Complete kit to update your GLF to world class performance! Kit includes:Side SpringsCenter SpringsBody PostUpper DeckCantilevers ZS O-Ring AxlesFPM (Free Pod Mount)Pivot Ball SpacerFPM Roll Center ShimRed Center Shock CollarRed Center Shock Droop Stop
This brace keeps the upper arms from wiggling around from the slop. the car will track straight and have more precise steering. It's a must have for the GLF
In the GLF world we all have figured out that the brass chassis is just too heavy. Yes it drives better and is stable but due to the weight it accelerates slow and lap time's are slower. On the flipside the stock carbon chassis is great but it has a tendency to traction roll when pushed especially on high grip. So using the same theory as our national championship winning GLR chassis we have come up with a new design that is heavier than the carbon but also wider which promotes stability without hindering acceleration! With this chassis you can push the car hard and run the stickier 21 fronts and not have to cut them down as much.
Farbe: Schwarz
High Quality Double Shield Ceramic Bearing Set for your 1/28th scale car with 3mm front axles.These bearings have very low axial play and spin super free.
Roller Blades für den original Front Spoiler des GLF-1.Vermindert deutlich das Anhängen an der Bande mit den Spoiler.Durch die seitlichen Kugellager wird das Auto zurück auf die Bahn gelenkt.Für die Fertigstellung werden 4 Kugellager (Mini-Z Grösse: 2.5x6x3mm) benötigt.
Die Version 2 der beliebten Front Achsen mit Innengewinde. Jetzt aus Titanium für mehr Haltbarkeit. Die V2 Achsen ermöglichen es, den vorderen Offset um 1mm Spurweite in Schritten von 0,5 mm durch die mitgelieferten M3x0,5 mm Axle Shims anzupassen. Die Achsen mit umgekehrtem Gewinde sind kompatibel mit dem Reflex Racing RX28 und auch GL Racing oder RTRC Fahrzeugen. Durch die Umkehrung des Gewindes und die Verwendung einer Schraube anstelle einer Mutter, ist es weniger wahrscheinlich, dass sich die Frontpartie Ihres Fahrzeugs in den RCP-Schienen verfängt, wenn Sie Räder mit geringerem Offset fahren. Das Kit wird mit 2 Achsen, 4 Stück M3x0,5 Kupferscheiben und 2 Stück M2x4mm Kopfschrauben geliefert. Tipp! Abhängig vom verwendeten Radtyp kann es vorkommen, dass die Achsen ein wenig axiales Spiel haben (minimal). Sie können dies durch leichtes Abschleifen der äußeren Achse beheben, um sie etwas schmaler zu machen. *****************************This is the V2 of our reverse axles. Now made from Titamium for more durability. The V2 axles allow you to adjust your front offset 1mm of trackwidth in increments of 0.5mm though the included M3x0.5mm Axle Shims. Reverse thread axles compatible with your Reflex Racing RX28 and GL/Atomic cars. By reversing the thread and using a screw instead of a nut, the front end of your car is less likely to snag into the RCP rails when running lower offset wheels. The kit comes with 2 Axles, 4pcs of M3x0.5 Copper Shims and 2pcs of M2x4mm button head screws. Tip: Depending on the type of wheel you use, sometimes, the axles can have a little bit of axial side to side play (minimal). You can tighten this up by lightly sanding the outer axle to make is slightly narrower.
Front & rear wing for GLF1 (GL Racing) made by Z-Performance-Parts.
This 2 version has more stability on Frontwing and changed details on rear wing and hole fittings also.
For GLR and GLF
GLR / GLF Central Shock Long Spring Set - Soft
This set of Springs are all softer than the Stock Central long spring, for low traction surfaces.
Red
Softest
Green
Yellow
Stock
Blue
Purple
Hardest
