This part is compatible with the RTA servo saver (RT103).It allows quick adjustment of your RTA’s ackermann:
Blue position: Fast track layout
Green position: Mixed track layout
Red position: Twisty track layout
BE CAREFUL : The red position can be used only if some modifications are made on the front end (RT003 V2) to give more clearance to the ball caps.
Made in high quality aluminium 7075-T6.
Nur Kompatibel mit der RTA V1.2 Front!New version of the front arms of the RTA.
A lot of tests have been made in order to create arms capable of meeting the following specifications:
Revisited arms axes to make disassembly / maintenance / reassembly easier on the RTA
Modification of lower arms to allow to use anti-roll bar system
Perfect production tolerances in order to have the same Left / Right characteristics.
A perfect ball diameter ensuring movement without play or friction
More resistant material to wear and shocks
Original knuckles left and right for RTA chassis.
Optimized V1.2 part.
Camber : 2°
These parts are machining in good quality anodized aluminium 7075-T6.
Original knuckles left and right for RTA chassis.
Optimized V1.2 part.
Camber : 1°
These parts are machining in good quality anodized aluminium 7075-T6.
New version of the lexan friction plate. Its new shape allows easier access to the ESC to turn it on. Moreover, the carbon is now chamfered to limit friction with the friction discs.For RTA V1.2 98mm version.
Original knuckles left and right for RTA chassis.
Optimized V1.2 part.
Camber : 0°
These parts are machining in good quality anodized aluminium 7075-T6.
New ball bearing set for RTA chassis.
Reduced friction and increased lifespan.
Very high quality bearings. Tested and validated for use on any type of mini-z.
Contents of the set:
6 * 3 * 2.5mm => 9pcs
6 * 2 * 2.5mm => 1pcs
New version of the front shocks of the RTA.
A lot of tests have been made in order to create shock absorbers capable of meeting the following specifications:
Optimized damping to limit hopping as much as possible
The ring does not unscrew even without adding threadlocker
More resistant material
Exceptional injection quality
Ensures optimal suspension operation without friction
Ball joints set for RTA chassis. Fits only on Steering turnbuckles set RTA V1.2 ( RT011 V1.2).
This kit is composed of 2*3mm ball joints and 4*2.5mm ball joints.
These parts are injected in good quality plastic.
Optimized version V1.2 of steering turnbuckles set for RTA chassis.
RT010 V1.2 + RT011 V1.2 fits perfectly on RTA V1 and RTA V1.2.
These parts are machining in good quality stainless steel.
Servo mount for RTA chassis.
These parts are machining in good quality anodized aluminium 7075-T6.
This mount fits most commercially available mini-z servos. Just need to turn the part 180 ° to adapt it to the servo size.
These parts made of 7075-T6 aluminum black anodized keep the battery in position on the RTA.
The system allows you to change the Lipo quickly by simply turning one of the arms.
This system is mounted on the RT088 center pivot part.
The RT015 V1.2 + RT088 assembly fits perfectly on RTA V1 and RTA V1.2.
2 solutions are possible for the assembly of these parts in order to guarantee a constant maintenance of the Lipo over time:
Locking of the countersunk screw using thread locker.
Locking of the countersunk screw using the grub screw.
Optimized version V1.2 of friction discs for RTA chassis.
Its improvement consists of a more constant glide and a bigger reserve of grease.
These parts are machining in POM. This material gives the discs incomparable sliding power.
Optimized version of the RTA engine mount:
Allows quick and stable gap adjustment between spur and pinion without having to disassemble any part.
Better surface quality from machining and anodizing.
Aluminium plate motor mount for RTA chassis.
Reduced manufacturing tolerances and reworked aesthetics.
This part is machining in good quality anodized aluminium 7075-T6.
Braces friction plate set for RTA chassis.
If you are using body post at the rear to hold the body, you can replace the lateral body mounts by these braces.
These parts are machining in good quality anodized aluminium 7075-T6.
Optimized version V1.2 of Diff holders for RTA chassis.
Reduced manufacturing tolerances and better tightening of the ball bearing.
These parts are machining in good quality anodized aluminium 7075-T6.
Front body mount for RTA chassis.
This part allows the adaptation of most commercial carbon body mounts.
This part is machining in good quality anodized aluminium 7075-T6.
