All New RX28 Steel Chassis for your RX28G2 Plate Cars. This new chassis allow for fore and aft movement of 20mm wide batteries as well as making it compatible with our new 400mah batteries that are 24mm wide. This new chassis kit comes with lateral CF braces to locate the battery side to side, but also to stiffen the front to back structure of the car for more precise handling and higher corner speeds. The kit is finished off with a new forward center shock mount that incorporates a band-less battery hold down that is more reliable and easier to use.

Replacement chassis for the RX28SE / RX28SE Champions EditionThis includes the chassis screw-on weight holes that were added on the Champions Edition Chassis.

This all new chassis for your RX28SE Gen 2 changes the battery and shock mounting system slightly so that we can have more space to move the 340mah hardcase lipo fore and aft on the chassis, as well as allowing for our new 400mah LiHv battery to fit in the chassis in 98mm configuration. This chassis also sheds approximately 5-6g off of the chassis in higher areas ensuring that while the chassis gets lighter, the center of gravity does not suffer. The kit is finished off with a new forward center shock mount that incorporates a band-less battery hold down that is more reliable and easier to use.

The RX28SE Worlds Edition kits are here!This kit is basically a replica of the chassis that the team ran in Paris at the 2024 PNWC. It has all the refinements of the Champions edition, plus the new 24mm battery compatible chassis included. Much like the Champions edition, this is not a revolution, but rather an evolution of quality and attention to details that we have meticulously worked on getting ironed out over the last year since the release of the Gen 2 cars. Better tolerances, higher quality finishes, hard coated everything and extra attention to details to make the RX28 experience just a little bit better than before. The Worlds cars build on the great Gen 2 platforms and include all the refinements we have been working so hard at getting to you. New on the Worlds Edition:RX28SE-08 24mm Battery Compatible ChassisAnd of course all the improvements from the Champions Edition: Updated chassis with holes for screw on weights New Body Adjustable Body Post System (adjust body in 1mm increments) Revised motor mount with locating spline for tougher assembly and less flex, Updated Axle Carrier to include location for attaching rear mass damper. Reflex Racing 30 Degree Rear Radial 11mm and 14mm Tires and 40 degree 8.5 and 11mm low profile slicks. New Aluminum Main Damper with locking adjustment collar. Updated Front Shock Adjustment collars with laser engraved pre-load dial mark New Version 4 Ball Differential with Plastic Spur Gear Covers Updated hard-coated 7075 T6 aluminum pivots and damper pistons PLUS (all the items that had been Gen 2 running changes): New Damper Tubes New Ball Cups and Turnbuckles 30g Stainless Steel Chassis with Hard Coating for more durability, quality and performance vs brass All New Ultra Low CG Motor Mount for increased corner speed, lighter weight and more precise ride height adjustment. It allows virtually any motor in the industry to be a drop in to the mounting position. Allows gear adjustment from 9T-17T Pinions. Revised hardware throughout. Reflex Racing Speed Wheels Included Dimensions: 98mm Wheelbase 145g-170g weight RTR Depending on body and Electronics 69mm to 78mm Rear Track Width 72mm to 75mm Front Track Width Need to Complete: Body and either front clip or front bumper Wheels and Tires Electronics: Motor, Lipo Battery, ESC, Receiver and Servo (Please note, the provided servo horn is designed to work with Servo with 20T Spline. (AGFC A06CLS V2, GL, OMG, MWX, PN Anima works fine) *** ELECTRONICS ARE NOT INCLUDED!!! *** *** Gear Diff not included *** IMAGES ARE PRODUCTION SAMPLES - Some Features are not visible.  *********************************************************** Assembly Manual / Montageanleitung: RX28SE Gen2 Manual

The RX28D Worlds Edition kits are here! This kit is basically a replica of the chassis that the team ran in Paris at the 2024 PNWC. It has all the refinements of the Champions edition, plus the new 24mm battery compatible chassis included.  Much like the Champions edition, this is not a revolution, but rather an evolution of quality and attention to details that we have meticulously worked on getting ironed out over the last year since the release of the Gen 2 cars. Better tolerances, higher quality finishes, hard coated everything and extra attention to details to make the RX28 experience just a little bit better than before.  The Worlds cars build on the great Gen 2 platforms and include all the refinements we have been working so hard at getting to you. In and effort to more easily identify it, we are now going to call the double a-arm RX28 the "RX28D". New on the Worlds Edition: RX28A-39 24mm Battery Compatible Steel Chassis And of course all the improvements from the Champions Edition: Revised motor mount with locating spline for tougher assembly and less flex. Updated Axle Carrier to include location for attaching rear mass damper. Reflex Racing 30 Degree Rear Radial 11mm Tires and 40 degree front low profile slicks. New Aluminum Main Damper with locking adjustment collar. Updated Front Shock Adjustment collars with laser engraved pre-load dial mark New Version 4 Ball Differential with Plastic Spur Gear Covers Updated hard-coated 7075 T6 aluminum pivots and damper pistons   PLUS (all the items that had been Gen 2 running changes): New Damper Tubes New Ball Cups and Turnbuckles 30g Stainless Steel Chassis with Hard Coating for more durability, quality and performance vs brass All New Ultra Low CG Motor Mount for increased corner speed, lighter weight and more precise ride height adjustment. It allows virtually any motor in the industry to be a drop in to the mounting position. Allows gear adjustment from 9T-17T Pinions. Revised hardware throughout. Reflex Racing Speed Wheels Included   Dimensions: 98mm Wheelbase 145g-170g weight RTR Depending on body and Electronics 69mm to 78mm Rear Track Width 72mm to 75mm Front Track Width   Need to Complete: Body and either front clip or front bumper Wheels and Tires Electronics: Motor, Lipo Battery, ESC, Receiver and Servo (Please note, the provided servo horn is designed to work with Servos with 20T Spline. (AGFC A06CLS V2, GL, OMG, PN Anima and MWX will fit well). **** Electronics are not included ******** Gear Diff not included ****Assembly Manual / Montaganleitung:RX28D G2 Standard

The RX28K Worlds Edition kits are here! This kit is basically a replica of the chassis that the team ran in Paris at the 2024 PNWC. It has all the refinements of the Champions edition, plus the new 24mm battery compatible chassis included. Much like the Champions edition, this is not a revolution, but rather an evolution of quality and attention to details that we have meticulously worked on getting ironed out over the last year since the release of the Gen 2 cars. Better tolerances, higher quality finishes, hard coated everything and extra attention to details to make the RX28 experience just a little bit better than before.The Worlds Edition cars build on the great Gen 2 platforms and include all the refinements we have been working so hard at getting to you. New on the Worlds Edition: RX28A-39 24mm Battery Compatible Steel Chassis And of course all the improvements from the Gen 2 Champions Edition Revised motor mount with locating spline for tougher assembly and less flex, Updated Axle Carrier to include location for attaching rear mass damper. Reflex Racing 30 Degree Rear Radial 11mm Tires and 40 degree front low profile slicks. New Aluminum Main Damper with locking adjustment collar. Updated Front Shock Adjustment collars with laser engraved pre-load dial mark New Version 4 Ball Differential with Plastic Spur Gear Covers Updated hard-coated 7075 T6 aluminum pivots and damper pistons   PLUS (all the items that had been Gen 2 running changes): New Damper Tubes New Ball Cups and Turnbuckles 30g Stainless Steel Chassis with Hard Coating for more durability, quality and performance vs brass All New Ultra Low CG Motor Mount for increased corner speed, lighter weight and more precise ride height adjustment. It allows virtually any motor in the industry to be a drop in to the mounting position. Allows gear adjustment from 9T-17T Pinions. Revised hardware throughout. Reflex Racing Speed Wheels Included   Dimensions: 98mm Wheelbase 145g-170g weight RTR Depending on body and Electronics 69mm to 78mm Rear Track Width 72mm to 75mm Front Track Width   Need to Complete: Body and either front clip or front bumper Wheels and Tires Electronics: Motor, Lipo Battery, ESC, Receiver and Servo (Please note, the provided servo horn is designed to work with Servos with 20T Spline. (AGFC A06CLS V2, GL, OMG, PN Anima and MWX will fit well).   *** Electronics are not included ****** Gear Diff not included ***Assembly Manual / Montaganleitung:RX28D G2 Standard