This RC receiver unit is Kyosho & Ko Propo ASF
compatible. It offers full 4-channel support in ultra- light weight and micro
size. It is ideal for micro racing cars.
Channels: 4CH
Weight: 3.5g
Dimension: 22×12mm
Compatibility
Compatible with ASF remote control system.
Suitable for remote control
KO PROPO EX-1 FHSS
KO PROPO EX-2
KO PROPO EX-6R
KO PROPO 903FH/904FH RF Module
Bind
- Press the BIND button and power on the receiver, the
receiver’s led will flash quickly.
- Put the transmitter into bind mode.
- The receiver’s led will flash slowly when the binding is
successful.
- Disconnect receiver’s power and reconnect the power cable
to the receiver.
- Now is should working normally.
This RC receiver unit is Kyosho/KO-FHSS full range of remote controls compatible. It offers full 4-channel support in ultra-light weight and micro size. It is designed for micro racing cars.
Features1)Modulation:Compatible all Kyosho/KO-FHSS2)Small size: 19*12mm(not including antenna)3)Super light: 2g(including antenna)4)Working voltage:3.7~8.4V5)High performance CPU enhance exactness control feeling6)4 channel support7)Added failsafe function8)Ideal for any micro RC racing chassis9)Comes with 3P 1.5mm plug
Kompatible Fernsteuerungen:
Kyosho KT-432Kyosho KT-531
Bind and FailsafePower on your transmitter and receiver. Adjust the transmitter for each channel to the exact position you want to have in failsafe mode. Transmitter set to pair mode. The receiver led should be on. Long press the pair button. After around 2 seconds the LED will turn to fast flashing first then turn to on status again. Now the pairing is done and the failsafe data is saved. Power off the transmitter and receiver then power on again then the receiver will work.
FS-RM005 is a module used with Flysky Noble NB4.It adopts Mini-Z FHSS system and can be adapted to Kyosho Mini-Z RWD, AWD, 4X4, FWD and Buggy.
Product Model: FS-RM005
Built for: Flysky Noble NB4
Wireless Frequency: 2.4GHz
Transmission power: <20 dBm (EU)
Wireless Protocol: Mini-Z(FHSS)
Power: 3.3±0.1V
Antenna type: Built-in single antenna
Temperature range: -10 ? — + 60 ?
Humidity range: 20% -95%
Online Update: Yes
Dimensions: 34*18*5.2mm ( without the protective cover)
Weight: 2.3g
Certification: CE,MIC,FCC ID:N4ZRM005
Notice: Before using the FS-RM005, the Noble NB4 should be uploaded to the FW 2.0.99 (check the changelog carefully before updating)
Installation1. Remove the base of the NB4 correctly install the module into the transmitter handle, click [Model ], select the radio frequency setup as Mini-Z (FHSS);2. Power on the receiver while pressing the receiver’s bind button, and the receiver’s LED light flashes quickly;3. Click [Rx SET] and select the Bind Set. After the receiver flashes slowly, the transmitter will exit the code matching state, and the receiver indicator will always be on to indicate successful code matching;4. Check whether the transmitter, receiver, and model work normally. If you need to bind again, please repeat steps 2-3.
CompatibilityThe FS-RM005 module is compatible with NB4, etc.The FS-RM005 module is compatible with Kyosho FHSS Mini-Z RWD AWD 4X4 FWD and Buggy. etc.