Transponder ID für Robitronic Rundenzeitmesssysteme Grösse: 12 x 16 x 5 mmGewicht: 3gBetriebsspannung: 4.2 - 6 VoltStromverbrauch: 50mA max.Silikonkabel mit JST Stecker passend für Mini-Z und Micro/Nano RX (GL Racing, RTRC, PN Racing,..) mit entsprechendem Stecker
Transponder ID für Robitronic / EasyLap Rundenzeitmesssysteme Grösse: 10 x 11.5 x 5.1 mmGewicht: 2gBetriebsspannung: 4.2 - 6 VoltStromverbrauch: 50mA max.Stromversorgung direkt über den Receiver oder ICS-Port.Silikonkabel mit JST Stecker passend für Mini-Z und Micro/Nano RX (GL Racing, RTRC, PN Racing,..) mit entsprechendem Stecker.z.B. passend für die Transponderhalterungen GL-GT-OP-013 oder GL-GTR-OP-019
Ko Propo / Kyosho ASF NANO 4CH RECEIVERVariante mit Kunststoff-Gehäuse
Description:This RC receiver unit is KYOSHO ASF compatible. It offers full 4-channel support in ultra-light weight and micro size. It is designed for micro racing cars. Features:1. KYOSHO 2.4GHz ASF compatible2. High performance CPU enhance exactness control feeling3. 4 channel support4. Micro size (19mm x12mm)5. Ideal for any micro RC racing chassis6. Added failsafe function7. Operating Voltage 3.7V - 8.4V:8. ProductWeight: 2g Compatible Transmitters:KO PROPO EX-1 ASFKO PROPO EX-6RKO PROPO EX-6KYOSHO KT-18KO PROPO EX-5UR ASFKO PROPO 901SM/902SM RF Module Package Included:1 x Receiver2 x 1.5mm 3P JST plug with cable Bind and Failsafe:Power on your transmitter and receiver. Adjust transmitter each channel to the exact position you want to have in failsafe mode. Transmitter set to pair mode. Receiver led should be on. Long press the pair button. After around 2 seconds the LED will turn to fast flashing first then turn to on status again. Now the pairing is done and the failsafe data is saved. Power off the transmitter and receiver then power on again then the receiver will work.
Receiver Einheit für das Mini-Z Evo Board kompatibel mit der FLYSKY Noble NB4 Fernsteuerung.Technische Daten:Funkfrequenz: 2,4 GHzDrahtloses Protokoll: AFHDS 3Reichweite: > 50m (Boden)Antennentyp: EinzelantenneAbmessungen: 20*14*3,5 mmkompatibel mit Mini-z EVO Board
Description:
Thisreceiveris designed for KO PROPO FHSS protocol transmitters.
It supports the Ultra Response mode of KO PROPO EX-1,KO PROPO EX-2andKO PROPO EX-RR Transmitters, RF-903FH and RF904FH modules. It offers 4-channel support in a compact size!
DasMikro Racing KO PROPO FHSS 4CH Nano Antennaless ReceiverFeatures:
Dimensions:22mmx12mmx7mm
Weight:3g
Operating voltage: 4.8 to 7.4V
Frequency:2.4GHz(FHSS)
Number of channels:4CH
All response modescompatible
Fail safe function ready
Compatible Transmitters/Modules
KO PROPOEX-1
KO PROPOEX-2
KO PROPO EX-RR
RF-903FH
RF-904FH
Package Included:
1 x Receiver
4 x 1.5mm 3P plug with cables
Receiver Einheit für das Mini-Z Evo Board kompatibel mit FUTABA T-FHSS Fernsteuerungen.Technische Daten:Funkfrequenz: 2,4 GHzDrahtloses Protokoll:
T-FHSS
Reichweite: > 50m (Boden)Antennentyp: EinzelantenneAbmessungen: 20*14*3,5 mmkompatibel mit Mini-z EVO Board
Flysky Noble NB Empfänger mit Kunststoff GehäuseDieser Nano Receiver ist mit FlySky AFHDS3 kompatibel.4 KanäleleichtGrösse: 19 x 12 mmPassende Fernsteuerung:FlySky Noble NB4FlySky Noble NB4 Pro
Der Ezrun MINI28-Regler bietet als Regler im kleinen Format das, was man für RC-Autos im Maßstab 1:28 benötigt. Mit über 25 verschiedene einstellbare Parameter zeigt der MINI28, dass durch ihn das Fahrzeug mühelos zahlreichen Situationen bewältigen kann. Wer also gerne Mini fährt und einen Brushless-Motor verwendet, für den ist dieser Hobbywing Regler die ideale Ergänzung im Setup.Einstellbare ParameterAllgemeinFahrmodus, Max. Geschwindigkeit, Rückwärtsgeschwindigkeit, Abschaltspannung, Regler-Überhitzungsschutz, BEC-Spannung, Motor-DrehrichtungGas-KontrolleGas-Rate, Neutralbereich, Anfangskraft des Gashebels, Coast, PWM-Antriebsfrequenz, Softening-Wert, Softening-BereichBrems-KontrolleHandbremsfunktion, max. Bremskraft, Bremsrate, BremsfrequenzTimingBoost Timing, Boost Timing Aktivierung, Boost Start-Drehzahl, Boost End-Drehzahl, Turbo Timing, Turbo-Verzögerung, Turbo-Erhöhungsrate, Turbo-ReduzierungsrateEigenschaftenSpeziell entwickelt für den Einsatz im 1/28-Mini RacingKleiner und leichter ReglerÜber 25 verschiedene ParameterImmense Verbesserung des FahrgefühlsVerschiedene eingebaute SchutzfunktionenKompatibel mit der LCD G2-Programmierbox und dem OTA-ProgrammiermodulTechnische SpezifikationenStrom (dauer/kurz):30A / 80AMotortyp:Brushless MotorenMotorlimit:1626er MotorenLiPo-/NiMH-Zellen:2S LiPoBEC-Ausgang:6V / 7,4V (einstellbar), 3,5A Switch-ModeAbmessungen:22,7x14,2x11,8mmGewicht:5g (ohne Kabel)Einsatz:1/28 MiniProgrammierung:Geteilt mit GaskabelLieferumfang Ezrun Mini28 Brushless ReglerManual / Anleitung Mini28 - EnglischMini28 - Einstellparameter - Deutsch
Die erste Motorenserie von Hobbywing, die speziell für den Einsatz in 1/28er-Modellen entwickelt wurde. Die volle Kraft dieses Motors wird außerdem erst entfalten, wenn er zusammen mit dem Ezrun Mini28-Regler verwendet wird. Erst dann steht Timing Advance zur Verfügung, das die Spitzengeschwindigkeiten massiv erhöhen kann.Eigenschaften:Verbesserte SpitzengeschwindigkeitPräzises AnsprechverhaltenHohe Effizienz bei geringer TemperaturEntwickelt für die Anforderungen von HochleistungsfahrernEinfach zerlegbar für WartungsarbeitenTechnische Daten:Typ:Brushless, SensoredDrehzahl:3500kVLeerlaufstrom:0,4AZellenzahl LiPo:2SAnzahl Pole:2Durchmesser:16mmLänge:26mmWellenlänge:-Wellendurchmesser:2mmGewicht:18gEinsatz:1/28 MiniLieferumfang:1x Motor1x Bedienungsanleitung (Englisch)
Die erste Motorenserie von Hobbywing, die speziell für den Einsatz in 1/28er-Modellen entwickelt wurde. Die volle Kraft dieses Motors wird außerdem erst entfalten, wenn er zusammen mit dem Ezrun Mini28-Regler verwendet wird. Erst dann steht Timing Advance zur Verfügung, das die Spitzengeschwindigkeiten massiv erhöhen kann.Eigenschaften:Verbesserte SpitzengeschwindigkeitPräzises AnsprechverhaltenHohe Effizienz bei geringer TemperaturEntwickelt für die Anforderungen von HochleistungsfahrernEinfach zerlegbar für WartungsarbeitenTechnische Daten:Typ:Brushless, SensoredDrehzahl:5000kVLeerlaufstrom:0,5AZellenzahl LiPo:2SAnzahl Pole:2Durchmesser:16mmLänge:26mmWellenlänge:-Wellendurchmesser:2mmGewicht:18gEinsatz:1/28 MiniLieferumfang:1x Motor1x Bedienungsanleitung (Englisch)
Die erste Motorenserie von Hobbywing, die speziell für den Einsatz in 1/28er-Modellen entwickelt wurde. Die volle Kraft dieses Motors wird außerdem erst entfalten, wenn er zusammen mit dem Ezrun Mini28-Regler verwendet wird. Erst dann steht Timing Advance zur Verfügung, das die Spitzengeschwindigkeiten massiv erhöhen kann.Eigenschaften:Verbesserte SpitzengeschwindigkeitPräzises AnsprechverhaltenHohe Effizienz bei geringer TemperaturEntwickelt für die Anforderungen von HochleistungsfahrernEinfach zerlegbar für WartungsarbeitenTechnische Daten:Typ:Brushless, SensoredDrehzahl:6500kVLeerlaufstrom:0,6AZellenzahl LiPo:2SAnzahl Pole:2Durchmesser:16mmLänge:26mmWellenlänge:-Wellendurchmesser:2mmGewicht:18gEinsatz:1/28 MiniLieferumfang:1x Motor1x Bedienungsanleitung (Englisch)
Die verbesserte LCD Programmierbox von Hobbywing ist die ideale Ergänzung, um Brushless Regler bequem und einfach zu programmieren, sei es unterwegs oder Zuhause am Computer. Dabei werden die eingestellten Werte auf dem 16x2 Felder-LCD Display angezeigt, sodass man stets weiß, was man gerade einstellt. Mit dem beiliegenden USB-C Adapter kann die Box zusätzlich als Verbindung des Reglers mit dem Computer dienen, um so beispielsweise auch die Firmware zu aktualisieren.Wer noch mehr Funktionalität benötigt, der kann mit der Programmierbox außerdem noch die Spannung einzelner LiPo-Zellen oder ganzer Packs messen. Also drei hervorrangende Funktionen in einem handlichen Gerät.Hinweis: Bitte beachten Sie die Programmiereinstellungen Ihres Reglers, um zu erfahren, welche Werte eingestellt werden können.Technische Daten:Eingangsspannung DC: 4,5-12,6V(Besitzt der Regler keinen eingebauten BEC, so muss ein separater Akku verwendet werden) Display: 16x2 Zeichen LCDAnschlüsse: USB-C, Regler, StromversorgungKompatibilität zur LiPo-Messung: XH, EH, HP/PQAbmessungen: 90x51x17mmGewicht: 65gDiese Multifunktions LCD Program Box ist geeignet für folgende Regler:Ezrun Mini28 sensored brushless ESCXeRun Auto-Regler: Version 2.0, 2.1, 3.0, 3.1 und neuerEZRUN Auto-Regler: Version 2.0 und neuerPLATINUM Helikopter/Flug-ReglerSeaking Pro Boot-Regler
Der Tunalyzer ist das neueste Werkzeug, das Hobbywing Fahrern ab sofort ans Herz legt, um optimale Ergebnisse bei der Auswahl und Wartung von Motoren zu erreichen. Erzielen Sie bei 12 voreingestellten Testparametern aussagekräftige und genaue Ergebnisse. Dabei wird die Messung u.a. vom eingebauten Spannungsregler unterstützt, der sicherstellt, dass stets bei einer gleichen Spannungen vergleichbare Ergebnisse entstehen.Wer mit dem Tunalyzer seine Motoren durchchecken möchte, braucht keine Sorge wegen der Komatibilität haben. Immerhin werden Motoren mit bis zu 60 Polen problemlos unterstützt. Genauso wenig spielt es eine Rolle, ob der Motor nun über einen Sensor verfügt oder nicht, Brushed oder Brushless ist. Das Beste daran: Die dabei gemessene Drehzahl wird in Echtzeit dargestellt. Doch nicht nur Motoren lassen sich hier einem Test unterziehen. Auch Regler und Servos können beispielsweise über den PWM-Anschluss mit dem Tunalyzer verbunden und getestet werden.EigenschaftenEin Motortester und Tuningwerkzeug der nächsten GenerationPräzise TestergebnisseKonsequent und zuverlässig8 verschiedene Auto-Test-Parameter4 verschiedene manuelle Test-ParameterBluetooth-Unterstützung zur Nutzung der HW-Link AppTechnische SpezifikationenEingangsspannung:6 - 16.8V (2 - 4S LiPo)Motor-Typ:Sensored & Sensorless Brushless Motor2- bis 60-poligGenauigkeit(Stromwert):+/- 0,01AGenauigkeit(Timing, Rotor, Signal):0,1 GradFunktionen:1) Messung von: Motorstrom / kV-Wert / Drehzahl, Endbell-Timing / Abweichung, Rotorasymmetrie, Hallsignalabweichung und Motortemperatur2) Einstellung und Aktualisierung des Reglers ein (der das OTA-Bluetooth-Modul unterstützen kann).Abmessungen:122.8 x 64.6 x 39mm (inkl. Knopfhöhe)Gewicht:144gLieferumfang1x Tunalyzer
Dank des OTA Programmiermoduls können Hobbywing-Regler auf moderne und intuitive Weise programmiert werden. Über das gesendete Bluetooth-Signal des Moduls wird der Regler kabellos mit einem Smartphone verbunden. In der "HW Link"-App von Hobbywing können dann sämtliche Parameter wie gewohnt ausgewählt und eingestellt werden.Das OTA Programmiermodul ist darüber hinaus kleiner und leichter als eine übliche Programmierbox und passt damit bequem in jede Hosentasche. Also perfekt geeignet für unterwegs.FeaturesEinfache BedienungKompaktes DesignAufzeichnen der Daten in Echtzeit (kompatibler Regler vorausgesetzt)Firmware-Update direkt über die "HW Link"-AppInklusive Reset-Knopf auf der Modul-Unterseite
Geeignet für folgende HobbyWing Produkte
Ezrun Mini28 sensored brushless ESCXeRun Auto-Regler: Version 2.0, 2.1, 3.0, 3.1 und neuerEZRUN Auto-Regler: Version 2.0 und neuerPLATINUM Helikopter/Flug-ReglerSeaking Pro Boot-Regler
Technische DatenAbmessung:30x25,5x8,5mmGewicht:10,2gEingangsspannung:5-12,6VReichweite:0-3mUnterstützte Bluetooth-Version:>/= 4.0 Hinweis: Die "HW Link"-App von Hobbywing können Sie für Android-Geräte im Google Play Store sowie für IOS-Geräte im Apple Store herunterladen.
Erleben Sie grandiose Action mit der Ezrun-Mini Combo für den Einsatz in 1/28 Fahrzeugen. Der Mini28-Regler bietet weit über 25 verschiedene Parameter an, die nach je nach Anforderung und persönlichem Geschmack angepasst werden können. Der dazu passende 1626er Motor mit 5000kV stellt die ideale Ergänzung dar, um gleich direkt loslegen zu können ohne erst noch einen geeigneten Motor suchen zu müssen.EigenschaftenSpeziell entwickelt für den Einsatz im 1/28-Mini RacingKleiner und leichter Regler mit über 25 verschiedenen ParameterEinfach programmierbar mit der LCD G2-Programmierbox und dem OTA-ProgrammiermodulImmense Verbesserung des Fahrgefühls und der SpitzengeschwindigkeitPräzises AnsprechverhaltenEntwickelt für die Anforderungen von HochleistungsfahrernVerschiedene eingebaute SchutzfunktionenEinfach zerlegbarer Motor für WartungsarbeitenDas Set besteht aus folgenden Komponenten:Regler Ezrun Mini28 30A 2SElektromotor Ezrun 1626 5000kVTechnische Daten:ReglerStrom (Dauer/Spitze):30A / 80AZellenzahl:2S LiPoBEC Spannung:6-7,4V (einstellbar), 3,5V Switch-ModeAbmessung:22,7x14,2x11,8mmGewicht:5g (ohne Kabel)Anwendung:1/28 MiniMotorTyp:SensoredPole:2RPM/Volt5000kVAußendurchmesser:16mmLänge:26mmWellendurchmesser:2mmGewicht:18gAnwendung:1/28 MiniLieferumfang:1x Ezrun Mini28-Regler1x 1626er Motor mit 5000kV1x Anleitung (Englisch)
Manual / Anleitung Mini28 - EnglischMini28 - Einstellparameter - Deutsch
This RC receiver unit is Kyosho & Ko Propo ASF
compatible. It offers full 4-channel support in ultra- light weight and micro
size. It is ideal for micro racing cars.
Channels: 4CH
Weight: 3.5g
Dimension: 19×12mm
Compatibility
Compatible with ASF remote control system.
Suitable for remote control
KO PROPO EX-1 FHSS
KO PROPO EX-2
KO PROPO EX-6R
KO PROPO 903FH/904FH RF Module
Bind
- Press the BIND button and power on the receiver, the
receiver’s led will flash quickly.
- Put the transmitter into bind mode.
- The receiver’s led will flash slowly when the binding is
successful.
- Disconnect receiver’s power and reconnect the power cable
to the receiver.
- Now is should working normally.
This RC receiver unit is Kyosho & Ko Propo ASF
compatible. It offers full 4-channel support in ultra- light weight and micro
size. It is ideal for micro racing cars.
Channels: 4CH
Weight: 3.5g
Dimension: 22×12mm
Compatibility
Compatible with ASF remote control system.
Suitable for remote control
KO PROPO EX-1 FHSS
KO PROPO EX-2
KO PROPO EX-6R
KO PROPO 903FH/904FH RF Module
Bind
- Press the BIND button and power on the receiver, the
receiver’s led will flash quickly.
- Put the transmitter into bind mode.
- The receiver’s led will flash slowly when the binding is
successful.
- Disconnect receiver’s power and reconnect the power cable
to the receiver.
- Now is should working normally.
Single Shield dry ceramic motor bearings for 1/28 scale brushless motors (PN/GL) We suggest picking up a bottle of ProLube, you should not run them dry.
MMK’s (Motor Maintenance Kit)
Kit comes with:
2 dry ceramic single shield motor bearings1 bottle of ProLubeJIG for pressing bearing out of the sensor board side(PN and rocket style motors)Tool for tapping the bearing out
Stock motor bearings are low quality bearings, expect .1-.3 lower amp draw, longer runtime, quicker acceleration.
Farbe: Flourescent yellowWatch Youtube Video
MX EVO BA1 ManualMX EVO BA1 is a switching work mode product developed for MX EVO RX series products . After the MX EVO RX is installed in the EVO BA1 , the MX EVO RX works in the 4CH PWM standard signal mode .Features :Size: 16 . 2*15 . 2*6 . 5mm;Weight: 0 . 95g;Working voltage: 3 . 5V ~ 8 . 5V;Let all products of MX EVO RX series output 4CH PWM signal;Provide online firmware interface for MX EVO RX series products (Note 1) .Note 1: MX EVO RX -SANWA V2 . 15 does not support online firmware upgrade , but can read firmware version andother information .Interface (EVO BA1 on the left, EVO BA1 with MX EVO RX-SANWA installed on the left):CH1: STCH2: THCH3: AUX1CH4: AUX2/DATA(Online firmware upgrade interface)GUI download link: update . crossover -rx . com/mxo .zip
Product Type: MX EVO
RX-DSM2
Protocol: DSM/DSM2
Size: 10.0*13.5*3.5mm
Work Volt: 3.0V/3.3V
Reaction Time:
EVO->5.5ms - 4CH PWM->5.5/11ms
Support KYOSHO EVO
Mode (MR-03EVO/MA-03EVO): Yes
Support 4CH PWM OUTPUT
Mode: Yes
Support 1/72-1/64 RC
Car Mode: Yes
Support 1/43-1/24 RC
Car Mode: Yes
FW UPDATE: Yes
Kompatible Spektrum Fernsteuerungen:
DX2EDX3CDX4SDX5CDX5-ProDX5-Rugged
Anleitung
The Marka Racing Brushless Motor 2500kv have much-more torque and acceleration than others VE motor.
The Marka Motor heatsink can is annodized with black color and the Alu end-bell is annodized in red color.
In this way we tryed to keep Marka brand colors and offer a nice design. SpecificationsScale: 1/28th BrushlessSensorlessRPM: 23000 with 8.4VKV Rating: 2469Kv LiPo/Nimh Cells: 2S or 4xNimh 1.2V (4.8V) No-load Current: 0.2A Timing: Fix Weight: 17.3grAluminium Heatsink Canhas the 15mm diameter same as normal brushed 130 motor.has holes in the front and lateral sides for a good ventilation that allows for a better heat dispersionin the front there are M2 screws holes that allows to fit the motor on all the types of Miniz motor mount and chassis has printed Marka logo on the lateral side and the Kv number to recognize the motor type Stator high quality wires used for high temperature and longevity life high quality wires producing good torque and speed Rotor The rotor has the following size 6.0x14.5mm is the standard one. The rotor is interchangeable and is possible change with other size 6x(11.5mm-12.5mm-13.5mm-15.5mm-16.5mm).
The shaft is 2mm. Bearing JAPAN high quality duel ball Bearing included Compatible Fits in all Kyosho, PN Racing, GL Racing, Atomic, Xpower motor mount.
Fits in all Mini-Z chassis MR02, MR03, F1, AWD, GLR, GLA, GLF, BZ ect. Wire ConnetionFor connect to the ESC use 22AWG/0.35mm silicon wire Screws To mount the motor on the motor mount, use the following screws: On PN Racing motor mount use M2x4mm countersunk screws for aluminum/metal On GL Racing (GLR, GLA e GLF) or Atomic (BZ) motor mount use M2x4mm button screws for aluminum/metal The screws are not included.
The Marka Racing Brushless Motor 3500kv have much-more torque and acceleration than others VE motor.
The Marka Motor heatsink can is annodized with black color and the Alu end-bell is annodized in red color.
In this way we tryed to keep Marka brand colors and offer a nice design. SpecificationsScale: 1/28th BrushlessSensorlessRPM: 30000 with 8.4VKV Rating: 3467Kv LiPo/Nimh Cells: 2S or 4xNimh 1.2V (4.8V) No-load Current: 0.2A Timing: Fix Weight: 17.3grAluminium Heatsink Canhas the 15mm diameter same as normal brushed 130 motor.has holes in the front and lateral sides for a good ventilation that allows for a better heat dispersionin the front there are M2 screws holes that allows to fit the motor on all the types of Miniz motor mount and chassis has printed Marka logo on the lateral side and the Kv number to recognize the motor type Stator high quality wires used for high temperature and longevity life high quality wires producing good torque and speed Rotor The rotor has the following size 6.0x14.5mm is the standard one. The rotor is interchangeable and is possible change with other size 6x(11.5mm-12.5mm-13.5mm-15.5mm-16.5mm).
The shaft is 2mm. Bearing JAPAN high quality duel ball Bearing included Compatible Fits in all Kyosho, PN Racing, GL Racing, Atomic, Xpower motor mount.
Fits in all Mini-Z chassis MR02, MR03, F1, AWD, GLR, GLA, GLF, BZ ect. Wire ConnetionFor connect to the ESC use 22AWG/0.35mm silicon wire Screws To mount the motor on the motor mount, use the following screws: On PN Racing motor mount use M2x4mm countersunk screws for aluminum/metal On GL Racing (GLR, GLA e GLF) or Atomic (BZ) motor mount use M2x4mm button screws for aluminum/metal The screws are not included.
The Marka Racing Brushless Motor 4500kv have much-more torque and acceleration than others VE motor.
The Marka Motor heatsink can is annodized with black color and the Alu end-bell is annodized in red color.
In this way we tryed to keep Marka brand colors and offer a nice design. SpecificationsScale: 1/28th BrushlessSensorlessRPM: 43000 with 8.4VKV Rating: 4467Kv LiPo/Nimh Cells: 2S or 4xNimh 1.2V (4.8V) No-load Current: 0.2A Timing: Fix Weight: 17.3grAluminium Heatsink Canhas the 15mm diameter same as normal brushed 130 motor.has holes in the front and lateral sides for a good ventilation that allows for a better heat dispersionin the front there are M2 screws holes that allows to fit the motor on all the types of Miniz motor mount and chassis has printed Marka logo on the lateral side and the Kv number to recognize the motor type Stator high quality wires used for high temperature and longevity life high quality wires producing good torque and speed Rotor The rotor has the following size 6.0x14.5mm is the standard one. The rotor is interchangeable and is possible change with other size 6x(11.5mm-12.5mm-13.5mm-15.5mm-16.5mm).
The shaft is 2mm. Bearing JAPAN high quality duel ball Bearing included Compatible Fits in all Kyosho, PN Racing, GL Racing, Atomic, Xpower motor mount.
Fits in all Mini-Z chassis MR02, MR03, F1, AWD, GLR, GLA, GLF, BZ ect. Wire ConnetionFor connect to the ESC use 22AWG/0.35mm silicon wire Screws To mount the motor on the motor mount, use the following screws: On PN Racing motor mount use M2x4mm countersunk screws for aluminum/metal On GL Racing (GLR, GLA e GLF) or Atomic (BZ) motor mount use M2x4mm button screws for aluminum/metal The screws are not included.
The Marka Racing Brushless Motor 5500kv have much-more torque and acceleration than others VE motor.
The Marka Motor heatsink can is annodized with black color and the Alu end-bell is annodized in red color.
In this way we tryed to keep Marka brand colors and offer a nice design. SpecificationsScale: 1/28th BrushlessSensorlessRPM: 47000 with 8.4VKV Rating:
5467
Kv LiPo/Nimh Cells: 2S or 4xNimh 1.2V (4.8V) No-load Current: 0.4A Timing: Fix Weight: 17.4grAluminium Heatsink Canhas the 15mm diameter same as normal brushed 130 motor.has holes in the front and lateral sides for a good ventilation that allows for a better heat dispersionin the front there are M2 screws holes that allows to fit the motor on all the types of Miniz motor mount and chassis has printed Marka logo on the lateral side and the Kv number to recognize the motor type Stator high quality wires used for high temperature and longevity life high quality wires producing good torque and speed Rotor The rotor has the following size 6.0x14.5mm is the standard one. The rotor is interchangeable and is possible change with other size 6x(11.5mm-12.5mm-13.5mm-15.5mm-16.5mm).
The shaft is 2mm. Bearing JAPAN high quality duel ball Bearing included Compatible Fits in all Kyosho, PN Racing, GL Racing, Atomic, Xpower motor mount.
Fits in all Mini-Z chassis MR02, MR03, F1, AWD, GLR, GLA, GLF, BZ ect. Wire ConnetionFor connect to the ESC use 22AWG/0.35mm silicon wire Screws To mount the motor on the motor mount, use the following screws: On PN Racing motor mount use M2x4mm countersunk screws for aluminum/metal On GL Racing (GLR, GLA e GLF) or Atomic (BZ) motor mount use M2x4mm button screws for aluminum/metal The screws are not included.
The Marka Racing Brushless Motor 7500kv have much-more torque and acceleration than others VE motor.
The Marka Motor heatsink can is annodized with black color and the Alu end-bell is annodized in red color.
In this way we tryed to keep Marka brand colors and offer a nice design. SpecificationsScale: 1/28th BrushlessSensorlessRPM: 63000 with 8.4VKV Rating:
7430
Kv LiPo/Nimh Cells: 2S or 4xNimh 1.2V (4.8V) No-load Current: 0.4A Timing: Fix Weight: 17.7grAluminium Heatsink Canhas the 15mm diameter same as normal brushed 130 motor.has holes in the front and lateral sides for a good ventilation that allows for a better heat dispersionin the front there are M2 screws holes that allows to fit the motor on all the types of Miniz motor mount and chassis has printed Marka logo on the lateral side and the Kv number to recognize the motor type Stator high quality wires used for high temperature and longevity life high quality wires producing good torque and speed Rotor The rotor has the following size 6.0x14.5mm is the standard one. The rotor is interchangeable and is possible change with other size 6x(11.5mm-12.5mm-13.5mm-15.5mm-16.5mm).
The shaft is 2mm. Bearing JAPAN high quality duel ball Bearing included Compatible Fits in all Kyosho, PN Racing, GL Racing, Atomic, Xpower motor mount.
Fits in all Mini-Z chassis MR02, MR03, F1, AWD, GLR, GLA, GLF, BZ ect. Wire ConnetionFor connect to the ESC use 22AWG/0.35mm silicon wire Screws To mount the motor on the motor mount, use the following screws: On PN Racing motor mount use M2x4mm countersunk screws for aluminum/metal On GL Racing (GLR, GLA e GLF) or Atomic (BZ) motor mount use M2x4mm button screws for aluminum/metal The screws are not included.
NEW V3.1 Version
Motor Can
the all new motor can has bigger and more ventilation holes allowing better heat dispersion thus providing better run time
front section has evenly spaced mounting screws holes that is compatible and fits for all after market motor holder and chassis
End Cap
newly designed end cap now comes with side locking screws that firmly secures the end cap and PCB.
Stator
high temp wires used for longevity
proprietary wiring producing better speed, torque and smoothness
Features
Changeable armature
New design air vent get more cooling
High-Temperature wire
15mm diameter motor can, same as normal brushed 130 motors. Fits in all Kyosho, PN, and aftermarket motor mounts.
Fits in all Mini-Z chassis AWD, F1, MR02 and MR03.
Much more torque and acceleration than others VE motor.
No loading RPM 22000 on 4.8V, amp draw only 0.28A
Four mounting holes to allow different angles of motor terminals.
Eight venting holes prevent heat buildup.
Can and endbell ball bearing from Japan.
Recommend gear ratio 3.95 to 5.00
Connection:
M1 to Orange Wire
M2 to Yellow Wire
M3 to Blue Wire
NEW V3.1 Version
Motor Can
the all new motor can has bigger and more ventilation holes allowing better heat dispersion thus providing better run timefront section has evenly spaced mounting screws holes that is compatible and fits for all after market motor holder and chassis
End Cap
newly designed end cap now comes with side locking screws that firmly secures the end cap and PCB.
Stator
high temp wires used for longevityproprietary wiring producing better speed, torque and smoothness
Features
Changeable armatureNew design air vent get more coolingHigh-Temperature wire15mm diameter motor can, same as normal brushed 130 motors. Fits in all Kyosho, PN, and aftermarket motor mounts.Fits in all Mini-Z chassis AWD, F1, MR02 and MR03.Much more torque and acceleration than others VE motor.No loading RPM 22000 on 4.8V, amp draw only 0.28AFour mounting holes to allow different angles of motor terminals.Eight venting holes prevent heat buildup.Can and endbell ball bearing from Japan.Recommend gear ratio 3.95 to 5.00
Connection:M1 to Orange WireM2 to Yellow WireM3 to Blue Wire
NEW V3.1 Version
Motor Can
the all new motor can has bigger and more ventilation holes allowing better heat dispersion thus providing better run timefront section has evenly spaced mounting screws holes that is compatible and fits for all after market motor holder and chassis
End Cap
newly designed end cap now comes with side locking screws that firmly secures the end cap and PCB.
Stator
high temp wires used for longevityproprietary wiring producing better speed, torque and smoothness
Features
Changeable armatureNew design air vent get more coolingHigh-Temperature wire15mm diameter motor can, same as normal brushed 130 motors. Fits in all Kyosho, PN, and aftermarket motor mounts.Fits in all Mini-Z chassis AWD, F1, MR02 and MR03.Much more torque and acceleration than others VE motor.No loading RPM 22000 on 4.8V, amp draw only 0.28AFour mounting holes to allow different angles of motor terminals.Eight venting holes prevent heat buildup.Can and endbell ball bearing from Japan.Recommend gear ratio 3.95 to 5.00
Connection:M1 to Orange WireM2 to Yellow WireM3 to Blue Wire
NEW V4 Version
Motor Can
the all new motor can has bigger and more ventilation holes allowing better heat dispersion thus providing better run time
front section has evenly spaced mounting screws holes that is compatible and fits for all after market motor holder and chassis
End Cap
newly designed end cap now comes with side locking screws that firmly secures the end cap and PCB.
Stator
high temp wires used for longevity
proprietary wiring producing better speed, torque and smoothness
Features:
Changeable armature
New design air vent gets more cooling
High-Temperature wire
15mm diameter motor can, same as normal brushed 130 motors.
Fits in all Kyosho, PN, and aftermarket motor mounts.
Fits in all Mini-Z chassis AWD, F1, MR02, MR03, MR04, also GL Racing, MWX, RX28, RTA,...
Much more torque and acceleration than other VE motors.
No loading RPM 22000 on 4.8V, amp draw only 0.28A
Four mounting holes to allow different angles of motor terminals.
Eight venting holes prevent heat buildup.
Can and end bell ball bearing from Japan.
Recommend gear ratio 3.95 to 5.00
Connection M1 to Orange Wire, M2 to Yellow Wire, M3 to Blue Wire (Kyoso MR03 Chassis)
LED Light Terminal for Kyosho Auto Scale dummy chassis, the perfect addition to your Auto Scale bodies. Turn on your Auto Scale body's headlights and taillights without the need of your Mini-Z chassis, showcase your realistic mini-z Autoscale collection. If you already have the PN racing realistic car garage, now you can display all your Auto Scale bodies with its lights on! Features automatic low voltage cut off at 3.2V to protect your Lipo battery.
Allow users to add 2 separate sets of LED lights for more detailed presentation. Compatible LED light Set: 500429 PN Racing LED Light Set for (Kyosho Mini-Z MR03 Sports/RWD/AWD/4x4 500429Y PN Racing LED Light Set 2W/2R/2Y for (Kyosho Mini-Z MR03 Sports/RWD/AWD/4x4)MZW429R Kyosho Mini-Z LED Light Clear & Red Unit set (for MR03S & RWD & 4x4 only) Compatible 1S Lipo Battery:
700444
700430
700380 Require 1s Lipo Battery (not included) with female MOLEX plug (max size: 40mm x 25mm x 10mm) Tips for installing LED, prevent light leak, detail about dummy chassis LED terminal system
Technical /Specifications
Continuous current: 20A
Burst Current: (10sec): 40A
Battery Input: 3.7V LiPo x 2 cells, 1.2V NiMh x 6 cells
BEC Output: Linear 6V/1.5A
Weight (not include wiring): 4.5g
Dimension: 22.8mmx13.5mmx9.5mm
Mini-Z Motor limit with 2cell x 3.7V LiPo. The motor timing is at 0 deg. 10000kv or below
Features
Ultra-smooth, Precise Throttle and Braking
Control
Compatible with Sensored / Sensorless Brushless Motors
Data Analysis Capability (RPM, Low voltage and ESC temperature)
Hot Wire PC Interface for Advanced Programming and Updating #TP-RADON-USB (Not include in the package)
Easily Programming through the LED Programmer #500821 (Not include in the package)
Built-in one-touch On/Off switch with LED
Built-in Low voltage cut-off, Overheat protection and signal loss protection
Package Inculed:
1 x Anima 20A ESC
1 x Motor Sensor Wire for #500822 PN Motor Anima35 Anima 55 Anima75
1 x Wire Connector ESC to Reciver #500823
1 x JST Femail plug for 2S Lipo BatteryInstruction Manual DownloadLED Program Card Info