Make your McLaren 720S Body much more durable with this CF bumper and Clip set. All new, redesigned to be more durable and more effective. Also has holes for body posts for those that prefer to use them.
Carbon front bumper to be used together with the body mount to mount the Jomurema GT01 bodywork in ABS.Install the two columns on the carbon front bumper (narrow front holes) using the two flared screws, above the columns (aluminum or brass) fix the Body Mount using the two rounded screws.
It is possible to use the two columns in aluminum, or in brass if you want to have more weight on the front.
Included:1 x Carbon Front Bumper2 x Small 5mm Aluminum Columns2 x Small 5mm Brass Columns1 x Body Mount2 x M2x4 Dome Screws2 x M2x4 Countersunk Screws
Carbon front bumper to be used to mount the Jomurema GT01 ABS body.The columns are included in the kit.
Included:1 x Carbon Front Bumper2 x Plastic Colums2 x Screws M2x5
New bumpers for the Jomurema body.Xbility has released three new bumpers designed specifically for the Jomurema GT01 Body, giving you the option to move the body up to 2 mm forward. A small change that completely transforms how the car behaves on track — more rotation, more direction, and a very different balance depending on the position you choose. These bumpers also allow the use of optional weights, giving you more control over the front balance and overall stability.
This is designed to use the body posts for either the lexan or hardbody. This product does not contain a traditional front clip.
LOWER PLATE ONLY FOR THE KYOSHO C8 CORVETTE BODY
THE PLATE ONLY FITS THE MWX JMA BUMPER KIT SO IN ORDER TO USE THIS PLATE YOU NEED TO PURCHASE A JM BUMPER KIT
JOMUREMA BUMPER KIT (MX-JMA-23) - MWX Performance
When you think innovation, you don't often think body posts, however these are one of the favorite products we have released. Our all new body post system is full of little details that will make your car look cleaner, make it more durable and also allow you to adjust you body height easier and more precisely than before.
Front Bumper für Lexan Karosserien1.5mm CFK, MattVerschiedene Montagelöcher für Body Posts für eine optimale Positionierung, je nach KarosserieKompatibel mit GLR, GL-GT, GTR, RX28, MWX R.1, Nexx Specter, Atomic, MR03, MR04 uvm.Grösse: 78.5 x 35mmGewicht: 3.1g
These sleek-looking steel bumper weight set allow you to fine tune your weight bias on your Mini-Z when used in combination with any of our Carbon Fiber Bumpers. When running on bumpy or high grip environments, playing around with a little bit of nose weight can impact tremendously the behavior of your car. This weight set allows you to fine tune your nose weight in 1g increments. This is easily achieved by stacking the thru-hole weights and then clamping them down on the bumper with the threaded weight on top.
Included in the set is:
2x 1g thru weights
1x 1g threaded weight
1x M2x4CS Screw
1x M2x6CS Screw
Dry carbon and CNC machined weighted bumper system for lexan bodied 1/28 scale cars
This is one of the quickest and easiest way to tame down the steering of your Double A arm cars like the GL GT and the Reflex R28 but also work great for quick changes to even the MWX GLR.
Passend für den MWX R.1, GL GLR / GLR-GT / GTR, PN 2.0/3.0, MR03,...
Dry carbon and CNC machined weighted bumper system for lexan bodied 1/28 scale cars
This is one of the quickest and easiest way to tame down the steering of your Double A arm cars like the GL GT and the Reflex R28 but also work great for quick changes to even the MWX GLR.
Passend für den MWX R.1, GL GLR / GLR-GT / GTR, PN 2.0/3.0, MR03,...
Carbon-Frontstossstange mit Schaumstoffdämpfer für Lexan Karosserien. Passt für die meisten Lexan Karrosserien im GT Style.Verstellbares Body Post Befestigungssystem sorgt für eine perfekte Übereinstimmung mit den Löchern im Body. Kompatibel mit den meisten Mini-z Chassis: RTA, MR03, GLA, GLR... abhängig von der verwendeten RTRC- Body Mount Base.
Wird mit 6 Befestigungsschrauben und zwei Befestigunspfosten geliefert. Hinweis:Für die Verwendung mit einem RTA oder MRZ Chassis wird die Body Mount Base RT074 benötigt.Für die Verwendung mit einem GL Racing (GLR, GLA, GLR-GT,..), Kyosho MR03, Nexx Racing (Bison, Skyline, Specter) oder PN Racing Chassis wird die Body Mount Base RT075 benötigt.
Delivered with 6 fixing screw and 2 body posts.
Carbon front bumper for the Jomurema to strengthen its body. New sliding body post fixation system ensure a perfect match with the body holes. The V2 version includes the carbon nose and the carbon height shim perfectly adapted to the body.
Compatible with most Mini-z chassis: RTA, MR03, GLA, GLR… depending on the RTRC bumper mount base you have. Delivered with 4 screws.
Lierferumfang:- Carbon Body Clip für die Audi R8 Evo Karosserie von GL RacingBitte separat bestellen:- Aluminium Grundplatte (ME-01-s / ME-01-b)- Distanzplättchen (ME-01-SP)
Front Bumper für Lexan Karosserien1.5mm CFK, MattVerschiedene Montagelöcher für Body Posts für eine optimale Positionierung, je nach KarosserieKompatibel mit GLR, GL-GT, GTR, RX28, MWX R.1, Nexx Specter, Atomic, MR03, MR04 uvm.Grösse: 78.5 x 35mmGewicht: 2.6g
Front Bumper für Lexan Karosserien1.5mm CFK, MattVerschiedene Montagelöcher für Body Posts für eine optimale Positionierung, je nach KarosserieKompatibel mit GLR, GL-GT, GTR, RX28, MWX R.1, Nexx Specter, Atomic, MR03, MR04 uvm.Grösse: 78.5 x 30mmGewicht: 2.9g
Front Bumper für Lexan Karosserien1.5mm CFK, MattVerschiedene Montagelöcher für Body Posts für eine optimale Positionierung, je nach KarosserieKompatibel mit GLR, GL-GT, GTR, RX28, MWX R.1, Nexx Specter, Atomic, MR03, MR04 uvm.Grösse: 78.5 x 30mmGewicht: 2.3g
Front Bumper für Lexan Karosserien1.5mm CFK, MattVerschiedene Montagelöcher für Body Posts für eine optimale Positionierung, je nach KarosserieKompatibel mit GLR, GL-GT, GTR, RX28, MWX R.1, Nexx Specter, Atomic, MR03, MR04 uvm.Grösse: 78.5 x 25mmGewicht: 1.9g
This bumper was developed to be in compliance with the 2024 PNWC Bumper Rules. The new requires there to be a 2mm gap between bumper and body if the bumper is made out of CF. This bumper retains the same shape as the RX528 Mako Bumper, but also has a nested, front TPU liner which satisfies the rule as the leading edge is now made from flexible, rubber like material (albeit, still super rigid).
This bumper is slightly heavier, but not by much. We recommend using CA to attach the bumper more securely to the CF part.
Front Bumper für Lexan Karosserien1.5mm CFK, MattVerschiedene Montagelöcher für Body Posts für eine optimale Positionierung, je nach KarosserieKompatibel mit GLR, GL-GT, GTR, RX28, MWX R.1, Nexx Specter, Atomic, MR03, MR04 uvm.Grösse: 74 x 25mmGewicht: 1.8g
Front Bumper für Lexan Karosserien1.5mm CFK, MattVerschiedene Montagelöcher für Body Posts für eine optimale Positionierung, je nach KarosserieKompatibel mit GLR, GL-GT, GTR, RX28, MWX R.1, Nexx Specter, Atomic, MR03, MR04 uvm.Grösse: 74 x 20mmGewicht: 1.9g
Sturdy, good looking and lightweight, this bumper is perfect to mount "Pan Car" Type bodies on your 1/28th scale car. The design splits the front posts further apart than others in the market for better body support. This leads to better steering and longer lasting bodies.
Neu mit Alu Frontplättchen und nur 0.3g schwererCarbon fiber and Alunimum Bumper/Mount für den Jomurema GT01 Body.Passend für den MWX R.1, GL GLR / GLR-GT / GTR, PN 2.0/3.0, MR03,...
Front Bumper für Lexan Karosserien1.5mm CFK, MattVerschiedene Montagelöcher für Body Posts für eine optimale Positionierung, je nach KarosserieKompatibel mit GLR, GL-GT, GTR, RX28, MWX R.1, Nexx Specter, Atomic, MR03, MR04 uvm.Grösse: 74 x 25mmGewicht: 1.8g
Nichts Revolutionäres hier. Allerdings ist diese Stossstange und Clip-Set sehr robust und leichter als die anderen Stoßstange / Clip Alternativen die es gibt. Kommend in einem knappen 3,9 g ist es kaum schwerer als eine Legierung und Kohlenstoff-Halterung Combo. Die Stoßfänger/Clip-Kombinationen sind ein Muss, um die Lebensdauer Ihrer Karosserien zu verlängern. In diesem Fall die neue PN Racing C9 Karosserie.***Nothing Revolutionary here. However this bumper and clip set is very tough and lighter than the other bumper/clip alternatives out there. Coming in at a scant 3.9g it is barely heavier than an alloy and carbon mount combo. The bumper/clip combos are a must to increase the lifespan of your bodies. In this case the new PN Racing C9 Body.
Lierferumfang:- Carbon Body Clip für die Lamborghini Karosserie von GL RacingBitte separat bestellen:- Aluminium Grundplatte (ME-01-s / ME-01-b)- Distanzplättchen (ME-01-SP)
Aluminium interchangeable front body mountGrundplatte aus Aluminium zum montieren der vorderen Karbon AdapterKompatibel mit den meisten Karbon Adapterplatten von PN Racing, GT55 usw.Lieferumfang:- Grundplatte - Distanzplättchen aus Karbon
Nichts Revolutionäres hier. Allerdings ist diese Stoßstange und Clip-Set sehr robust und leichter als die anderen Stoßstange / Clip Alternativen da draußen. Kommend in einem knappen 3,9 g ist es kaum schwerer als eine Legierung und Kohlenstoff-Halterung Combo. Die Stoßfänger/Clip-Kombinationen sind ein Muss, um die Lebensdauer Ihrer Karosserien zu verlängern. In diesem Fall die sehr beliebte Jomurema GT01.***Nothing Revolutionary here. However this bumper and clip set is very tough and lighter than the other bumper/clip alternatives out there. Coming in at a scant 3.9g it is barely heavier than an alloy and carbon mount combo. The bumper/clip combos are a must to increase the lifespan of your bodies. In this case the vey popular Jomurema GT01.
