NX-300 Nexx Racing Specter 1/28 RWD Chassis Kit

269,00 CHF*

% 299,00 CHF* (10.03% gespart)

Preis zzgl. allfälliger Versandkosten

Artikel-Nr.: NX-300

Ab CH Lager verfügbar, Lieferzeit 2-5 Tage

Produktinformationen "NX-300 Nexx Racing Specter 1/28 RWD Chassis Kit"

Das Specter RWD Chassis ist zu 100% aus hochwertigen Materialien gefertigt, darunter 7075 T6 Aluminium, POM, Kohlefaser, Edelstahl-Hardware und ein paar Kunststoffteile. Das Chassis-Kit ist einfach zu montieren und mit den vielfältigen Setup Möglichkeiten für Profis und Anfänger geeignet.

Spezifikationen:

Breite: 69mm (W)
Radstand: 98-102 mm
Gewicht: ~54g (nur Kit ohne Elektronik, Karo, Lipo, Servo,...)
Lipo Grösse max.: 22 x 46 x 13,7 mm (2S - 7,4V Lipo Akku)
Mikro-Servo kompatibel: 24-24.4mm x 7-11.5mm x 10.5-13.7mm
Einfache Einstellung des Nachlaufwinkels: 0 und 1 Grad.
Einfaches Einstellen des Sturzes (Camber): 0, 1 und 2 Grad.
Einfache und schnelle Einstellung des Radstandes (98-102mm).
Einstellung der Spur.
Einstellung der Bodenfreiheit.
Einstellung des vorderen und hinteren Federungssystems.
Austausch der Federn.
Servo Saver System (Cantilever System) wurde optimiert, um das Risiko eines Servo Getriebeschadens zu verringern (2 Modi: direkt und bevorzugt Servo Saver).
Kompatibel sowohl mit Lexan- als auch mit Hardbodies.
Extrem niedriger Schwerpunkt im Vergleich zu anderen.
64P 53T Hauptzahnrad
Kugeldifferenzial mit CNC-Getriebe

Das Chassis Kit wird bereits montiert geliefert!

Das Nexx Racing Specter 1/28 RWD Kit benötigt zum Fertigstellen:

1 x Motor
1 x ESC (2S Lipo ESC)
1 x Servo
1 x Lipo 2S - 7,4V (max. 22 x 46 x 13,7 mm )
1 x Mikroempfänger
1 x Karosserie (Hardbody oder Lexan*)
4 x Felgen und Reifen

*) Bei Verwendung einer Lexan Karro werden zusätzlich noch Body-Posts und ein Frontbumper benötigt.

0 von 0 Bewertungen

Gib eine Bewertung ab!

Teile deine Erfahrungen mit dem Produkt mit anderen Kunden.

Anmelden

Deine E-Mail-Adresse

Dein Passwort

Keine Bewertungen gefunden. Gehe voran und teile deine Erkenntnisse mit anderen.

ESC

Ensotech Swave W2 ESC

Wichtig: Der Swave W2 ESC wurde für die Verwendung von Ensotech™-zertifizierten Motoren und der jeweils neuesten Firmware optimiert. Die ESC wurden für den optimalen Einsatz und Schutz mit diesen zertifizierten Motoren entwickelt, die Leistungstests und Qualitätssicherung bestanden haben und die Qualifikationskriterien erfüllen. Diese Technologie hat sich bei vielen Rennfahrern und Podiumsplatzierungen bewährt, wenn sie den Ensotech™ Swave ESC und konforme Sensormotoren verwenden. Um vom Ensotec Kundenservice zu profitieren, empfehlen wir die Verwendung der unten aufgeführten Ensotech™ zertifizierten Sensormotoren: Marke Modell Stator RC-AURORA ARR BRUSHLESS 5500kv SLOTLESS RC-AURORA ARR BRUSHLESS 6200kv SLOTLESS RC-AURORA ARR BRUSHLESS 7000kv SLOTLESS LD POWER 1528 BRUSHLESS 5300KV SLOTLESS ENSOTECH Swave-ZM V3 3500KV + 4500KV SLOTLESS ENSOTECH Swave-ZM V3 5500KV SLOTLESS ENSOTECH Swave-ZM V3 6500KV SLOTLESS RACE UNLIMITED XMM002-3500SE SLOTLESS RACE UNLIMITED XMM002-5500SE SLOTLESS ENSOTECH SWAVE-ZM V2 3500KV SLOTLESS ENSOTECH SWAVE-ZM V2 5500KV SLOTLESS ENSOTECH SWAVE-ZM V2 6500KV SLOTLESS ENSOTECH SWAVE-ZM V2 7500KV SLOTLESS Bitte beachten Sie, dass die Verwendung von nicht-Ensotech™-zertifizierten Sensormotoren mit dem elektronischen Drehzahlregler (ESC) von Swave zum sofortigen Erlöschen der Ensotech™-Garantie führt (gilt nicht für sensorlose Motoren). Beachten Sie bitte auch den Hinweis zum Löten der Anschlusskabel! Swave-W2 Sensored Electronic Speed Controller makes technology essential to your modern mini R/C car. The principle of W2 to enhance heating dissipation. Used high watts thermal PAD, more copper inside PCB for current flow optimization, and the length of PCB increased 1mm compared to W.Besides, the schematic has also been re-engineered to improved control of Bluetooth power..... ready for future gadget tech. Ideally to use on microscale 1:28 RWD and shaft drive AWD touring car who needs liner and responsiveness on drifting and touring race. Enjoy the best value versus performance ratio, size, weight, technology as well as other advantages. Features "Blinky-mode" provides a fair racing environment between racers. (Shows that all timing advance switched to zero) Stunning size and weight Easy-to-use programming Firmware update available A professional set of customized parameters for the difficult race track Automatic recognition of Hall sensor’s position Settings configurations export and import. (You can save and load configuration or share out) Aluminum body Firmware update and change setting via Android version swave appsOptional UARTLINK-II programming cable Optional wireless EnsoBlueth Bluetooth adaptor Specification: * Dimensions (mm): 26.00(L)*13.20(W)*7.86(H) * Weight: 4.5g * Supply Voltage: 2s LiPo / 2s LiOn * Const./Brust Current (A): 20/30A (under 90 degree Celsius) * Sensor input: 1 (5 pins) * Programming input: 1 * Receive input: 1 * Support motor type (Sensored): Slotless 15mm Brushless DC up to 7500kv * Support motor type (Sensorless): Slotless 15mm Brushless DC * BEC Output: 5V / 1.5A PROPER GEARING ------------- >>> HERE Package Included:1* Swave-W2 ESC1* Receiver Cable (JST)1* Receiver Cable (JR)1* Motor Sensor Cable (product code: CABLE06) Hinweise zum Löten der Anschlusskabel: Die Anschlusskabel (Motor und Lipo) müssen selber am ESC angelötet werden. Beachten Sie dabei, dass Sie das ESC nicht überhitzen, die Elektronik könnte dabei Schaden nehmen. Defekte ESC aufgrund von Überhitzung beim Löten sind von der Garantie ausgenommen. Wir empfehlen Ihnen beim Löten der Anschlusskabel ein Flussmittel zu verwenden, und den Lötvorgang möglichst kurz zu halten. Lassen Sie das ESC beim Löten der einzelnen Kabel zwischendurch immer wieder abkühlen.

E_SWAVE-W2

89,00 CHF*

Details

ESC GSC V1.2 (GLA)

FOR GLA and GLA-V2

GLA-S020

49,00 CHF*

Details

Tipp

Furitek MOMENTUM 20A/40A brushless sensorless ESC for Race & Drift with Bluetooth (without Case)

Features:Support brushless DC and brushed DC motor (config via app, default is brushless) Designed for Micro Car 1/24, 1/27, 1/28 2WD or AWD or RWD 5.5V-1.5A Built-in BEC Mini size and light weight Super easy programming via App on Android and IOS Firmware update available (bluetooth module required) Real-time telemetry up to 10Hz 2s liPo battieres with automatic battery type recognition capability Professional parameter setup for many race tracks 3 running modes suitable for different types of RC carsSpecifications:Dimension (mm): 24(L)x12.4(W) Weight: about 2.1g Battery types: LIPO ONLY Motor type: Sensorless Brushless DC / Brushed DC BEC output: 5.5V/1.5A Constant Current : 20A Burst Current : 40A Waterproof: NO

FUK-2021

65,00 CHF*

Details

GL Racing brushless sensored ESC- GL-SD-ESC-010T

(For GTR, GLA, GLR ,GLF, GL-RIDER) Technical Specifications: Model: GL-SD-ESC-010T Continuous current: 15A Best Current (10sec): 30A Battery Input: 3,7 Volt / 2cells, 1.2V NiMh/NiCd / 6cells Bec output: 6 Volt / 1 A Weight (without wiring): 4.1g Dimension (L x W x H) mm: 25 x 15 x 8.5 mm Mini-Z Motor limit with 2cell x 3.7V Lipo, The motor Timing is at 0 degree: 10000KV or below Features: Ultra-smooth, precise trottle and braking control compatible with sensored/sensorless brushless motors Data analysis capability (RPM, low voltage and ESC temperature) Easily Programming throug the LED card (not included) Built-in one touch On/Off switch with LED Built-in Low voltage cut-off, Overheat protection and signal loss protection Included: Speed Control, Extended BEC wire, Sensor wireDownloads / Manuals (GL-SD-ESC-010T):ESC User GuidelineESC ProgrammierungESC Erklärungen

GL-SD-ESC-010T

69,00 CHF*

GLD-22 - ESC V1.2

GL-Drift-S-024

46,00 CHF*

Details

GLF-1 ESC V1.2

GLF-S-015

45,00 CHF*

GLR ESC GSC V1.2

Offizielles ESC für die Super Stock 2.5 Klasse.

GLR-S018

41,00 CHF* 46,00 CHF* (10.87% gespart)

Tipp

PN Racing Anima 20A Micro Sensored Brushless ESC

Technical /Specifications Continuous current: 20A Burst Current: (10sec): 40A Battery Input: 3.7V LiPo x 2 cells, 1.2V NiMh x 6 cells BEC Output: Linear 6V/1.5A Weight (not include wiring): 4.5g Dimension: 22.8mmx13.5mmx9.5mm Mini-Z Motor limit with 2cell x 3.7V LiPo. The motor timing is at 0 deg. 10000kv or below Features Ultra-smooth, Precise Throttle and Braking Control Compatible with Sensored / Sensorless Brushless Motors Data Analysis Capability (RPM, Low voltage and ESC temperature) Hot Wire PC Interface for Advanced Programming and Updating #TP-RADON-USB (Not include in the package) Easily Programming through the LED Programmer #500821 (Not include in the package) Built-in one-touch On/Off switch with LED Built-in Low voltage cut-off, Overheat protection and signal loss protection Package Inculed: 1 x Anima 20A ESC 1 x Motor Sensor Wire for #500822 PN Motor Anima35 Anima 55 Anima75 1 x Wire Connector ESC to Reciver #500823 1 x JST Femail plug for 2S Lipo BatteryInstruction Manual DownloadLED Program Card Info

PN-500820

79,00 CHF*

Motor - sensored

Ensotech Swave-ZM V3 4500KV Motor

Ensotech brings the ultimate technology to mini-scale slotless motors and is pleased to introduce their third version in a new matte blue finish Swave-ZM V3 sensored brushless motor for 1:28th scale R/C race. After a year of research and testing, using a new type of sensor component, a more efficient copper wiring, and magnet to produce Swave-ZM V3 motor under an improved production method. All these updates result in a lowered overall resistance and an improved current flow. In terms of figures, the Swave ZM-V3 motor has increased the overall performance by almost 20%. These versions of motors feel significantly punchier although retaining a smooth powerful acceleration. Specification: Motor Type: 3 Phases, Slotless, BrushlessPoles: 2PMotor Shaft Flat Spot: YESPower Cable: 3pcs x 100mm pre-soldered blue color cablesWeight: 21g include motor wire Package:1 x Ensotech Swave-ZM V3 4500KV motor

E_ZMV34500KV

55,00 CHF*

Ensotech Swave-ZM V3 5500KV Motor

E_ZMV35500KV

55,00 CHF*

Ensotech Swave-ZM V3 6500KV Motor

E_ZMV36500KV

55,00 CHF*

GL Sensored brushless motor 2500 kV (Super Stock 2.5)

Der offizielle Motor für die Super Stock 2.5 Klasse.

GMM-002-SD2500KV

49,00 CHF*

GL Sensored brushless motor 3500 kV

GMM-002-SD3500KV

49,00 CHF*

GL Sensored brushless motor 4500 kV

GMM-002-SD4500KV

49,00 CHF*

GL Sensored brushless motor 5500 kV

GMM-002-SD5500KV

49,00 CHF*

GL Sensored brushless motor 6000 kV

GMM-002-SD6000KV

49,00 CHF*

GL Sensored brushless motor 6800 kV

GMM-002-SD6800KV

49,00 CHF*

GL Sensored brushless motor 8800 kV

GMM-002-SD8800KV

49,00 CHF*

Hobbywing Ezrun 1626SD Motor 3500kV

Die erste Motorenserie von Hobbywing, die speziell für den Einsatz in 1/28er-Modellen entwickelt wurde. Die volle Kraft dieses Motors wird außerdem erst entfalten, wenn er zusammen mit dem Ezrun Mini28-Regler verwendet wird. Erst dann steht Timing Advance zur Verfügung, das die Spitzengeschwindigkeiten massiv erhöhen kann.Eigenschaften:Verbesserte SpitzengeschwindigkeitPräzises AnsprechverhaltenHohe Effizienz bei geringer TemperaturEntwickelt für die Anforderungen von HochleistungsfahrernEinfach zerlegbar für WartungsarbeitenTechnische Daten:Typ:Brushless, SensoredDrehzahl:3500kVLeerlaufstrom:0,4AZellenzahl LiPo:2SAnzahl Pole:2Durchmesser:16mmLänge:26mmWellenlänge:-Wellendurchmesser:2mmGewicht:18gEinsatz:1/28 MiniLieferumfang:1x Motor1x Bedienungsanleitung (Englisch)

HW30402653

69,00 CHF*

Hobbywing Ezrun 1626SD Motor 5000kV

Die erste Motorenserie von Hobbywing, die speziell für den Einsatz in 1/28er-Modellen entwickelt wurde. Die volle Kraft dieses Motors wird außerdem erst entfalten, wenn er zusammen mit dem Ezrun Mini28-Regler verwendet wird. Erst dann steht Timing Advance zur Verfügung, das die Spitzengeschwindigkeiten massiv erhöhen kann.Eigenschaften:Verbesserte SpitzengeschwindigkeitPräzises AnsprechverhaltenHohe Effizienz bei geringer TemperaturEntwickelt für die Anforderungen von HochleistungsfahrernEinfach zerlegbar für WartungsarbeitenTechnische Daten:Typ:Brushless, SensoredDrehzahl:5000kVLeerlaufstrom:0,5AZellenzahl LiPo:2SAnzahl Pole:2Durchmesser:16mmLänge:26mmWellenlänge:-Wellendurchmesser:2mmGewicht:18gEinsatz:1/28 MiniLieferumfang:1x Motor1x Bedienungsanleitung (Englisch)

HW30402654

69,00 CHF*

Hobbywing Ezrun 1626SD Motor 6500kV

Die erste Motorenserie von Hobbywing, die speziell für den Einsatz in 1/28er-Modellen entwickelt wurde. Die volle Kraft dieses Motors wird außerdem erst entfalten, wenn er zusammen mit dem Ezrun Mini28-Regler verwendet wird. Erst dann steht Timing Advance zur Verfügung, das die Spitzengeschwindigkeiten massiv erhöhen kann.Eigenschaften:Verbesserte SpitzengeschwindigkeitPräzises AnsprechverhaltenHohe Effizienz bei geringer TemperaturEntwickelt für die Anforderungen von HochleistungsfahrernEinfach zerlegbar für WartungsarbeitenTechnische Daten:Typ:Brushless, SensoredDrehzahl:6500kVLeerlaufstrom:0,6AZellenzahl LiPo:2SAnzahl Pole:2Durchmesser:16mmLänge:26mmWellenlänge:-Wellendurchmesser:2mmGewicht:18gEinsatz:1/28 MiniLieferumfang:1x Motor1x Bedienungsanleitung (Englisch)

HW30402655

69,00 CHF*

PN Racing Anima 2500kv Sensored Brushless Motor

sensored Brushless Motor2500 kv

PN-170025

49,00 CHF*

PN Racing Anima 3500kv Sensored Brushless Motor

sensored Brushless Motor3500 kv

PN-170035

49,00 CHF*

PN Racing Anima 5500kv Sensored Brushless Motor

sensored Brushless Motor5500 kv

PN-170055

49,00 CHF*

PN Racing Anima 7500kv Sensored Brushless Motor

sensored Brushless Motor7500 kv

PN-170075

49,00 CHF*

Motor - sensorless

Furitek Greyhound 3500kV sensorless brushless Motor

2 Pole strong magnetic rotor hi-torque motor design.High purity and higher temperature copper windings, lower copper losses, maximises efficiency.Super thin (0.2 mm) stator lamination - lower eddy losses - maximises efficiency.Japanese NMB --- High RPM ABEC5 bearings.Precision balanced rotor, smoothness for best reliability and maximum 60,000 RPM.CNC machined 6061 T6 aluminium heat sink vein can design--- good heat dissipating.Precision engineered for maximum energy conversion.Special designed end cap with side locking screws that firmly secures the end cap and PCB. ☆☆☆ Sensorless motor can be easily upgraded to sensored motor with optional parts in the future, no longer need to change the entire motor. Suit for 1/24 1/28 1/32 RC MINI-Z mini car

FUR-2086

32,00 CHF* 40,00 CHF* (20% gespart)

Furitek Greyhound 5500kV sensorless brushless Motor

FUR-2087

32,00 CHF* 40,00 CHF* (20% gespart)

Furitek Hellfire 5500kv Sensored brushless motor - Gold color

Sensored brushless motorKV (RPM/Volt)5500Strom im Leerlauf0.4 ASpannung2-3SInnenwiderstand0.42 OhmMax. Strom9.5 ASlot / Pole2PGrösseDurchmesser 15mmLänge 25mmSchaftDurchmesser 2mmLänge 10mmGewicht16.8g

FUR-2194

36,00 CHF* 55,00 CHF* (34.55% gespart)

Furitek Hellfire 7500kv Sensored brushless motor - Gold color

Sensored brushless motorKV (RPM/Volt)7500Strom im Leerlauf0.7 ASpannung1-2SInnenwiderstand0.18 OhmMax. Strom11 ASlot / Pole2PGrösseDurchmesser 15mmLänge 25mmSchaftDurchmesser 2mmLänge 10mmGewicht16.8g

FUR-2191

36,00 CHF* 55,00 CHF* (34.55% gespart)

GL HT Brushless Motor (3500KV)Brushless motor for 1/28 scale

- linear power control.- High efficiency of energy conversion.- Better torque than Kyosho VE motor series.- JAPAN high quality duel ball Bearing included.- no power fade at higher temperatures.- 15mm diameter.

GMM-001-3500

49,00 CHF*

GL HT Brushless Motor (5250KV)Brushless motor for 1/28 scale

Motor developed with GLA in mind, enough power for experienced usersMore power - a little more powerful than PN5500, but less than PN7500Easier to control - with a more linear power band making your car easier to control.Longer run time - it also boast higher electrical efficiency than motors of the same classPowerful til the end - Power level stays more consistent towards the end of each run, but this does mean that motor feels hotter at the end of run, because it stayed at high power levels until the very end.Taller gear ratios - recommended GLA gear ratio from 5.4 to 6.1 depending on your driving style and track layoutTIP: Wiring is reverse to PN, so if you are swapping out a PN, swap any 2 of the 3 motor wires

GMM-001-5250

49,00 CHF*

Tipp

Marka Racing V2 Brushless Motor 3500KV

The Marka Racing Brushless Motor 3500kv have much-more torque and acceleration than others VE motor. The Marka Motor heatsink can is annodized with black color and the Alu end-bell is annodized in red color. In this way we tryed to keep Marka brand colors and offer a nice design. SpecificationsScale: 1/28th BrushlessSensorlessRPM: 30000 with 8.4VKV Rating: 3467Kv LiPo/Nimh Cells: 2S or 4xNimh 1.2V (4.8V) No-load Current: 0.2A Timing: Fix Weight: 17.3grAluminium Heatsink Canhas the 15mm diameter same as normal brushed 130 motor.has holes in the front and lateral sides for a good ventilation that allows for a better heat dispersionin the front there are M2 screws holes that allows to fit the motor on all the types of Miniz motor mount and chassis has printed Marka logo on the lateral side and the Kv number to recognize the motor type Stator high quality wires used for high temperature and longevity life high quality wires producing good torque and speed Rotor The rotor has the following size 6.0x14.5mm is the standard one. The rotor is interchangeable and is possible change with other size 6x(11.5mm-12.5mm-13.5mm-15.5mm-16.5mm). The shaft is 2mm. Bearing JAPAN high quality duel ball Bearing included Compatible Fits in all Kyosho, PN Racing, GL Racing, Atomic, Xpower motor mount. Fits in all Mini-Z chassis MR02, MR03, F1, AWD, GLR, GLA, GLF, BZ ect. Wire ConnetionFor connect to the ESC use 22AWG/0.35mm silicon wire Screws To mount the motor on the motor mount, use the following screws: On PN Racing motor mount use M2x4mm countersunk screws for aluminum/metal On GL Racing (GLR, GLA e GLF) or Atomic (BZ) motor mount use M2x4mm button screws for aluminum/metal The screws are not included.

MZR-3500-V2

39,00 CHF*

Tipp

Marka Racing V2 Brushless Motor 5500KV

The Marka Racing Brushless Motor 5500kv have much-more torque and acceleration than others VE motor. The Marka Motor heatsink can is annodized with black color and the Alu end-bell is annodized in red color. In this way we tryed to keep Marka brand colors and offer a nice design. SpecificationsScale: 1/28th BrushlessSensorlessRPM: 47000 with 8.4VKV Rating: 5467 Kv LiPo/Nimh Cells: 2S or 4xNimh 1.2V (4.8V) No-load Current: 0.4A Timing: Fix Weight: 17.4grAluminium Heatsink Canhas the 15mm diameter same as normal brushed 130 motor.has holes in the front and lateral sides for a good ventilation that allows for a better heat dispersionin the front there are M2 screws holes that allows to fit the motor on all the types of Miniz motor mount and chassis has printed Marka logo on the lateral side and the Kv number to recognize the motor type Stator high quality wires used for high temperature and longevity life high quality wires producing good torque and speed Rotor The rotor has the following size 6.0x14.5mm is the standard one. The rotor is interchangeable and is possible change with other size 6x(11.5mm-12.5mm-13.5mm-15.5mm-16.5mm). The shaft is 2mm. Bearing JAPAN high quality duel ball Bearing included Compatible Fits in all Kyosho, PN Racing, GL Racing, Atomic, Xpower motor mount. Fits in all Mini-Z chassis MR02, MR03, F1, AWD, GLR, GLA, GLF, BZ ect. Wire ConnetionFor connect to the ESC use 22AWG/0.35mm silicon wire Screws To mount the motor on the motor mount, use the following screws: On PN Racing motor mount use M2x4mm countersunk screws for aluminum/metal On GL Racing (GLR, GLA e GLF) or Atomic (BZ) motor mount use M2x4mm button screws for aluminum/metal The screws are not included.

MZR-5500-V2

39,00 CHF*

Marka Racing V2 Brushless Motor 7500KV

The Marka Racing Brushless Motor 7500kv have much-more torque and acceleration than others VE motor. The Marka Motor heatsink can is annodized with black color and the Alu end-bell is annodized in red color. In this way we tryed to keep Marka brand colors and offer a nice design. SpecificationsScale: 1/28th BrushlessSensorlessRPM: 63000 with 8.4VKV Rating: 7430 Kv LiPo/Nimh Cells: 2S or 4xNimh 1.2V (4.8V) No-load Current: 0.4A Timing: Fix Weight: 17.7grAluminium Heatsink Canhas the 15mm diameter same as normal brushed 130 motor.has holes in the front and lateral sides for a good ventilation that allows for a better heat dispersionin the front there are M2 screws holes that allows to fit the motor on all the types of Miniz motor mount and chassis has printed Marka logo on the lateral side and the Kv number to recognize the motor type Stator high quality wires used for high temperature and longevity life high quality wires producing good torque and speed Rotor The rotor has the following size 6.0x14.5mm is the standard one. The rotor is interchangeable and is possible change with other size 6x(11.5mm-12.5mm-13.5mm-15.5mm-16.5mm). The shaft is 2mm. Bearing JAPAN high quality duel ball Bearing included Compatible Fits in all Kyosho, PN Racing, GL Racing, Atomic, Xpower motor mount. Fits in all Mini-Z chassis MR02, MR03, F1, AWD, GLR, GLA, GLF, BZ ect. Wire ConnetionFor connect to the ESC use 22AWG/0.35mm silicon wire Screws To mount the motor on the motor mount, use the following screws: On PN Racing motor mount use M2x4mm countersunk screws for aluminum/metal On GL Racing (GLR, GLA e GLF) or Atomic (BZ) motor mount use M2x4mm button screws for aluminum/metal The screws are not included.

MZR-7500-V2

39,00 CHF*

PN RACING MINI-Z V3.1 BRUSHLESS MOTOR 3500KV

NEW V3.1 Version Motor Can the all new motor can has bigger and more ventilation holes allowing better heat dispersion thus providing better run time front section has evenly spaced mounting screws holes that is compatible and fits for all after market motor holder and chassis End Cap newly designed end cap now comes with side locking screws that firmly secures the end cap and PCB. Stator high temp wires used for longevity proprietary wiring producing better speed, torque and smoothness Features Changeable armature New design air vent get more cooling High-Temperature wire 15mm diameter motor can, same as normal brushed 130 motors. Fits in all Kyosho, PN, and aftermarket motor mounts. Fits in all Mini-Z chassis AWD, F1, MR02 and MR03. Much more torque and acceleration than others VE motor. No loading RPM 22000 on 4.8V, amp draw only 0.28A Four mounting holes to allow different angles of motor terminals. Eight venting holes prevent heat buildup. Can and endbell ball bearing from Japan. Recommend gear ratio 3.95 to 5.00 Connection: M1 to Orange Wire M2 to Yellow Wire M3 to Blue Wire

PN-160035

45,00 CHF*

PN RACING MINI-Z V3.1 BRUSHLESS MOTOR 5500KV

NEW V3.1 Version Motor Can the all new motor can has bigger and more ventilation holes allowing better heat dispersion thus providing better run timefront section has evenly spaced mounting screws holes that is compatible and fits for all after market motor holder and chassis End Cap newly designed end cap now comes with side locking screws that firmly secures the end cap and PCB. Stator high temp wires used for longevityproprietary wiring producing better speed, torque and smoothness Features Changeable armatureNew design air vent get more coolingHigh-Temperature wire15mm diameter motor can, same as normal brushed 130 motors. Fits in all Kyosho, PN, and aftermarket motor mounts.Fits in all Mini-Z chassis AWD, F1, MR02 and MR03.Much more torque and acceleration than others VE motor.No loading RPM 22000 on 4.8V, amp draw only 0.28AFour mounting holes to allow different angles of motor terminals.Eight venting holes prevent heat buildup.Can and endbell ball bearing from Japan.Recommend gear ratio 3.95 to 5.00 Connection:M1 to Orange WireM2 to Yellow WireM3 to Blue Wire

PN-160055

45,00 CHF*

Servo

GL Titanium Gear Servo for GLR/GLA/GLF-1 & GL-Rider

Produktinformationen "GL Titanium Gear Servo for GLR/GLA/GLF-1 & GL-Rider" [GL-0820-TG] GL Titanium Gear Servo for GLR/GLA/GLF-1 & GL-Rider Details: For GLR-GLA-V2.1,GLF-1 & GL-Rider Features: Full alloy casing Titanium gears Bearing Speed 0.05sec/60 @6.0V Torque:1.50kg cm @6.0V Weight 7g

GL-0820-TG

62,00 CHF*

Semi-Alloy Case Hi Speed Servo (Metal Gear) - FOR GLR , GLA, GL-RIDER

For GLA-V2, GLR, GLR-GT, GL-Drift-2022, GLF-1, GL-RIDERArtikelbezeichnung: GL003-DMG Alternative Artikelnummern: GL-Drift-S-025, GL-GT-S-035, GLF-S-016 Features: Alloy Top and Bottom Casing Full Metal gears Dual Bearing Speed: 0.06sec/ 60° @ 6.0V Torque: 1.10 kg . cm @ 6.0V Weight: 5g

GL003-DMG

30,00 CHF*

Mikro Receiver

GT55 Kyosho KT-432 AFHDS NANO 4CH Receiver (no Case)

Dieser Nano Receiver ist mit FlySky AFHDS kompatibel.Variante ohne Gehäuse4 KanäleleichtGrösse: 19 x 12 mmPassende Fernsteuerung:Kyosho KT-432

GT55-GT-160-noCase

35,00 CHF*

MICRO 2.4GHZ FHSS 4 CHANNEL RECEIVER NANO (KO PROPO COMPATIBLE)

This RC receiver unit is Kyosho & Ko Propo ASF compatible. It offers full 4-channel support in ultra- light weight and micro size. It is ideal for micro racing cars. Channels: 4CH Weight: 3.5g Dimension: 19×12mm Compatibility Compatible with ASF remote control system. Suitable for remote control KO PROPO EX-1 FHSS KO PROPO EX-2 KO PROPO EX-6R KO PROPO 903FH/904FH RF Module Bind - Press the BIND button and power on the receiver, the receiver’s led will flash quickly. - Put the transmitter into bind mode. - The receiver’s led will flash slowly when the binding is successful. - Disconnect receiver’s power and reconnect the power cable to the receiver. - Now is should working normally.

KEY-10486-1

45,00 CHF*

Micro 2.4Ghz FHSS-4 4 Channel receiver Sanwa

Based on the RX471 Built specially with micro cars in mind, ultra light weight for low cg with micro JST sockets. Specifications: Nominal Input Voltage: 4.8-7.4V Weight: 0.065oz (1.9g) Dimensions: (21.5x15.0x7.5mm) Frequency: 2.4GHz FH3/FH4 Selectable Via Transmitter Fail-Safe Support: Yes (All Channels) Battery Voltage Fail-Safe Limit: 3.5-5.0V (FH3) / 3.5-7.4V (FH4) Dimension: Length: 21.5mm Width: 15.0mm Height: 8.7mm (Plugs included)

GX-033

49,00 CHF*

MICRO 2.4GHZ Ko Propo / Kyoshos ASF 4CH Nano Receiver Antenna-Free

This RC receiver unit is Kyosho & Ko Propo ASF compatible. It offers full 4-channel support in ultra- light weight and micro size. It is ideal for micro racing cars. Channels: 4CH Weight: 3.5g Dimension: 22×12mm Compatibility Compatible with ASF remote control system. Suitable for remote control KO PROPO EX-1 FHSS KO PROPO EX-2 KO PROPO EX-6R KO PROPO 903FH/904FH RF Module Bind - Press the BIND button and power on the receiver, the receiver’s led will flash quickly. - Put the transmitter into bind mode. - The receiver’s led will flash slowly when the binding is successful. - Disconnect receiver’s power and reconnect the power cable to the receiver. - Now is should working normally.

KEY-10486-C

45,00 CHF*

Lipo - Laden

3 x Parallel charging cable (JST-PH)

3x JST-PH Parallel charging cable For GLA and Atomic AMZ/BZ Lipo batteries or any other 2S Lipo with a JST-PH connector. This handy charge cable allows you to connect 4mm banana plugs to chargers, and the charger's balance board. On the battery side, we have provided 3x JST-PH connectors so that you can charge/discharge up to 3 packs at a time. You do not have to use all 3 of course, using it to charge 1 pack is perfectly fine, but if you would like charge/discharge up to 3 packs together, this cable can do it. For those new to parallel charging, you can google/you tube information on it, but in summary: You can only connect 2S Lipo to this cable Mixing 300mAh, 330mAh, 360mAh together is ok The packs should be reasonably similar in voltage, for example, 2 packs 90% full, 1 pack empty, is NOT such a good idea, as it will cause a lot of current(Amps) going from the full packs to the empty pack, charging the empty pack at very high current(AMps), this might even melt the cable if the Packs are large/high C enough. All empty is fine, ~30%, ~40%, ~50% mix together is fine. Ideally charger capacity set to total mAh of the packs Charger current can scale up according to total capacity of the packs Below is a good video guide: https://www.youtube.com/watch?v=WY194Md6KNg

PT0004

8,00 CHF*

3x GL connector Parallel Charging Cable

Produktinformationen "3x GL connector Parallel Charging Cable" [PT0006] 3x GL connector Parallel Charging Cable Details: 3x JST-PH Parallel charging cable For GLA and Atomic AMZ/BZ Lipo batteries or any other 2S Lipo with a JST-PH connector. This handy charge cable allows you to connect 4mm banana plugs to chargers, and the charger's balance board. On the battery side, we have provided 3x JST-PH connectors so that you can charge/discharge up to 3 packs at a time. You do not have to use all 3 of course, using it to charge 1 pack is perfectly fine, but if you would like charge/discharge up to 3 packs together, this cable can do it. For those new to parallel charging, you can google/you tube information on it, but in summary: You can only connect 2S Lipo to this cable Mixing 300mAh, 330mAh, 360mAh together is ok The packs should be reasonably similar in voltage, for example, 2 packs 90% full, 1 pack empty, is NOT such a good idea, as it will cause a lot of current(Amps) going from the full packs to the empty pack, charging the empty pack at very high current(AMps), this might even melt the cable if the Packs are large/high C enough. All empty is fine, ~30%, ~40%, ~50% mix together is fine. Ideally charger capacity set to total mAh of the packs Charger current can scale up according to total capacity of the packs

PT0006

20,00 CHF*

Lipo Pack / 7.4V / 2S / GL Racing / 360mAh / 45C Discharge

High Voltage 2S battery for R/C Competition usage. Size fit for GL-RIDER, GLA ,GLR, GLF-1, GLR-GT, GTR, RX28, RTA, MWX R.1, Nexx Specter

GBY003

16,90 CHF*

Lipo Pack / 7.4V / 2S / GL Racing / 360mAh / 45C Discharge with GL connector

High Voltage 2S battery for R/C Competition usage. Size fit for GL-RIDER, GLA ,GLR, GLF-1, GLR-GT, GTR, RX28, RTA, MWX R.1, Nexx SpecterWird direkt mit dem GL Anschluss-Stecker geliefert!

GBY003-GL

19,50 CHF*

Marka Racing Lipo 2S 7.4V 350mAh 50C

Marka batteries are of high quality and have been developed using the most modern technologies available. They are "Top level" batteries for use in the world of racing at professional levels.These batteries have a high voltage level under load, with a low internal resistance.Designed for use with 1/28 scale car (GLA-GLR-GLF-BZ) Specification Voltage: 7.4V (2S) Capacity: 350mAh C-rate: 50C Cable: 22Awg Plug: JST-PH Type: Rectangular Size: 44 x 20 x 11.5mm (Length x Width x Height) Weight: 18.5g

MRK-LI350

15,00 CHF*

Marka Racing Lipo Safety Bag

Marka Racing safety lipo bag for charging and storage LiPo batteries. Made from fire-proof and fire-resistant material.The bag is in black color and carries the Marka logo.You can store two standard size batteries.

MRK-5048

12,00 CHF*