Filter schließen
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
von bis
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 von 3
Für die Filterung wurden keine Ergebnisse gefunden!
3 x Parallel charging cable (JST-PH) 3 x Parallel charging cable (JST-PH)
3x JST-PH Parallel charging cable For GLA and Atomic AMZ/BZ Lipo batteries or any other 2S Lipo with a JST-PH connector. This handy charge cable allows you to connect 4mm banana plugs to chargers, and the charger's balance board. On the...
CHF 7,00 *
2.4GHz ASF-H Rx UnitDesigned for Mini-Z ASF 2.4Ghz (901/902SM)Support Ultra response mode of KO EX 2.4GHz ASF-H Rx UnitDesigned for Mini-Z ASF...
CHF 28,70 *
GL HT Brushless Motor (3500KV)Brushless motor for 1/28 scale GL HT Brushless Motor (3500KV)Brushless motor...
- linear power control. - High efficiency of energy conversion. - Better torque than Kyosho VE motor series. - JAPAN high quality duel ball Bearing included. - no power fade at higher temperatures. - 15mm diameter.
CHF 43,00 *
GL HT Brushless Motor (5250KV)Brushless motor for 1/28 scale GL HT Brushless Motor (5250KV)Brushless motor...
Motor developed with GLA in mind, enough power for experienced users More power - a little more powerful than PN5500, but less than PN7500 Easier to control - with a more linear power band making your car easier to control. Longer run...
CHF 43,00 *
Nano IR Transponder Unit (Support Robitronic/Easy lap) Nano IR Transponder Unit (Support...
Transponder ID Support Robitronic Transponder. New compact size 7.8 x 8.8 x 5.1mm Durable silicone wire with micro JST plug compatible on Mini-Z / GLA.
CHF 23,90 *
Carbonite spare servo gear set (DES131) Carbonite spare servo gear set (DES131)
Spare gear set for Graupner DES131 servo . They don't break that easily, but it can happen, if your DES131 is broken, open it and check if one of the gears is broken, if so, this is what you need to fix it. For GLA and GLA-V2
CHF 6,50 *
Receiver 1.5mm JST Conversion Kit Receiver 1.5mm JST Conversion Kit
Contains: 3 JST sockets (1 spare), 10cm heat shrink tubing (enough for 2 attempts). WARNING: For people with good soldering skills ONLY!!! WARNING: Convert your Receiver at your our risk, Receiver warranty void For people looking for a...
CHF 2,00 *
GL HT Brushless Motor (8600)Brushless motor for 1/28 scale GL HT Brushless Motor (8600)Brushless motor for...
GL High-Torque Brushless Motor (8600KV) Motor developed with NiMH Mini-Zs as well as GLA in mind, very high power for expert users More power - one of the most powerful motors out there, due to its High Torque, KV rating is not high, but...
CHF 43,00 *
GL HT Brushless Motor (6800KV) GL HT Brushless Motor (6800KV)
5250KV too gentle? 8600KV too powerful? Here's the in between 6800KV, as with previous motors in the GL range: - high efficiency - linear power control - no power fade at higher temperatures - 15mm diameter New feature for this motor: -...
CHF 48,00 *
Receiver 1.5mm JST Adapters (1pcs) Receiver 1.5mm JST Adapters (1pcs)
Adapters to convert regular Receiver servo sockets to 1.5mm JST sockets, suitable for GLA, GLR, AMZ, BZ, SZ.
CHF 2,00 *
Micro 2.4GHz FHSS-4 4 Channel receiver [Compatible w/Sanwa] Micro 2.4GHz FHSS-4 4 Channel receiver...
Based on the RX471 Built specially with micro cars in mind, ultra light weight for low cg with micro JST sockets. Specifications: Nominal Input Voltage: 4.8-7.4V Weight: 0.065oz (1.9g) Dimensions: (21.5x15.0x7.5mm) Frequency: 2.4GHz...
CHF 33,30 *
Sensored ESC cable Sensored ESC cable
Long=65mm For GL-ESC-COMBO-SD3500KV &GL-ESC-COMBO-SD5250KV
CHF 5,00 *
Sensored brushless motor 5500KV(1pc)Brushless motor for 1/28 scale Sensored brushless motor 5500KV(1pc)Brushless...
CHF 43,00 *
Brushless sensored ESC Brushless sensored ESC
(For GLA,GLR,GLF,GL-RIDER) GL-SD-ESC-010 User Guideline
CHF 59,00 *
New ESC program card [ Compatible with GL-SD-ESC-010 only ] New ESC program card [ Compatible with...
GL-SD-ESC-010 Function Description GL-SD-ESC-010 Setup value
CHF 16,90 *
GLR Servo Saver w/ Ride Height Bushing GLR Servo Saver w/ Ride Height Bushing
CHF 8,00 *
GLR ESC GSC V1.2 GLR ESC GSC V1.2
CHF 45,00 *
GLR Alum. Servo Mount GLR Alum. Servo Mount
GLR Alloy Servo Mount CNC with precision. Stiffer Servo and Steering Crank support for a sharper Steering response
CHF 21,00 *
Semi-Alloy Case Hi Speed Servo (Metal Gear) - FOR GLR , GLA, GL-RIDER Semi-Alloy Case Hi Speed Servo (Metal Gear) -...
For GLA-V2, GLR, GLR-GT, GL-Drift-2022, GLF-1, GL-RIDER Artikelbezeichnung: GL003-DMG Alternative Artikelnummern: GL-Drift-S-025, GL-GT-S-035, GLF-S-016 Features: Alloy Top and Bottom Casing Full Metal gears Dual Bearing Speed: 0.06sec/...
CHF 30,00 *
GL Titanium Gear Servo for GLR/GLA/GLF-1 & GL-Rider GL Titanium Gear Servo for GLR/GLA/GLF-1 &...
Produktinformationen "GL Titanium Gear Servo for GLR/GLA/GLF-1 & GL-Rider" [GL-0820-TG] GL Titanium Gear Servo for GLR/GLA/GLF-1 & GL-Rider Details: For GLR-GLA-V2.1,GLF-1 & GL-Rider Features: Full alloy casing Titanium gears Bearing...
CHF 62,00 *
1 von 3
Zuletzt angesehen