Color: BlackDSK-701 2.4GHz 4-Channel FHSS5 SSL Telemetry Receiver uses a tower antenna with exceptional range and response time. With a lightweight design and a small footprint, this receiver is great for Mini-z scale electric RC cars. Features:1. Sanwa 2.4GHz FHSS5U/FHSS5 Spread Spectrum System compatible2. Compatible with SSL (SUPER VORTEX Series, etc...)3. Ultra Response Mode (SUR)4. Extreme Response Mode (SXR)5. Dual ID system (able to bind with 2 transmitters)6. Micro size (19mm x 12 mm)7. Operating Voltage 3.5V - 8.4V8. Weight: 2g Indicator Function compatible:Indicator function can be checked signal strength connected transmitter. The indicator function can be used for finding problems as incorrect receiver placing and finding the best receiver position for transmitter. Indicator function can be checked signal strength without any effect with response. NOTE:RPM sensor (SNW107A41061A) and temperature sensor are not compatibleRPM and temperature telemetry are only capable with the Sanwa Super Vortex seriesFH5U RF mode is not capable to use telemetrySXR response mode is only compatible with transmitter M17. Compatible Transmitters:Sanwa M17Sanwa MT-5Sanwa MT-R Package Included:1 x Receiver  (Farbe: Schwarz)Bind:1.Turn on transmitter, enter [BIND] to be bind mode.2.Connect BIND plug in BIND port then turn on receiver.3.LED will change from slow flashing blue to fast flashing blue.4.Turn off receiver, remove BIND plug, then turn on.5.Finish BIND mode on transmitter.

Hochwertiges Metallgehäuse für alle Nano Receiver mit Tower Antenne und GYRO.- schützt den Receiver optimal- leichtes GehäuseLieferumfang:- leeres Gehäuse ohne Receiver !

Based on the RX471 Built specially with micro cars in mind, ultra light weight for low cg with micro JST sockets. Specifications: Nominal Input Voltage: 4.8-7.4V Weight: 0.065oz (1.9g) Dimensions: (21.5x15.0x7.5mm) Frequency: 2.4GHz FH3/FH4 Selectable Via Transmitter Fail-Safe Support: Yes (All Channels) Battery Voltage Fail-Safe Limit: 3.5-5.0V (FH3) / 3.5-7.4V (FH4)       Dimension: Length: 21.5mm Width: 15.0mm Height: 8.7mm (Plugs included)  

Hochwertiges Metallgehäuse für alle Nano Receiver mit Tower Antenne.- schützt den Receiver optimal- leichtes GehäuseLieferumfang:- leeres Gehäuse ohne Receiver !

SANWA NANO 4CH TOWER ANTENNA RECEIVERModel ohne Gehäuse Description:This RC receiver unit is Sanwa FHSS-4 and FHSS-3 compatible. It offers full 4-channel support in ultra-light weight and micro size. Features:1. Sanwa 2.4GHz FH3/FH4 Selectable Via Transmitter2. High performance CPU enhance precision control feeling3. 4 channel support4. Micro size (19mm x 12mm)5. Added failsafe function6. Operating Voltage 3.5V - 12V7. Weight: 3g Binding:1. Press the BIND button and power on the receiver, the receiver’s led will flash quickly.2. Put the transmitter into bind mode. The receiver’s led will flash slowly when the binding is successful.3. Disconnect receiver’s power and reconnect the power cable to the receiver. Now is should working normally. Compatible Transmitters:Sanwa M17Sanwa M12SSanwa M12Sanwa MT44Sanwa MT4SSanwa MT4Sanwa M11X Package Included:1 x Receiver4 x 1.5mm 3P JST plug with high quality silicon cable

SANWA NANO 4CH TOWER ANTENNA RECEIVERModel mit PVC Gehäuse Description:This RC receiver unit is Sanwa FHSS-4 and FHSS-3 compatible. It offers full 4-channel support in ultra-light weight and micro size. Features:1. Sanwa 2.4GHz FH3/FH4 Selectable Via Transmitter2. High performance CPU enhance precision control feeling3. 4 channel support4. Micro size (19mm x 12mm)5. Added failsafe function6. Operating Voltage 3.5V - 12V7. Weight: 3g Binding:1. Press the BIND button and power on the receiver, the receiver’s led will flash quickly.2. Put the transmitter into bind mode. The receiver’s led will flash slowly when the binding is successful.3. Disconnect receiver’s power and reconnect the power cable to the receiver. Now is should working normally. Compatible Transmitters:Sanwa M17Sanwa M12SSanwa M12Sanwa MT44Sanwa MT4SSanwa MT4Sanwa M11X Package Included:1 x Receiver4 x 1.5mm 3P JST plug with high quality silicon cable

Hochwertiges und edles CNC Metallgehäuse für Nano/Micor Receiver mit Antenne mit einer Grösse von 19 x 12 mm.- schützt den Receiver optimal- CNC gefrästes GehäuseLieferumfang:- leeres Gehäuse ohne Receiver !Passt nicht für die Sanwa Receiver, da diese den Setup Button an einer anderen Position haben.Passt nicht für "antenna less" Receiver und nicht für Receiver mit Tower Antenne.