These knuckles add 1 ° of camber to the RTA. Originally, the chassis already has 2 ° of camber, these knuckles will allow you to have a total camber equal to -3 °.
New version of the RTA knuckles with many advantages:
The shape of the knuckle allows for better suspension movement.
The balls are slightly larger in order to limit the play in arms.
The balls are much more resistant.
These knuckles add 2 ° of camber to the RTA. Originally, the chassis already has 2 ° of camber, these knuckles will allow you to have a total camber equal to -4 °.
New version of the RTA knuckles with many advantages:
The shape of the knuckle allows for better suspension movement.
The balls are slightly larger in order to limit the play in arms.
The balls are much more resistant.
These knuckles add 3 ° of camber to the RTA. Originally, the chassis already has 2 ° of camber, these knuckles will allow you to have a total camber equal to -5 °.
New version of the RTA knuckles with many advantages:
The shape of the knuckle allows for better suspension movement.
The balls are slightly larger in order to limit the play in arms.
The balls are much more resistant.
This shims kit allows you to very quickly adjust the front ride height of the RTA without changing the springs compression or wheels angles.
This kit is composed of 3 shims of different thicknesses:
1 point shim: 0.6mm
2 points shim: 1mm
3 points shim: 1.5mm
This friction plate allows you to use lexan body post to fix lexan bodies but also hard bodies on the RTA.
Holes for body posts are spaced as far as possible in order to increase the stability of the body on the chassis.
This option is only available in the 98mm version.
New version of the lexan friction plate. Its new shape allows easier access to the ESC to turn it on. Moreover, the carbon is now chamfered to limit friction with the friction discs.For RTA V1.2 98mm version.
Dual spring shock absorber allowing to adjust the compression and the rear droop of your mini-z.
Highly recommended to improve the performance of your RTA.
This kit allows you to adjust the roll of the RTA.
With 3 different bar hardnesses, you will be able to allow
more or less roll to the chassis.Once installed, the anti-roll system is easy to
enable/disable with a single screw.
The following parts are required to use this option:RT001 V1.2RT003 V1.2RT004 V1.2
Optional aluminum chassis for RTA.
Possibility to add brass inserts (RT090) to adjust the weight distribution.
The chassis weighs 40gr and each brass weight weighs 2.6gr. So you can reach a total weight of 50.4gr.
The original chassis weighs 19gr. So, this option helps to add a maximum of weight to the lowest in order to lower the center of gravity of the chassis.
The addition / removal of the brass inserts is very quickly using only 2 screws.
The chassis is delivered without brass inserts.
This set allows to use the rear suspension of the RTA V1.2
This set is adaptable on RTA V1 and RTA V1.2
This new rear suspension increases the grip and the stability of the rear axle. It provides a very free and easy to adjust rear axle.
The addition of a rear pivot with a friction damper provides exceptional rear traction without degrading the reactivity of the front axle.
This set also allows to adapt the new battery stop (RT015 V1.2)
Brass inserts to ballast the aluminum (RT080) and brass (RT084) option chassis of the RTA.
Each insert weighs 2.6gr and is screwed using 2 micro screws.
This option helps to cover a wider range of mass distribution on the chassis as well as to lower the center of gravity as much as possible.
Set of 2pcs.
This set of
4 anodized aluminum setup wheels allows you to fine-tune your 2WD Mini-Z (RTA,
GLR, GT, MRZ, MR03…)
Machined
with very low tolerances, these setup wheels will allow you to measure and
adjust the following parameters:
The weight
on each wheel of your Mini-z (cross weight)The camber
of your wheels using a camber squareThe droop
of your Mini-zDo a visual
wheel weight adjustment if you don’t have precision scales.
This set of
4 anodized aluminum setup wheels allows you to fine-tune your 4WD Mini-Z (GLA, BZ, BZ3, SZ, FFZ,...)
Machined
with very low tolerances, these setup wheels will allow you to measure and
adjust the following parameters:
The weight
on each wheel of your Mini-z (cross weight)The camber
of your wheels using a camber squareThe droop
of your Mini-zDo a visual
wheel weight adjustment if you don’t have precision scales.
Mit diesem Unterlegscheiben-Kit können Sie sehr schnell die hintere Fahrhöhe des RTA einstellenDieser Satz besteht aus 4 Unterlegscheiben unterschiedlicher Dicke:1 Punkt-Unterlegscheibe: 0.4mm2-Punkt-Unterlegscheibe: 0,6mm
3 Punkte Unterlegscheibe: 0.8mm
4 Punkte Ausgleichsscheibe: 1mm Lieferung mit 4X M2 * 5 Schrauben
Die Version 2 der beliebten Front Achsen mit Innengewinde. Jetzt aus Titanium für mehr Haltbarkeit. Die V2 Achsen ermöglichen es, den vorderen Offset um 1mm Spurweite in Schritten von 0,5 mm durch die mitgelieferten M3x0,5 mm Axle Shims anzupassen. Die Achsen mit umgekehrtem Gewinde sind kompatibel mit dem Reflex Racing RX28 und auch GL Racing oder RTRC Fahrzeugen. Durch die Umkehrung des Gewindes und die Verwendung einer Schraube anstelle einer Mutter, ist es weniger wahrscheinlich, dass sich die Frontpartie Ihres Fahrzeugs in den RCP-Schienen verfängt, wenn Sie Räder mit geringerem Offset fahren. Das Kit wird mit 2 Achsen, 4 Stück M3x0,5 Kupferscheiben und 2 Stück M2x4mm Kopfschrauben geliefert. Tipp! Abhängig vom verwendeten Radtyp kann es vorkommen, dass die Achsen ein wenig axiales Spiel haben (minimal). Sie können dies durch leichtes Abschleifen der äußeren Achse beheben, um sie etwas schmaler zu machen. *****************************This is the V2 of our reverse axles. Now made from Titamium for more durability. The V2 axles allow you to adjust your front offset 1mm of trackwidth in increments of 0.5mm though the included M3x0.5mm Axle Shims. Reverse thread axles compatible with your Reflex Racing RX28 and GL/Atomic cars. By reversing the thread and using a screw instead of a nut, the front end of your car is less likely to snag into the RCP rails when running lower offset wheels. The kit comes with 2 Axles, 4pcs of M3x0.5 Copper Shims and 2pcs of M2x4mm button head screws. Tip: Depending on the type of wheel you use, sometimes, the axles can have a little bit of axial side to side play (minimal). You can tighten this up by lightly sanding the outer axle to make is slightly narrower.
High Quality Double Shield Ceramic Bearing Set for your 1/28th scale car with 3mm front axles.These bearings have very low axial play and spin super free.