RECEIVING UNIT MINI-Z EVO FLYSKY NOBLE

Dieser Artikel steht derzeit nicht zur Verfügung!
CHF 45,00 *

inkl. MwSt. zzgl. Versandkosten

Aktuell nicht verfügbar, bei Interesse bitte Mail an info@one28.ch

  • FS-RM005
FS-RM005 is a module used with Flysky Noble NB4. It adopts Mini-Z FHSS system and can be adapted... mehr
Produktinformationen "RECEIVING UNIT MINI-Z EVO FLYSKY NOBLE"

FS-RM005 is a module used with Flysky Noble NB4.
It adopts Mini-Z FHSS system and can be adapted to Kyosho Mini-Z RWD, AWD, 4X4, FWD and Buggy.

Product Model: FS-RM005

Built for: Flysky Noble NB4

Wireless Frequency: 2.4GHz

Transmission power: <20 dBm (EU)

Wireless Protocol: Mini-Z(FHSS)

Power: 3.3±0.1V

Antenna type: Built-in single antenna

Temperature range: -10 ? — + 60 ?

Humidity range: 20% -95%

Online Update: Yes

Dimensions: 34*18*5.2mm ( without the protective cover)

Weight: 2.3g

Certification: CE,MIC,FCC ID:N4ZRM005

Notice: Before using the FS-RM005, the Noble NB4 should be uploaded to the FW 2.0.99 (check the changelog carefully before updating)


Installation
1. Remove the base of the NB4 correctly install the module into the transmitter handle, click [Model ], select the radio frequency setup as Mini-Z (FHSS);
2. Power on the receiver while pressing the receiver’s bind button, and the receiver’s LED light flashes quickly;
3. Click [Rx SET] and select the Bind Set. After the receiver flashes slowly, the transmitter will exit the code matching state, and the receiver indicator will always be on to indicate successful code matching;
4. Check whether the transmitter, receiver, and model work normally. If you need to bind again, please repeat steps 2-3.

Compatibility
The FS-RM005 module is compatible with NB4, etc.
The FS-RM005 module is compatible with Kyosho FHSS Mini-Z RWD AWD 4X4 FWD and Buggy. etc.

Weiterführende Links zu "RECEIVING UNIT MINI-Z EVO FLYSKY NOBLE"
Verfügbare Downloads:
Zuletzt angesehen