohibited by IOS system, you have to remove the "ENSO BLUETH" from the phone system then go back to swave apps to search your "ENSO BLUETH", input password again like you are the first time to establish the connection.  If you are using IOS device please purchase the IOS version - ENSO BLUETH-2 "ENSO BLUETH" able to communicate with most popular Android devices available on the market but Ensotech cannot guarantee it works on all kinds of Android devices.** TO GET THE BEST CONNECTION RESULT, PLEASE CLEAR THE PHONE CACHE MEMORY AND UNNECESSARY BACKGROUND APPS BEFORE USE OR SIMPLY RESTART THE PHONE **

This newest high-speed UARTLINK-III programming cable to connect Swave-E2 & Swave-W & W2 to Android devices (not IOS) has higher download and upload speeds that your setting change process and the firmware update is a breeze.  Swave's ESC requires OTG (On The Go) protocol to communicate with Android devices.  Most latest Android devices have OTG.  If you are not sure there are some free of charge apps available in Google Play™ use to check your device. UARTLINK-III provides with OTG Micro-USB connector on the phone end, for Type-C USB Android device require to use "USB Type-C Adaptor", available HEREIf you have your own Type-C adaptor make sure the adaptor support OTG, some adaptor came with the phone doesn't support OTG communication protocol, it's only for charging purpose. ** This cable not for Swave-E "Swave ESC" programming app available to download from Google Play™ either download the apk file from HERE to install manually The firmware update process needs to run without interruption otherwise that can render the device unusable.  Processing time depends on the specific hardware configuration of the Android device and the quality of the internet data speed.   If you want to modify UARTLINK to UARTLINK-II,  please leave your request in your order, we will provide a 3 pin connector in the shipment.  You will need to remove the pin from the 2pin connector and insert to the 3pin connector.   

UARTLINK programming cable using Micro-USB socket, if the Android device socket is "USB Type-C" you may require to use this adaptor Micro USB to Type-C adaptor with OTG Case: plastic Color: Black ** Swave ESC require OTG (On The Go) protocol to communicate with Android device.  ** Android device MUST have OTG, from Google market there are many free apps able to check your device doesn't support OTG. ** If required to use Type-C adaptor make sure the adaptor support OTG, some phone manufacturer their adaptor included in the phone box which doesn't support OTG communication protocol, only use for charging the phone battery. ** If required to use Type-C adaptor make sure the adaptor support OTG, some low price adaptor claimed they support OTG but actually not.  Check with the shop before purchase.

A pack of 2 pcs replacement on/off switch button for Swave-E2 / W / W2 Color: Blue Material: Silicone

Receiver Cable (RX cable) Compatible with Swave-E2 & Swave-W & W2 ONLY Cannot use on Swave-E 1.0mm JST to 1.5mm JST Wire length: 80mm ** Some aftermarket / no-brand receiver may require swap the cable you will need to consult your receiver seller.

For Swave-E2 / Swave-W & W2 ONLY Cannot use on Swave-E Suitable for Ensotech & Aurora Motor Cable Stocket: Motor end 5 pin / ESC end 5 pin Color: Black Wire length: 90mm

Package Included: 2 x JST-PH connector power cable

Receiver Cable (RX cable) Compatible with Swave-E2 & Swave W & W2 ONLY Cannot use on Swave-E 1.0mm JST to JR type connector Wire length: 80mm

Zweite Generation des Bluetooth-Adapter für den SWAVE-W3 ESC ESC Einstellungen ändernFirmware-UpdateLive Telemetrie überwacht die Batteriespannung / ESC-Temperatur / Gas und Motordrehzahl, ohne den Fahrerstand zu verlassen.Unterstützt Android und iOS !Vorteile:extrem klein und kann somit über im Auto platziert werdenjedes ENSO BLUETH Modul hat einen eigenen Gerätenamen und ein eigenes Passwort, um Verwechslungen mit Geräten anderer Fahrer zu vermeiden. Längere Übertragungsreichweite im Vergleich zu den Bluetooth-Adaptern der ersten Generation ENSO BLUTH und ENSO BLUTH-II. Unterstützte ESC: - SWAVE-W3 (unterstützt nicht Swave-E, E2, W und W2 !!!)Unterstützte Plattformen: - Android und iOSGröße: - 1cm*1cm (ohne Kabel)Spannung: - 6.5 VoltENSO BLUTH wurde mit 20 gängigen Handymodellen getestet, ohne dass es zu Verbindungsproblemen kam. Die Spezifikationen der Mobiltelefone variieren jedoch von Land zu Land und Ensotech kann nicht die Kompatibilität mit allen Geräten garantieren. Für eine optimale Verbindung sollten Sie den Cache Ihres Telefons und unnötige Hintergrundanwendungen löschen oder Ihr Telefon neu starten.