Features:
Weight , the MWX chassis is lighter than the GL brass chassis and since most with this car run stock and super stock the heavy weight of the car naturally makes a difference. I basically shifted the weight into better positions to stabilize the handling while calming down the steering making the chassis wide everywhere is not optimal. High level competition has taught me this.
Due to the slightly heavier servo the car requires, I offset some of that Weight with a cutout under the servo.
Each chassis also comes with the infamous FPM (floating pod mount). to further enhance handling.
Instead of being forced to purchase a 50 dollar servo saver by using a sub par rack in the GTR MWX has once again re engineered another GL part to make better for the end user. With this unit you dont have to use the servo saver.
GL-BT-ESC-060 (without Built-in Bluetooth) Brushless Sensored Speed Control for 1/28 mini car.Change to 32-bit MCU with ultra-smooth, faster response with precise throttle, brake and reverses control.Support ~2.5A BEC ampere drawn which is raised up by ~70%.Support ~30A instant ampere drawn by the motor which is raised up by ~80%.Bluetooth Module for advanced programming and firmware update through the Mobile APPS.APPS will be available on both IOS and Android.Data Analysis through Mobile APPS(Current Input & Output Throttle, Temperature, RPM, Adv. Timing, Voltage and min. voltage, Max Temperature, RPM & Adv. Timing).Software:It is a new developed software with more advanced item functions addedEach item have small step to fine tune. Specifications:Battery Input Voltage: 2S lipoBEC: 6V/2.5A1/28 motor Limit: 9000kv or belowMax Ampere draw: ~30A per phaseSize: ~23.8x14.0x8.7mm(not include the plug)Weight: ~5.6g(without any wire installed)***********************************************************************The corresponding Bluetooth module GL-PC-60 must be ordered separately!Das dazugehörige Bluetooth Modul GL-PC-60 muss separat dazu bestellt werden!***********************************************************************
Manual
GL-BT-ESC-030-GTR(Built-in Bluetooth) Brushless Sensored Speed Control for 1/28 mini car *** Spezielle Variante für das GL GTR Chassis ***Change to 32-bit MCU with ultra-smooth, faster response with precise throttle,brake and reverses control. Support ~2.5A BEC ampere drawn which is raised up by ~70%. Support ~30A instant ampere drawn by the motor which is raised up by ~80%.Built-in Bluetooth device for advanced programming and firmware update through the Mobile APPS.APPS will be available on both IOS and Android.Real Time Data Analysis through Mobile APPS (Current Input & Output Throttle, Temperature, RPM, Adv. Timing, Voltage and min. voltage, Max Temperature, RPM & Adv. Timing). Software: It is a new developed software with more advanced item functions added.Each item have small step to fine tune. All update item functions information can be reviewed from the photos attached. Specs: Battery Input Voltage: 2S lipo BEC: 6V/2.5A
1/28 motor Limit: 9000kv or below
Max Ampere draw: ~30A per phase
Size: ~22.7x14.0x9.6mm (not include the plug)
Weight: ~5.6g(without any wire installed)Download Manual
GTR Alu Servo Saver neu mit Verbindungslink aus Aluminium.Wer bereits den GTR Alu Servo Saver (GL-GTR-OP-004) hat, kann diesen mit GL-GTR-OP-031) upgraden.GL-GTR-OP-030 = GL-GTR-OP-004 + GL-GTR-OP-031Installationsanleitung
Das neue GTR Chassis Kit von GL Racing.Manual Rev.02 Lieferung ohne Elektronik!Kugelgelenke an den vorderen Querlenkern, die dazu beitragen, das Spiel zu beseitigen, ohne jedoch die Geschmeidigkeit zu beeinträchtigen Einstellbare staubdichte zentrale und hintere Seitendämpfer Das Auto mit dem niedrigsten Schwerpunkt von GL Racing bis heute Super breite Einpresstiefe sorgt für extreme Stabilität des Fahrzeugs, selbst bei Verwendung von Felgen mit 0 Grad Einpresstiefe Die T-förmige Anordnung der zentralen und hinteren Dämpfer hat sich auf dem Markt durchgesetzt. Höhenverstellbare Motorhalterung (Optionsteile für die Höhenverstellung sind separat erhältlich) Vorderer Stabilisator mit Lagern (Option) Doppel-Lenkhebel-System kann auf Aluminium aufgerüstet werden und hat Saver-Fähigkeit (Option) Neue Version des Titanium Servo ist langlebiger und bietet präziseres Handling (separat erhältlich)Achtung:Die Bilder 2 und 3 zeigen teils bereits installierte Optionen, welche nicht im Chassis Kit enthalten sind und zusätzlich erworben werden müssen.Für die Fertigstellung des Autos wird noch folgendes benötigt;FernbedienungMikro-EmpfängerMotorServo (z.B. GL-0820-TG)ESC 2S LiPo battery (47x11x20mm JST-PH plug) RWD Felgen und ReifenKarosserie 98mmManual Rev.02
Speziell für den GL GTR
Technical Specifications:
Model: GL-SD-ESC-010T
Continuous current: 15A
Best Current (10sec): 30A
Battery Input: 3,7 Volt / 2cells, 1.2V NiMh/NiCd / 6cells
Bec output: 6 Volt / 1 A
Weight (without wiring): 4.1g
Dimension (L x W x H) mm: 25 x 15 x 8.5 mm
Mini-Z Motor limit with 2cell x 3.7V Lipo, The motor Timing is at 0 degree: 10000KV or below
Features:
Ultra-smooth, precise trottle and braking control
compatible with sensored/sensorless brushless motors
Data analysis capability (RPM, low voltage and ESC temperature)
Easily Programming throug the LED card (not included)
Built-in one touch On/Off switch with LED
Built-in Low voltage cut-off, Overheat protection and signal loss protection
Included:
Speed Control, Extended BEC wire, Sensor wireDownloads / Manuals (GL-SD-ESC-010T):ESC User GuidelineESC ProgrammierungESC Erklärungen
