GL rear mount used for mounting lexan bodies works with the GL Racing GT and GLR
GLA-THRUST-61223MWX ceramic thrust bearings. A great addition to our 2.0 mm ceramic and carbide dif balls.
Carbon fiber and Aulunimum Bumper/Mount für den Jomurema GT01 Body.Passend für den MWX R.1, GL GLR / GLR-GT / GTR, PN 2.0/3.0, MR03,...
Dry carbon and CNC machined weighted bumper system for lexan bodied 1/28 scale cars This is one of the quickest and easiest way to tame down the steering of your Double A arm cars like the GL GT and the Reflex R28 but also work great for quick changes to even the MWX GLR. Passend für den MWX R.1, GL GLR / GLR-GT / GTR, PN 2.0/3.0, MR03,...
Dry carbon and CNC machined weighted bumper system for lexan bodied 1/28 scale cars This is one of the quickest and easiest way to tame down the steering of your Double A arm cars like the GL GT and the Reflex R28 but also work great for quick changes to even the MWX GLR. Passend für den MWX R.1, GL GLR / GLR-GT / GTR, PN 2.0/3.0, MR03,...
Instead of being forced to purchase a 50 dollar servo saver by using a sub par rack in the GTR MWX has once again re engineered another GL part to make better for the end user. With this unit you dont have to use the servo saver.
universal brass bumper weights
Center Spring Set: BLACK = SUPER SOFT SILVER = SOFT
red anodized shims used for suspension adjustments and many other adjustments 2 x 1mm2 x 1.5mm
Universal Zero Slop axles. Get rid of the gap between the inner bearing ID and the OD of the axle. On some cars this clearance can alter your camber by 1-2 degrees!Will fit MWX, GL, RTA, Atomic, Reflex RX28 and many others Comes with extra o rings MAKE SURE AND USE A DROP OF OIL OR GREASE ON THE O RINGS SO THEY SLIDE ON
These eccentrics are precision machined and only fit the GLR-GT pod. (not for GLR or the GTR)allow for .5mm lower ride height and .5 higher than kit eccentrics the other 2 eccentrics are .5mm towards the center. comes with 4 pcs Please watch the video!
Install Kit includes: front bumper R1 specific side clips wing mount Carbon wing
Neu mit Alu Frontplättchen und nur 0.3g schwererCarbon fiber and Alunimum Bumper/Mount für den Jomurema GT01 Body.Passend für den MWX R.1, GL GLR / GLR-GT / GTR, PN 2.0/3.0, MR03,...
Single Shield dry ceramic motor bearings for 1/28 scale brushless motors (PN/GL) We suggest picking up a bottle of ProLube, you should not run them dry.
Finally a better choice of bearings for the GL line of cars. These bearings are ceramic and only have a shield on one side which gives you the least amount of friction.These bearings can be run dry or you can lubricate them.This is the 8 bearing kit which is for the dif, rear axle and front wheels
Finally a better choice of bearings for the GL line of cars. NEW 2024 edition with double shield and even better performance! These bearings can be run dry or you can lubricate them. This is the 8 bearing kit which is for the dif, rear axle and front wheels Bearing Size: 3x6x2.5
16pc Ceramic bearing for the Giulia all bearings except steering post longer run time cooler motor