NEXX RACING V-line Front Suspension system is designed with innovative features such as quick adjustable caster, quick adjustable camber, adjustable ride height…. It makes the Mini-Z looks much like a real car, not only fast but also stable, better cornering and better suspension overall. With locknuts and kingpins, V-LINE is designed to minimize most of the play resulting very smooth performance. The V-LINE suspension systems fits only Mini-Z MR03 wide base models and also fits PN 2.5 Chassis. For easy assembly, we pre-install the V-LINE suspension system at factory so it’s very easy and fast to assembly it on the Mini-Z.COLOR: REDV-LINE SUSPENSION SYSTEM FEATURESV- line suspension is designed with 2 V-shaped suspension forks to bring you a cool suspension system·Same width as stock. (MR02/ MR03 PNR2.5W Chassis width)·Suspension movement use ball joints instead of sliding knuckle and locknut easy adjustment play between knuckle and upper arm make joints will not pop out even during hard collision.·Adjustable camber from 0-30 degrees with 4 position eccentric shaft with easy operation·Quick adjustable caster by caster bar from 0-1.90 ·Both 00 and 10 lower A arms provided to facilitate suspension setup·Ride height adjustment with turn of a screw·All 3 tie rods 00, 0.50, 10 included ·High quality Precision CNC Swiss 7075 aluminumAnleitung V-Line
Features:Nexx Racing introduces new MR03W Mono suspension system.Designs based on full scale car model for realism.Replacement of stock suspension system.Provides better control of roll center and suspension geometry while travelling.Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.Same width as stock (W).Same ride height as stock.Same steering bar as stock (toe 0 degree).Guarantees no steering pump as suspension travels.CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.Caster angle is +1° degrees.Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.Anleitung NX-274 MR03 Mono Suspension Setup
NEXX RACING V-line Front Suspension system is designed with innovative features such as quick adjustable caster, quick adjustable camber, adjustable ride height…. It makes the Mini-Z looks much like a real car, not only fast but also stable, better cornering and better suspension overall. With locknuts and kingpins, V-LINE is designed to minimize most of the play resulting very smooth performance. The V-LINE suspension systems fits only Mini-Z MR03 wide base models and also fits PN 2.5 Chassis. For easy assembly, we pre-install the V-LINE suspension system at factory so it’s very easy and fast to assembly it on the Mini-Z.COLOR: BLACKV-LINE SUSPENSION SYSTEM FEATURESV- line suspension is designed with 2 V-shaped suspension forks to bring you a cool suspension system·Same width as stock. (MR02/ MR03 PNR2.5W Chassis width)·Suspension movement use ball joints instead of sliding knuckle and locknut easy adjustment play between knuckle and upper arm make joints will not pop out even during hard collision.·Adjustable camber from 0-30 degrees with 4 position eccentric shaft with easy operation·Quick adjustable caster by caster bar from 0-1.90 ·Both 00 and 10 lower A arms provided to facilitate suspension setup·Ride height adjustment with turn of a screw·All 3 tie rods 00, 0.50, 10 included ·High quality Precision CNC Swiss 7075 aluminumAnleitung V-Line
Features:Nexx Racing introduces new MR03W Mono suspension system.Designs based on full scale car model for realism.Replacement of stock suspension system.Provides better control of roll center and suspension geometry while travelling.Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.Same width as stock (W).Same ride height as stock.Same steering bar as stock (toe 0 degree).Guarantees no steering pump as suspension travels.CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.Caster angle is +1° degrees.Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.Anleitung NX-274 MR03 Mono Suspension Setup
NEXX Racing Mini-Z MR03 Front Suspension Spacer (BLACK) is used to replace MR03 plastic spacer when installing optional double A-arm V-LINE from NEXX RACING or PN Racing Double A-Arm Front Suspension or PN Racing MR3051 tower bars. It eliminates the need of cutting off partial of the MR03 plastic spacer when using the optional front suspensions.*** Do not work with stock Kyosho Mini-Z front suspensionMaterial: Aluminum 7075Color: Black anodizing color