Hochwertiges Metallgehäuse für alle Nano Receiver mit Tower Antenne und GYRO.- schützt den Receiver optimal- leichtes GehäuseLieferumfang:- leeres Gehäuse ohne Receiver !

FUTABA T-FHSS NANO 4CH TOWER ANTENNA RECEIVERVariante mit PVC Gehäuse Description:This RC receiver unit is FUTABA T-FHSS compatible. It offers full 4-channel support in ultra-light weight and micro size. Features:1. Futaba 2.4GHz T-FHSS compatible2. High performance CPU enhance precision control feeling3. 4 channel support4. Nano size (19mm x 12mm)5. Added failsafe function6. Operating Voltage 3.5V - 12V7. Weight: 3g Link Procedure:Each transmitter has an individually assigned, unique ID code. In order to start operation, the receiver must be linked with the ID code of the transmitter with which it is being paired. Once the link is made the ID code is stored in the receiver and no further linking is necessary unless the receiver is to be used with another transmitter.1-Place the transmitter and the receiver close to each other within half (0.5) meter.2-Place the transmitter into the linking mode and turn on the receiver3-During countdown, push the receiver tact switch for approximately 2 seconds. The LED will begin to blink red. After the receiver LED switches from blinking red to green - red steady light, If the transmitter and receiver are linked normally, set the power switch to the OFF position and then turn on the PWR ON position. If the receiver LED lights green, linking was succeeded. Actually check servo operation. Normal mode / High Speed mode:The‘Normal mode’accepts any type of servos or the peripheral. The "High Speed mode" only accepts the digital servos, including BLS series, and most peripheral equipment such as the brushless ESCs. Please pay special attention to the information contained within this manual and transmitter manual in order to have a pleasant running experience.

Receiver Einheit für das Mini-Z Evo Board kompatibel mit FUTABA T-FHSS Fernsteuerungen.Technische Daten:Funkfrequenz: 2,4 GHzDrahtloses Protokoll: T-FHSS Reichweite: > 50m (Boden)Antennentyp: EinzelantenneAbmessungen: 20*14*3,5 mmkompatibel mit Mini-z EVO Board

This is the first Futaba T-FHSS compatible micro surface receiver in the world. It offers full 4-channel support in ultra-light weight and micro size. It is ideal for micro racing cars. Features:1. Futaba 2.4GHz T-FHSS compatible2. High performance CPU enhance precision control feeling3. 4 channel support4. Micro size (19mm x12mm)5. Ideal for any micro rc racing chassis6. Added failsafe function7. Operating Voltage 3.7V - 8.4V:8. Weight: 2g Compatible Transmitters:Futaba 7PX 4PX 7XC 4GRS 4PV 4PM 4PLS Transmitter Two-way High Speed ReceiverPackage Included:1 x Receiver Procedure:Each transmitter has an individually assigned, unique ID code. In order to start operation, the receiver must be linked with the ID code of the transmitter with which it is being paired. Once the link is made the ID code is stored in the receiver and no further linking is necessary unless the receiver is to be used with another transmitter.Place the transmitter and the receiver close to each other within half (0.5) meter.Place the transmitter into the linking mode and turn on the receiverDuring countdown, push the receiver tact switch for approximately 2 seconds. The LED will begin to blink red. After the receiver LED switches from blinking red to green - red steady light, If the transmitter and receiver are linked normally, set the power switch to the OFF position and then turn on the PWR ON position. If the receiver LED lights green, linking was succeeded. Actually check servo operation. Normal mode / High Speed mode:The " Normal mode " accepts any type of servos or the peripheral. The "High Speed mode" only accepts the digital servos, including BLS series, and most peripheral equipments such as the brushless ESCs. Please pay special attention to the information contained within this manual and transmitters manual in order to have a pleasant running experience.

Hochwertiges Metallgehäuse für alle Nano Receiver mit Tower Antenne.- schützt den Receiver optimal- leichtes GehäuseLieferumfang:- leeres Gehäuse ohne Receiver !

FUTABA T-FHSS NANO 4CH TOWER ANTENNA RECEIVERVariante ohne Gehäuse!Neu mit schwarzen Anschlusssteckern. Description:This RC receiver unit is FUTABA T-FHSS compatible. It offers full 4-channel support in ultra-light weight and micro size. Features:1. Futaba 2.4GHz T-FHSS compatible2. High performance CPU enhance precision control feeling3. 4 channel support4. Nano size (19mm x 12mm)5. Added failsafe function6. Operating Voltage 3.5V - 12V7. Weight: 3g Link Procedure:Each transmitter has an individually assigned, unique ID code. In order to start operation, the receiver must be linked with the ID code of the transmitter with which it is being paired. Once the link is made the ID code is stored in the receiver and no further linking is necessary unless the receiver is to be used with another transmitter.1-Place the transmitter and the receiver close to each other within half (0.5) meter.2-Place the transmitter into the linking mode and turn on the receiver3-During countdown, push the receiver tact switch for approximately 2 seconds. The LED will begin to blink red. After the receiver LED switches from blinking red to green - red steady light, If the transmitter and receiver are linked normally, set the power switch to the OFF position and then turn on the PWR ON position. If the receiver LED lights green, linking was succeeded. Actually check servo operation. Normal mode / High Speed mode:The‘Normal mode’accepts any type of servos or the peripheral. The "High Speed mode" only accepts the digital servos, including BLS series, and most peripheral equipment such as the brushless ESCs. Please pay special attention to the information contained within this manual and transmitter manual in order to have a pleasant running experience.

Hochwertiges und edles CNC Metallgehäuse für Nano/Micor Receiver mit Antenne mit einer Grösse von 19 x 12 mm.- schützt den Receiver optimal- CNC gefrästes GehäuseLieferumfang:- leeres Gehäuse ohne Receiver !Passt nicht für die Sanwa Receiver, da diese den Setup Button an einer anderen Position haben.Passt nicht für "antenna less" Receiver und nicht für Receiver mit Tower Antenne.