These are tuned 1/28 scale servos. After months of testing we were able to come up with an excellent tune. Another feature that we had concern with was the "wandering" and constantly having to adjust left and right endpoints. This is no longer an issue with the MWX servos AT THIS TIME THESE DO NOT FIT THE FORMULA R1.THIS IS BEING WORKED ON AND RELEASED SOON

Micro size 2kg / 3kg full metal programmable coreless digital servo with JST1.5 connector plug for mini-z rc car  Operating speed:            Stall torque: 4.8V - 0.072 sec/60°        4.8V - 2.0 kg/cm (28oz-in) 6.0V - 0.065 sec/60°        6.0V - 2.2 kg/cm (31oz-in) 7.4V - 0.055 sec/60°        7.4V - 2.5 kg/cm (35oz-in) 8.4V - 0.050 sec/60°        8.4V - 3.0 kg/cm (42oz-in) Gear material: Titanium Horn gear spline: 20T Φ3.5 (compatibel mit GLR, AGF usw.) Operating voltage: 4.8-8.4V Size: 0.79x0.31x0.74in  / 20x8x18.8 mm Case material: Full metal Weight:0.25oz Bearing: Metal bearing Motor type: Coreless Operating temperature: -15℃~+70℃ Operating travel  :≈180±10° Neutral position : 1520μsec Frequency: 1520uS Refresh rate: 333Hz Pules width range : 500-2500μsec Dead band width: 2μsec Connector wire length: 60mm Waterproof level: Dust & Water Splash Resistacne Programmable: Yes

AGFrc A06CLS V2 Coreless Titanium Gear 0.052sec 3.0kg-cm Micro Digital Servo for Mini Scale RC CarsHinweis:Spezielle Ausführung mit JST 1.5 Stecker und 20T Spline (20 Zähne) speziell für Mini Z Autos im Massstab 1:28 wie GL Racing GLD, GLA, GLR, GLF-1, GLR GT, RTRC RTA, Reflex Racing RX, Nexx Racing Specter.A06CLS V2 ist die neue Version des beliebten A06CLS Servo und wurde speziell für für MiniZ / 1:28 RC Racer  entwickelt. Dieses Servo ist extra klein und bietet trotzdem ein hohes Drehmoment mit bis zu 3.0kg-cm und bis zu einer Geschwindigkeit von 0.055sec bei 8.4V. Dank des zuverlässigen bürstenlosen Motors und des Titan-Getriebes ist die Leistung beachtlich. Es übernimmt die Vorteile des A06CLS-Servos ist neu aber für 2S (max. 8.4V) ausgelegt. Features:- Ultra light weight mini z servo- High accuracy tianium gear- High quality coreless motor- Fast cooling aluminum case- DIY parameter via USB programmer card- Design for mini z cars, 1/18, 1/24, 1/27, 1/28 Scale Cars such as GLR /GLA /GLF-1 /GL-Rider etc. Specification:- Operating Voltage: 4.8 - 8.4V- Operating speed: 0.075sec/60° @ 4.8V- Operating speed: 0.066sec/60°  @ 6.0V- Operating speed: 0.058sec /60° @ 7.4V- Operating speed: 0.052sec /60° @ 8.4V- Stall Torque: 1.8 kg-cm @4.8V- Stall Torque: 2.2 kg-cm @ 6.0V- Stall Torque: 2.6 kg-cm @ 7.4V- Stall Torque: 3.0 kg-cm @ 8.4V- Gear: Titanium- Motor: Coreless- Size: 20*8*17.8mm (0.78 x 0.31 x 0.70 in)- Weight: 7g- Connector Wire: JST1.5 - Spline: 20TLieferung mit Kunststoff-Servohorn!

USB Servo Programmer for OMG MR-20CF Servo an all other programmable OMG servos. USB Servo Programmer                                                                                                                                                               Operating System:Windows XP/Vista/Windows7/Windows8/Windows10(32/64bit)                               Application:Servo with Programmble Marked(computer image).     Electronic instruction manual:Please download the manual "Servo USB programmer" from the link as belowhttp://www.rcomg.net/en/file-70838-67232.html Please install software"Servo USB programmer setting software new" to your computer,you could download software from here:http://www.rcomg.net/en/file-70838-67231.html

AGFrc A06CLS V2 Coreless Titanium Gear 0.052sec 3.0kg-cm Micro Digital Servo for Mini Scale RC CarsHinweis:Spezielle Ausführung mit JST 1.5 Stecker und 20T Spline (20 Zähne) speziell für Mini Z Autos im Massstab 1:28 wie GL Racing GLD, GLA, GLR, GLF-1, GLR GT, RTRC RTA, Reflex Racing RX, Nexx Racing Specter.A06CLS V2 ist die neue Version des beliebten A06CLS Servo und wurde speziell für für MiniZ / 1:28 RC Racer  entwickelt. Dieses Servo ist extra klein und bietet trotzdem ein hohes Drehmoment mit bis zu 3.0kg-cm und bis zu einer Geschwindigkeit von 0.055sec bei 8.4V. Dank des zuverlässigen bürstenlosen Motors und des Titan-Getriebes ist die Leistung beachtlich. Es übernimmt die Vorteile des A06CLS-Servos ist neu aber für 2S (max. 8.4V) ausgelegt. Features:- Ultra light weight mini z servo- High accuracy tianium gear- High quality coreless motor- Fast cooling aluminum case- DIY parameter via USB programmer card- Design for mini z cars, 1/18, 1/24, 1/27, 1/28 Scale Cars such as GLR /GLA /GLF-1 /GL-Rider etc. Specification:- Operating Voltage: 4.8 - 8.4V- Operating speed: 0.075sec/60° @ 4.8V- Operating speed: 0.066sec/60°  @ 6.0V- Operating speed: 0.058sec /60° @ 7.4V- Operating speed: 0.052sec /60° @ 8.4V- Stall Torque: 1.8 kg-cm @4.8V- Stall Torque: 2.2 kg-cm @ 6.0V- Stall Torque: 2.6 kg-cm @ 7.4V- Stall Torque: 3.0 kg-cm @ 8.4V- Gear: Titanium- Motor: Coreless- Size: 20*8*17.8mm (0.78 x 0.31 x 0.70 in)- Weight: 7g- Connector Wire: JST1.5 - Spline: 20TLieferung mit Kunststoff-Servohorn!

Produktinformationen "GL Titanium Gear Servo for GLR/GLA/GLF-1 & GL-Rider" [GL-0820-TG]  GL Titanium Gear Servo for GLR/GLA/GLF-1 & GL-Rider Details: For GLR-GLA-V2.1,GLF-1 & GL-Rider Features: Full alloy casing Titanium gears Bearing Speed 0.05sec/60 @6.0V Torque:1.50kg cm @6.0V Weight 7g  

It is with alloy case and titanium gearsIt is ultra smooth compared with other servo of this size and provides a more Features:Full alloy casingTitanium gears Bearing Speed 0.05sec/60 @6.0V Torque:2.30kg cm @6.0V Weight 9.27g

AGF-RC Aluminum Servo Horn (20t)Passend für das Servo  AGF-RC A06CLS V2 sowie das Servo GL-0820TG (GL titanium gear servo) Spline: 20TVerzahnung: 20 ZähneLieferumfang:- 1 Aluminium Servo Horn

For GLA-V2, GLR, GLR-GT, GL-Drift-2022, GLF-1, GL-RIDERArtikelbezeichnung: GL003-DMG Alternative Artikelnummern: GL-Drift-S-025, GL-GT-S-035, GLF-S-016 Features: Alloy Top and Bottom Casing Full Metal gears Dual Bearing Speed:    0.06sec/ 60° @ 6.0V Torque:    1.10 kg . cm @ 6.0V Weight:    5g

V4 Programmable Servo Board Optional Programmer #500804UFor Mini-Z MR03 and PNR2.5W servo assembly, maximum input 5VComes one pair JST1.5 plugInstruction Download

For drivers who would like to use their favorite ESC or their favorite RX, but still use Kyosho Mini-Z servo, a new servo controller is needed. Furitek introduces a super-fast and micro-size Digital servo controller for Kyosho Mini-Z servo that gives high speed response and much better cornering. And with innovative design, the servo controller allows users to choose 4-level speed options: slow, normal, fast and very fast easily by soldering. Users can change the speed option with a touch of soldering without any extra devices.   Features: - Digital servo controller for Mini-Z MR03, AWD - High speed response, support up 400Hz - Extremely smooth and high resolution (12bit ADC) - Speed level options selectable and switchable. - Micro size with barely 1g in weight - Easy soldering - Can use with standalone receivers on many different chassis such as Mini-Z MR03/AWD, PNR2.5W, AMZ, AMR… - Support voltage: 5V-6V input   Specifications: - Dimensions (mm): 11(L)x7.5(W) - Weight: 1g - Voltage support: 5V-8V - ADC resolution: 12bit - Input signal: 50Hz-400Hz

Optionales USB Interface zum programmieren von dafür geeigneten AGF-RC ServosHierzu ist ein Windows Computer erforderlich mit Windows 7 oder 10. Die Servos werden direkt über den USB Port versorgt und müssen nur in das Interface gesteckt werden. In der Software kann zum Beispiel der Softstart, der Neutralpunkt, die Servowege angepasst (größer und kleiner) oder die Drehrichtung eingestellt werden. Des weiteren kann falls benötigt der Sanwa SSR Mode aktiviert werden was besonders für RC-Car Fahrer von Interesse ist. Ebenfalls kann die integrierte Überlastabschaltung in 3 Stufen angepasst werden und ausgewählt werden was bei einem Signalverlust passiert soll.Bitte beachten Sie das die Software aktuell nur Englisch ist! ----------------------------------------------------It is the "Plug and Play" type USB program card, easy to use and program the AGFrc servo. Pls note that this USB program card just can be used for AGFrc servo with ASS mark, such as A11, A50, A62, A66 A73, A80, A81 Series Servos). Software download from here: Download Softwareyou can download the ".exe" file directly or zip file as required. System Requirement - Operating Voltage: USB（5V/500mA) - Operating System: Windows XP/Windows Vista/Windows 7/Windows 8 /windows10 ( 32/64bit). - Application: AGFrc Programmable Servos with ASSmarked. Parameter Function Instruction 1. Servo Angle: Set the servo rotation angle 2. Servo Neutral: Set the servo neutral position Note: While the transmitter turn to the neutral position, if the servo do not stay in the corresponding position, it can modify this value to adjust the servo horn. This is equivalent to the trimming of transmitter channel. 3. PWM Power: Adjust the servo output power. The higher the power, the higher the servo torque and speed, current consumption will be high as well. 4. Damping Factor: Set the servo damping. 5. Sensitivity: Adjust the servo dead band (sensitivity). 6. Soft Start: Slowly restoration while power on the servo. Once power on, the servo will gently turn to the position of current input signal. Note: This function is to prevent damage from servo incorrect mounting while power on. 7. Inversion: Set normal and reverse rotation of the servo. 8. Narrow Band: FUTABA SR Mode 9. SANWA SSR: SANWA SSR Mode Note: Enable this function, it can support SANWA SSR high speed mode. Servo angle may be not accurate, it need to re-adjust. 10. Lost PPM Protect: Signal loss protection, there are three functions for selection, a. Release: Non-Protection b. Keep Position: Stay in the position before the signal loss c. Go Neutral Position: Back to Neutral position (1500uS position) 11. Over Load Protect: Set the servo blocking protection, there are three levels, ticked to enable protection. Level 1: Set the starting time and power value of the primary protection. Level 2: Set the starting time and power value of the secondary protection. Level 3: Set the starting time and power value of the tertiary protection. Note: Left side is to set the protection starting time, right side is to set output power value after enable starting protection. 12. Servo Information: Servo information. Including servo model, version date, firmware name. Servo Name: Servo model Manufacture: Servo version date Firmware: Servo firmware name 13. Read: Read the servo parameter from the software interface. 14. Write: Write current parameter into servo. 15. Open: Open servo parameter file which saved on the computer. 16. Save: Save current servo parameter to the computer 17. UPF: Servo firmware upgrade function. 18. Default: Restore factory defaults. 19. Exit: Exit and close the configuration software

Ersatzgetriebe für das AGF-RC Servo A06CLS V1 und V2 Lieferumfang:Servo Getriebe Set (mit 20T Spline)PinLager

Spare gear set for Graupner DES131 servo. They don't break that easily, but it can happen, if your DES131 is broken, open it and check if one of the gears is broken, if so, this is what you need to fix it. For GLA and GLA-V2

V2 version, new molding, new precision Delrin servo gear set Including servo motor pinion 1st Gear one dot marking 2nd Gear 2 dots marking 3nd Gear 3 dots marking MUCH SMOOTHER like butter! (without pin set)