Nexx Racing Dual-Spring Center Oil Shock Set (Blue)
22,50 CHF*
Gehäusefarbe:
Blau
Features: Controls rear pitching to minimize vibration. Delivers strong direct line running as well as cornering. NO OIL LEAK Specifications: Material: Aluminum and plastic Color: Red / Black/ Green/ Blue Extended Length (eye to eye): 29.5mm or 31mm or 33mm Each Weight: 2.3g Package List: 1* Center Shock set 1* Hex Cap Screw M2x8 1* Hex Cap Screw M2x12 3* Washer 2x4x0.5 1* Nut M2 2* Ball 3.5 2* Oring 2x4x1 1* Hex Flat head M2x6
NX-300-58-Blue
Nexx Racing Dual-Spring Center Oil Shock Set (Green)
22,50 CHF*
Gehäusefarbe:
Grün
Features: Controls rear pitching to minimize vibration. Delivers strong direct line running as well as cornering. NO OIL LEAK Specifications: Material: Aluminum and plastic Color: Red / Black/ Green/ Blue Extended Length (eye to eye): 29.5mm or 31mm or 33mm Each Weight: 2.3g Package List: 1* Center Shock set 1* Hex Cap Screw M2x8 1* Hex Cap Screw M2x12 3* Washer 2x4x0.5 1* Nut M2 2* Ball 3.5 2* Oring 2x4x1 1* Hex Flat head M2x6
NX-300-58-Green
Nexx Racing Dual-Spring Center Oil Shock Set (Red)
22,50 CHF*
Gehäusefarbe:
Rot
Features: Controls rear pitching to minimize vibration. Delivers strong direct line running as well as cornering. NO OIL LEAK Specifications: Material: Aluminum and plastic Color: Red / Black/ Green/ Blue Extended Length (eye to eye): 29.5mm or 31mm or 33mm Each Weight: 2.3g Package List: 1* Center Shock set 1* Hex Cap Screw M2x8 1* Hex Cap Screw M2x12 3* Washer 2x4x0.5 1* Nut M2 2* Ball 3.5 2* Oring 2x4x1 1* Hex Flat head M2x6
NX-300-58-Red
Nexx Racing Dual-Spring Center Oil Shock Set (Black)
22,50 CHF*
Gehäusefarbe:
Schwarz
Features: Controls rear pitching to minimize vibration. Delivers strong direct line running as well as cornering. NO OIL LEAK Specifications: Material: Aluminum and plastic Color: Red / Black/ Green/ Blue Extended Length (eye to eye): 29.5mm or 31mm or 33mm Each Weight: 2.3g Package List: 1* Center Shock set 1* Hex Cap Screw M2x8 1* Hex Cap Screw M2x12 3* Washer 2x4x0.5 1* Nut M2 2* Ball 3.5 2* Oring 2x4x1 1* Hex Flat head M2x6
NX-300-58-Black
Nexx Racing Dual Spring Center Oil Shock Premium - Black
26,00 CHF*
Features:Rear tilt control to minimize vibration.Provides strong straight line and cornering performance.The premium version is lighter in weight.With many types of springs with different hardnesses for players to use.Specifications:Material: Aluminum and plasticColor: Red / Black/ Silver/ PurpleExtended Length (eye to eye): 29.5mm or 31mm or 33mmEach Weight: 2.1gShock Oil 700cs/45WTPackage List:1* Center Oil Shock set1* Button Screw M2x101* Washer 2x4x21* Washer 2x4x0.51* Hex Nut M24* Pairs of springs
NXUSA-300-60-Black
Nexx Racing Dual Spring Center Oil Shock Premium - Silver
26,00 CHF*
Features:Rear tilt control to minimize vibration.Provides strong straight line and cornering performance.The premium version is lighter in weight.With many types of springs with different hardnesses for players to use.Specifications:Material: Aluminum and plasticColor: Red / Black/ Silver/ PurpleExtended Length (eye to eye): 29.5mm or 31mm or 33mmEach Weight: 2.1gShock Oil 700cs/45WTPackage List:1* Center Oil Shock set1* Button Screw M2x101* Washer 2x4x21* Washer 2x4x0.51* Hex Nut M24* Pairs of springs
NXUSA-300-60-Silver
%
Nexx Racing Mini-Z 2WD MR015/02/03 LCG 98-102mm Alu 7075 Bracelet Round Motor Mount (BLACK)
36,00 CHF*
45,00 CHF*
(20% gespart)
vorher 45,00 CHF*
New NEXX RACING precision CNC SWISS aluminum 7075 T6 motor mount is designed to replace stock plastic Kyosho Mini-Z motor mount and to support round brushless motors. It is designed for MR-03MM/ MR02MM/015 MM. NEXX Racing motor mount is very light in weight and even more than 20% lighter than the plastic version, yet very strong, made from aerospace aluminum 7075 T6Specifications:Weight: 4.2g (without T-plate)Designed for Kyosho Mini-Z 98 and 102mm MM chassis, 15mm round diameter brushless motors (Rocket, Ensotech, PN Racing, GL Racing, Atomic brushless motors ….)Features:– Lowest CG motor mount on the marketThe new motor mount is designed for the Mini-Z brushless motors. A lot of hours of engineering have been put into this motor to lower the C.G to lowest possible. You cannot go lower than this.– Lightest motor mount on the marketBesides being the lowest CG motor mount on the market, it is also the lightest weight motor mount on the market with just 5.1g in weight with carbon fiber T-plate and screws and only 4.2g without the carbon fiber T-plate, more than 20% lighter than stock plastic motor mount. To achieve this milestone, we have to machine the motor mount from a block of billet SWISS 7075 aluminum to minimize the number of parts, resulting in the lightest weight possible.– Innovative slot design to allow easy adjusting gear meshAdjusting gear mesh is not always an easy job, however with NEXX innovative method of adjusting the gear mesh, it’s very simple, fool-proof one screw driver operation.– Solid contructure:NEXX solves the problem of motors being ejected from crashes by a new method of lockup and hold the motor in secured position so that in hardest crashs, the motor cannot be ejected from the mount.– Free carbon fiber T-plateNEXX Racing motor mount also comes with a free high quality carbon fiber T-plate #5. Free of charge– Free carbon damper plateNEXX Racing motor mount also comes with a carbon damper plate free of charge.– Tridamper system:NEXX Racing motor mount is designed to the use with Nexxracing damper disk system or Nexx racing tridamper system.The package includes:1 x Precision CNC SWISS 7075 T6 aluminum motor mount4 x eccentric bearing holders to allow height adjustment of the motor mount.1 x carbon damper plate1 x Aluminum damper post1 x carbon fiber T-plate S#5 (strongest)
NX-262-BL
vorher 45,00 CHF*
Tipp
Nexx Racing Precision CNC 7075 Round Motor mount for 98-102 LM (BLACK)
40,00 CHF*
New NEXX RACING precision CNC SWISS aluminum 7075 T6 motor mount is designed to replace stock plastic Kyosho Mini-Z motor mount and to support round brushless motors. It is designed for MR-03MMLM/ MR02MMLM/015 MMLM (wheelbase 98mm to 102mm LM). NEXX Racing motor mount is very light weight even more than 20% lighter than plastic version, yet very strong, made from aerospace aluminum 7075 T6Specifications:Weight: 5.4g (without T-plate)Designed for Kyosho Mini-Z 98 and 102mm LM chassis ( 98mm to 102mm wheelbase LM )15mm round diameter brushless motors (Rocket, Ensotech, PN Racing, GL Racing, Atomic brushless motors ….)Features: Lowest CG motor mount on the marketThe new motor mount is designed for the Mini-Z brushless motors. A lot of hours of engineering have been put into this motor to lower the C.G to lowest possible. You cannot go lower than this.
Lightest motor mount on the market
Besides being the lowest CG motor mount on the market, it is also the lightest weight motor mount on the market with just 5.1g in weight with carbon fiber T-plate and screws and only 5.4g without the carbon fiber T-plate, more than 20% lighter than stock plastic motor mount. To achieve this milestone, we have to machine the motor mount from a block of billet SWISS 7075 aluminum to minimize the number of parts, resulting the lightest weight possible. Innovative slot design to allow easy adjusting gear mesh
Adjusting gear mesh is not always an easy job, however with NEXX innovative method of adjusting the gear mesh, it’s very simple, fool-proof one screw driver operation. Innovative carbon support design
NEXX solves the problem of motors being ejected from crashes by a new method of lockup and hold the motor in secured position so that in hardest crashs, the motor cannot be ejected from the chassis. Free carbon fiber T-plate NEXX Racing motor mount also comes with a free high quality carbon fiber #5 T-plate. Free of chargeFree alu 7075-T6 damper postsNEXX Racing motor mount also comes with alu damper posts free of charge. Easy center shock height adjustment
NEXX Racing motor mount offers the ability to adjust the height of center shock. The package includes: 1 x Precision CNC SWISS 7075 T6 aluminum motor mount 4 x eccentric bearing holders to allow height adjustment of the motor mount. 1 x alu damper post 1 x carbon fiber T-plate #5 (strongest)
NX-064
%
Nexx Racing Precision CNC 7075 Round Motor mount for 98-102 LM (RED)
32,00 CHF*
40,00 CHF*
(20% gespart)
DESCRIPTIONNew NEXX RACING precision CNC SWISS aluminum 7075 T6 motor mount is designed to replace stock plastic Kyosho Mini-Z motor mount and to support round brushless motors. It is designed for MR-03MMLM/ MR02MMLM/015 MMLM (wheelbase 98mm to 102mm LM). NEXX Racing motor mount is very light weight even more than 20% lighter than plastic version, yet very strong, made from aerospace aluminum 7075 T6Specifications:Weight: 5.4g (without T-plate)Designed for Kyosho Mini-Z 98 and 102mm LM chassis ( 98mm to 102mm wheelbase LM ), 15mm round diameter brushless motors (Rocket, Ensotech, PN Racing, GL Racing, Atomic brushless motors ….)Features:Lowest CG motor mount on the marketThe new motor mount is designed for the Mini-Z brushless motors. A lot of hours of engineering have been put into this motor to lower the C.G to lowest possible. You cannot go lower than this.Lightest motor mount on the marketBesides being the lowest CG motor mount on the market, it is also the lightest weight motor mount on the market with just 5.1g in weight with carbon fiber T-plate and screws and only 5.4g without the carbon fiber T-plate, more than 20% lighter than stock plastic motor mount. To achieve this milestone, we have to machine the motor mount from a block of billet SWISS 7075 aluminum to minimize the number of parts, resulting the lightest weight possible.Innovative slot design to allow easy adjusting gear meshAdjusting gear mesh is not always an easy job, however with NEXX innovative method of adjusting the gear mesh, it’s very simple, fool-proof one screw driver operation.Innovative carbon support designNEXX solves the problem of motors being ejected from crashes by a new method of lockup and hold the motor in secured position so that in hardest crashs, the motor cannot be ejected from the chassis.Free carbon fiber T-plateNEXX Racing motor mount also comes with a free high quality carbon fiber #5 T-plate. Free of chargeFree alu 7075-T6 damper postsNEXX Racing motor mount also comes with alu damper posts free of charge.Easy center shock height adjustmentNEXX Racing motor mount offers the ability to adjust the height of center shock.The package includes:1 x Precision CNC SWISS 7075 T6 aluminum motor mount4 x eccentric bearing holders to allow height adjustment of the motor mount.1 x alu damper post1 x carbon fiber T-plate #5 (strongest)
NX-061
Nexx Racing V-Line Front Suspension System (BLACK)
109,00 CHF*
NEXX RACING V-line Front Suspension system is designed with innovative features such as quick adjustable caster, quick adjustable camber, adjustable ride height…. It makes the Mini-Z looks much like a real car, not only fast but also stable, better cornering and better suspension overall. With locknuts and kingpins, V-LINE is designed to minimize most of the play resulting very smooth performance. The V-LINE suspension systems fits only Mini-Z MR03 wide base models and also fits PN 2.5 Chassis. For easy assembly, we pre-install the V-LINE suspension system at factory so it’s very easy and fast to assembly it on the Mini-Z.COLOR: BLACKV-LINE SUSPENSION SYSTEM FEATURESV- line suspension is designed with 2 V-shaped suspension forks to bring you a cool suspension system·Same width as stock. (MR02/ MR03 PNR2.5W Chassis width)·Suspension movement use ball joints instead of sliding knuckle and locknut easy adjustment play between knuckle and upper arm make joints will not pop out even during hard collision.·Adjustable camber from 0-30 degrees with 4 position eccentric shaft with easy operation·Quick adjustable caster by caster bar from 0-1.90 ·Both 00 and 10 lower A arms provided to facilitate suspension setup·Ride height adjustment with turn of a screw·All 3 tie rods 00, 0.50, 10 included ·High quality Precision CNC Swiss 7075 aluminumAnleitung V-Line
NX-030
Nexx Racing Mini-Z MR03 Carbon T-Plate S#3
4,00 CHF*
High quality carbon fiber T-plate for Kyosho Mini-Z MM chassisStrength #3We provide 4 levels of strength starting lowest strength #2 to highest strength #5.
NX-024
Tipp
Nexx Racing Mini-Z 2 WD MR015/02/03 LCG 98-102 mm Alu 7075 Square Motor Mount (RED)
40,00 CHF*
ew NEXX RACING precision CNC SWISS aluminum 7075 T6 motor mount is designed to replace stock plastic Kyosho Mini-Z motor mount. It is designed for Kyosho MR02/03 both RTR kits and EVO kits with stock square motors.Specifications:Weight: 5.8g (without T-plate)Designed for Kyosho Mini-Z 98 and 102mm MM chassisFits all stock Kyosho square brushed and square brushless motorsFits both Kyosho and PN Racing square motorsFeatures:?Lowest CG motor mount on the marketThe new motor mount is designed for the stock square motors. A lot of hours of engineering have been put into this motor to lower the C.G to lowest possible. You cannot go lower than this.? Lightest motor mount on the marketBesides being the lowest CG motor mount on the market, it is also the lightest weight motor mount on the market with less than 6g in weight. To achieve this milestone, we have to machine the motor mount from a block of billet SWISS 7075 aluminum to minimize the number of parts, resulting the lightest weight possible.? Innovative slot design to allow easy adjusting gear meshAdjusting gear mesh is not always an easy job, however with NEXX innovative method of adjusting the gear mesh, it’s very simple, fool-proof one screw driver operation.? Innovative carbon support designNEXX solves the problem of motors being ejected from crashes by a new method of lockup and hold the motor in secured position so that in hardest crashs, the motor cannot be ejected from the chassis.? Free carbon fiber T-plateNEXX Racing motor mount also comes with a free high quality carbon fiber T-plate. Free of charge? Free plastic damper postsNEXX Racing motor mount also comes with 2 plastic damper posts free of charge. This plastic damper post is compatible with stock plastic Kyosho parts only. It may need some modification job to fit third party upgrade parts.? Easy center shock height adjustmentNEXX Racing motor mount offers the ability to adjust the height of center shock.The package includes:1 x Precision CNC SWISS 7075 T6 aluminum motor mount4 x eccentric bearing holders to allow height adjustment of the motor mount.1 x Aluminum damper posts1 x carbon fiber T-plate S#5 (strongest)
NX-013
NX-248-BL Nexx Racing GIMBAL Motor Mount For Kyosho MR03 Chassis (BLACK)
40,00 CHF*
DESCRIPTIONManual NX-248 NEXXRACING GIMBAL MOTOR MOUNT FOR KYOSHO MR03 CHASSISWheelbase adjustable from 98mm to 102mm.This system is an improvement from the carbon T-Plate system and help to smoother your Mini-Z as it does not depend on the hardness of the carbon T-Plate.Lowest CG system on the market.Made from CNC 7075 Aluminium T6.Package includes:1x 7075 Aluminium Kyosho MR03 Gimbal Mount.2x 7075 Aluminium Side Lower Holders.1x Brass Middle Holder.1x Brushing.1x 7075 Aluminium Motor Mount (made from a billet).1x 3x5x0.3 Washer.1x Countersunk Screw (M2 x 10).2x Countersunk Screw (M2 x 4).1x 7075 Aluminium Center Shock Post.1x Carbon Fiber Damper Plate.4x Ball Bearing Adapters.1x Button Head Screw (M2 x 5).Requires:NX-283 NexxRacing Tri-damper system.NX-130 to NX134 NexxRacing Center Shock (depend on colour).
NX-248-BL
Nexx Racing Mini-Z MR03 Carbon T-Plate S#5
4,00 CHF*
High quality carbon fiber T-plate for Kyosho Mini-Z MM chassisStrength #5We provide 4 levels of strength starting lowest strength #2 to highest strength #5.
NX-026
Nexx Racing Mini-Z 2WD LCG 98-102mm Alu 7075 Round Motor Mount (RED)
40,00 CHF*
New NEXX RACING precision CNC SWISS aluminum 7075 T6 motor mount is designed to replace stock plastic Kyosho Mini-Z motor mount and to support round brushless motors. It is designed for MR-03MM/ MR02MM/015 MM. NEXX Racing motor mount is very light weight even more than 20% lighter than plastic version, yet very strong, made from aerospace aluminum 7075 T6Specifications:Weight: 4.5g (without T-plate)Designed for Kyosho Mini-Z 98 and 102mm MM chassis, 15mm round diameter brushless motors (Rocket, Ensotech, PN Racing, GL Racing, Atomic brushless motors ….)Features:? Lowest CG motor mount on the marketThe new motor mount is designed for the Mini-Z brushless motors. A lot of hours of engineering have been put into this motor to lower the C.G to lowest possible. You cannot go lower than this.? Lightest motor mount on the marketBesides being the lowest CG motor mount on the market, it is also the lightest weight motor mount on the market with just 5.1g in weight with carbon fiber T-plate and screws and only 4.5g without the carbon fiber T-plate, more than 20% lighter than stock plastic motor mount. To achieve this milestone, we have to machine the motor mount from a block of billet SWISS 7075 aluminum to minimize the number of parts, resulting the lightest weight possible.? Innovative slot design to allow easy adjusting gear meshAdjusting gear mesh is not always an easy job, however with NEXX innovative method of adjusting the gear mesh, it’s very simple, fool-proof one screw driver operation.? Innovative carbon support designNEXX solves the problem of motors being ejected from crashes by a new method of lockup and hold the motor in secured position so that in hardest crashs, the motor cannot be ejected from the chassis.? Free carbon fiber T-plateNEXX Racing motor mount also comes with a free high quality carbon fiber T-plate. Free of charge? Free plastic damper postsNEXX Racing motor mount also comes with 2 plastic damper posts free of charge. This plastic damper post is compatible with stock plastic Kyosho parts only. It may need some modification job to fit third party upgrade parts.? Easy center shock height adjustmentNEXX Racing motor mount offers the ability to adjust the height of center shock.The package includes:1 x Precision CNC SWISS 7075 T6 aluminum motor mount4 x eccentric bearing holders to allow height adjustment of the motor mount.1 x Aluminum damper post1 x carbon fiber T-plate S#5 (strongest)
NX-009
Nexx Racing Extended Precision CNC Polished Stainless Steel Damper Post
7,00 CHF*
Features:– Extremely Durable as made from Stainless Steel.– Polished Surface.– 13.5mm in length.Package Includes:– 1 x Damper Post (13.5 mm)– 2 x Button Hex Screws M2x5
NX-316
Nexx Racing Mini-Z 2WD MR015/02/03 LCG 98-102mm Alu 7075 Bracelet Round Motor Mount (RED)
45,00 CHF*
New NEXX RACING precision CNC SWISS aluminum 7075 T6 motor mount is designed to replace stock plastic Kyosho Mini-Z motor mount and to support round brushless motors. It is designed for MR-03MM/ MR02MM/015 MM. NEXX Racing motor mount is very light in weight and even more than 20% lighter than the plastic version, yet very strong, made from aerospace aluminum 7075 T6Specifications:Weight: 4.2g (without T-plate)Designed for Kyosho Mini-Z 98 and 102mm MM chassis, 15mm round diameter brushless motors (Rocket, Ensotech, PN Racing, GL Racing, Atomic brushless motors ….)Features:– Lowest CG motor mount on the marketThe new motor mount is designed for the Mini-Z brushless motors. A lot of hours of engineering have been put into this motor to lower the C.G to lowest possible. You cannot go lower than this.– Lightest motor mount on the marketBesides being the lowest CG motor mount on the market, it is also the lightest weight motor mount on the market with just 5.1g in weight with carbon fiber T-plate and screws and only 4.2g without the carbon fiber T-plate, more than 20% lighter than stock plastic motor mount. To achieve this milestone, we have to machine the motor mount from a block of billet SWISS 7075 aluminum to minimize the number of parts, resulting in the lightest weight possible.– Innovative slot design to allow easy adjusting gear meshAdjusting gear mesh is not always an easy job, however with NEXX innovative method of adjusting the gear mesh, it’s very simple, fool-proof one screw driver operation.– Solid contructure:NEXX solves the problem of motors being ejected from crashes by a new method of lockup and hold the motor in secured position so that in hardest crashs, the motor cannot be ejected from the mount.– Free carbon fiber T-plateNEXX Racing motor mount also comes with a free high quality carbon fiber T-plate #5. Free of charge– Free carbon damper plateNEXX Racing motor mount also comes with a carbon damper plate free of charge.– Tridamper system:NEXX Racing motor mount is designed to the use with Nexxracing damper disk system or Nexx racing tridamper system.The package includes:1 x Precision CNC SWISS 7075 T6 aluminum motor mount4 x eccentric bearing holders to allow height adjustment of the motor mount.1 x carbon damper plate1 x Aluminum damper post1 x carbon fiber T-plate S#5 (strongest)
NX-262-R
Nexx Racing Kyosho MR03W Mono Suspension (RED)
95,00 CHF*
Features:Nexx Racing introduces new MR03W Mono suspension system.Designs based on full scale car model for realism.Replacement of stock suspension system.Provides better control of roll center and suspension geometry while travelling.Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.Same width as stock (W).Same ride height as stock.Same steering bar as stock (toe 0 degree).Guarantees no steering pump as suspension travels.CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.Caster angle is +1° degrees.Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.Anleitung NX-274 MR03 Mono Suspension Setup
NX-274-R
Nexx Racing Dual-Spring Precision Bearing Center Shock (BLACK)
22,00 CHF*
The DSB Center Shock is designed with double spring configuration with easy “one-hand” shock length and spring tension adjustment. Super easy and fast adjustment. DSB center shock intergrates precision bearings in the system to improve smoothness of operation allowing multi-direction movements helping the miniZ more stable in any action.
NX-133
%
Nexx Racing TriDamper System For NX-262 Motor Mount, NX-247 and NX-248 Gimbal Motor Mount.
17,00 CHF*
20,00 CHF*
(15% gespart)
vorher 20,00 CHF*
Tri Damper System for NX-262 Motor Mount, NX-247 and NX-248 Gimbal Motor Mount.ONLY for NX-262 98-102mm MM Motor MountPacking :2 x Side Damper1 x Side Damper mount2 x M2x3 Button Hex Head Screw2 x M2x5 Set Screw2 x 2x4x1 Aluminum spacerRequires:NX-262 98-102mm MM Motor Mount, NX-247 PN2.5 gimbal motor mount , NX-248 MR03 gimbal motor mount.NX-130 to NX134 center shock ( depend on color).NX-151 damper springs set, NX-021 carbon damper disk.
NX-283
vorher 20,00 CHF*
Nexx Racing Extended Precision CNC Polished Stainless Steel Damper Post
7,00 CHF*
Features:– Extremely Durable as made from Stainless Steel.– Polished Surface.– 11mm in length.Package Includes:– 1 x Damper Post (11 mm)– 2 x Button Hex Screws M2x5
NX-317
Nexx Racing Mini-Z MR03 CNC Aluminum Front Suspension Spacer (BLACK)
11,00 CHF*
NEXX Racing Mini-Z MR03 Front Suspension Spacer (BLACK) is used to replace MR03 plastic spacer when installing optional double A-arm V-LINE from NEXX RACING or PN Racing Double A-Arm Front Suspension or PN Racing MR3051 tower bars. It eliminates the need of cutting off partial of the MR03 plastic spacer when using the optional front suspensions.*** Do not work with stock Kyosho Mini-Z front suspensionMaterial: Aluminum 7075Color: Black anodizing color
NX-200
Nexx Racing Mini-Z 2 WD MR015/02/03 LCG 98-102mm Alu 7075 Square Motor Mount (BLACK)
40,00 CHF*
New NEXX RACING precision CNC SWISS aluminum 7075 T6 motor mount is designed to replace stock plastic Kyosho Mini-Z motor mount. It is designed for Kyosho MR02/03 both RTR kits and EVO kits with stock square motors.Specifications:Weight: 5.8g (without T-plate)Designed for Kyosho Mini-Z 98 and 102mm MM chassisFits all stock Kyosho square brushed and square brushless motorsFits both Kyosho and PN Racing square motorsFeatures:?Lowest CG motor mount on the marketThe new motor mount is designed for the stock square motors. A lot of hours of engineering have been put into this motor to lower the C.G to lowest possible. You cannot go lower than this.? Lightest motor mount on the marketBesides being the lowest CG motor mount on the market, it is also the lightest weight motor mount on the market with less than 6g in weight. To achieve this milestone, we have to machine the motor mount from a block of billet SWISS 7075 aluminum to minimize the number of parts, resulting the lightest weight possible.? Innovative slot design to allow easy adjusting gear meshAdjusting gear mesh is not always an easy job, however with NEXX innovative method of adjusting the gear mesh, it’s very simple, fool-proof one screw driver operation.? Innovative carbon support designNEXX solves the problem of motors being ejected from crashes by a new method of lockup and hold the motor in secured position so that in hardest crashs, the motor cannot be ejected from the chassis.? Free carbon fiber T-plateNEXX Racing motor mount also comes with a free high quality carbon fiber T-plate. Free of charge? Free plastic damper postsNEXX Racing motor mount also comes with 2 plastic damper posts free of charge. This plastic damper post is compatible with stock plastic Kyosho parts only. It may need some modification job to fit third party upgrade parts.? Easy center shock height adjustmentNEXX Racing motor mount offers the ability to adjust the height of center shock.The package includes:1 x Precision CNC SWISS 7075 T6 aluminum motor mount4 x eccentric bearing holders to allow height adjustment of the motor mount.1 x Aluminum damper posts1 x carbon fiber T-plate S#5 (strongest)
NX-016
%
Tipp
Nexx Racing Gimbal Motor Mount For PN 2.5 Chassis (RED)
32,00 CHF*
40,00 CHF*
(20% gespart)
Use for PN2.5 Chassis.Wheelbase adjustable from 98mm to 102mm.This system is an improvement from the carbon T-Plate system and help to smoother your Mini-Z as it does not depend on the hardness of the carbon T-Plate.Lowest CG system on the market.Made from CNC 7075 Aluminium T6.Package includes:1x 7075 Aluminium PN2.5 Gimbal Mount.2x 7075 Aluminium Side Lower Holders.1x Brass Middle Holder.1x Brushing.1x 7075 Aluminium Motor Mount (made from a billet).1x 3x5x0.3 Washer.1x Countersunk Screw (M2 x 10).2x Countersunk Screw (M2 x 4).1x 7075 Aluminium Center Shock Post.1x Carbon Fiber Damper Plate.4x Ball Bearing Adapters.1x Button Head Screw (M2 x 5).Requires:NX-283 NexxRacing Tri-damper system.NX-130 to NX134 NexxRacing Center Shock (depend on colour).
NX-247-R
Nexx Racing V-Line Front Suspension System (RED)
109,00 CHF*
NEXX RACING V-line Front Suspension system is designed with innovative features such as quick adjustable caster, quick adjustable camber, adjustable ride height…. It makes the Mini-Z looks much like a real car, not only fast but also stable, better cornering and better suspension overall. With locknuts and kingpins, V-LINE is designed to minimize most of the play resulting very smooth performance. The V-LINE suspension systems fits only Mini-Z MR03 wide base models and also fits PN 2.5 Chassis. For easy assembly, we pre-install the V-LINE suspension system at factory so it’s very easy and fast to assembly it on the Mini-Z.COLOR: REDV-LINE SUSPENSION SYSTEM FEATURESV- line suspension is designed with 2 V-shaped suspension forks to bring you a cool suspension system·Same width as stock. (MR02/ MR03 PNR2.5W Chassis width)·Suspension movement use ball joints instead of sliding knuckle and locknut easy adjustment play between knuckle and upper arm make joints will not pop out even during hard collision.·Adjustable camber from 0-30 degrees with 4 position eccentric shaft with easy operation·Quick adjustable caster by caster bar from 0-1.90 ·Both 00 and 10 lower A arms provided to facilitate suspension setup·Ride height adjustment with turn of a screw·All 3 tie rods 00, 0.50, 10 included ·High quality Precision CNC Swiss 7075 aluminumAnleitung V-Line
NX-027
Nexx Racing Carbon Damper Disks (2pcs)
5,50 CHF*
High quality carbon fiber Damper Disks (2pcs)
NX-021
Nexx Racing Dual-Spring Precision Bearing Center Shock (RED)
22,00 CHF*
The DSB Center Shock is designed with double spring configuration with easy “one-hand” shock length and spring tension adjustment. Super easy and fast adjustment. DSB center shock intergrates precision bearings in the system to improve smoothness of operation allowing multi-direction movements helping the mini-Z more stable in any action.
NX-130
Nexx Racing Dual-Spring Precision Bearing Center Shock (BLUE)
22,00 CHF*
The DSB Center Shock is designed with double spring configuration with easy “one-hand” shock length and spring tension adjustment. Super easy and fast adjustment. DSB center shock intergrates precision bearings in the system to improve smoothness of operation allowing multi-direction movements helping the miniZ more stable in any action.
NX-132
%
Nexx Racing Aluminum Knuckle Set For V-LINE with 3mm Shaft (RED)
12,00 CHF*
17,50 CHF*
(31.43% gespart)
NX-271-R
Nexx Racing V-Line Front Suspension Spring Set (4 pairs)
5,00 CHF*
Include four sets (8pcs) of different hardness Springs for V-Line Suspension System, each hardness comes with different colors.
NX-113
Nexx Racing Mini-Z MR03 Carbon T-Plate S#2
4,00 CHF*
High quality carbon fiber T-plate for Kyosho Mini-Z MM chassisStrength #2We provide 4 levels of strength starting lowest strength #2 to highest strength #5.
NX-023
%
Nexx Racing Kyosho MR03W Mono Suspension (BLACK)
65,00 CHF*
95,00 CHF*
(31.58% gespart)
vorher 95,00 CHF*
Features:Nexx Racing introduces new MR03W Mono suspension system.Designs based on full scale car model for realism.Replacement of stock suspension system.Provides better control of roll center and suspension geometry while travelling.Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.Same width as stock (W).Same ride height as stock.Same steering bar as stock (toe 0 degree).Guarantees no steering pump as suspension travels.CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.Caster angle is +1° degrees.Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.Anleitung NX-274 MR03 Mono Suspension Setup
NX-274-BL
vorher 95,00 CHF*
%
Tipp
Nexx Racing Gimbal Motor Mount For PN 2.5 Chassis (Black)
32,00 CHF*
40,00 CHF*
(20% gespart)
Use for PN2.5 Chassis.Wheelbase adjustable from 98mm to 102mm.This system is an improvement from the carbon T-Plate system and help to smoother your Mini-Z as it does not depend on the hardness of the carbon T-Plate.Lowest CG system on the market.Made from CNC 7075 Aluminium T6.Package includes:1x 7075 Aluminium PN2.5 Gimbal Mount.2x 7075 Aluminium Side Lower Holders.1x Brass Middle Holder.1x Brushing.1x 7075 Aluminium Motor Mount (made from a billet).1x 3x5x0.3 Washer.1x Countersunk Screw (M2 x 10).2x Countersunk Screw (M2 x 4).1x 7075 Aluminium Center Shock Post.1x Carbon Fiber Damper Plate.4x Ball Bearing Adapters.1x Button Head Screw (M2 x 5).Requires:NX-283 NexxRacing Tri-damper system.NX-130 to NX134 NexxRacing Center Shock (depend on colour).
NX-247-BL
