New v1.5 aero dynamic F1 bodyLexan BodyBody comes unpainted

COMPLETE CONVERSION KIT TO GET YOUR R1F1 UP TO THE LATEST NATIONAL TITLE WINNING MACHINE1Kit includes:LATEST 114MM ALUMINUM CHASSIS KIT V1.5 WINGSET V1.5 WING MOUNT V1.5 BODY

black laser sintered SLS front and rear wings only soft nylon V1.5 Wing Mount must be used (RF-RWM-828)

2 PCSACETONE SAFE DELRINMED/THICK GLUE11X19 ZERO OFFSETFULLY MACHINED 

OPTION front spring set Comes with 2 Pairs1 pair of BLACKS 1 parir of GOLDS BLACK=SUPER SOFT RED=SOFT GOLD=MED BLUE=HARD SILVER=FIRM

Spacer to allow fitment of the MWX high capicity 550 mah batteries on your F1. This mod adds weight in the center of the car making it more stable. Put a drop of CA or shoe goo between the spacer and the deck so that when you remove the shock mount it stays put. Color: black (red shown is only for contrast) Contains: Spacer only

NEW ALUMINUM CHASSIS UPGRADE! MORE CLEARANCE FOR THE BIG BLOCK BATTERY EXTENDED WHEELBASE TO 114MM MWX SERVO DROPS IN NEW UNDER AERO TO MATCH UPCOMING NEW BODY/WINGSET ACKERMAN NOW SLIDES AND HAS MORE ADJUSTMENT COMES WITH PRINTED 00 CAMBER PLATE (LIMITED TO 20) COMES WITH 1MM SPACERS(5) COMES WITH M2/3.0 SERVO BALL STUD comes with extended ball cup for the linkage PLEASE WATCH INSTALL VIDEO, ITS IS NOT "DROP IN" AND REQUIRES SOME MODIFICATIONS TO THE BULKHEADBitte unbedingt das Installationsvideo beachten. Es ist nicht ein 1:1 Austausch und benötigt einige Anpassungen an der Front.

These are tuned 1/28 scale servos. After months of testing we were able to come up with an excellent tune. Another feature that we had concern with was the "wandering" and constantly having to adjust left and right endpoints. This is no longer an issue with the MWX servos AT THIS TIME THESE DO NOT FIT THE FORMULA R1.THIS IS BEING WORKED ON AND RELEASED SOON

NEW VERSION 2!! THESE ARE A RUNNING CHANGE, THE RED ALUMINUM V1 IS NO LONGER AVAILABLE WHITE BILLET DELRIN GEOMETRY CHANGE, RECHECK YOUR RIDE HEIGHT SINGLE O RING PER SIDE USE NON FRICTION GREASE (BLACK IS THE BEST) ON BOTH ORINGS Because of the slop being removed it is recommended to purchase the "ZS" camber plates(BLACK) which have been designed for the axle and knuckle slop being removed.

Ride height shims for adjusting rear axle

Body Clips - Gold farbig- 10 Stück Gold

Einfaches Tool um die Spurstangen und somit die Spur zu verstellen.

Red anodized aluminum knuckles for your R.1. Not only are these more durable but they are also part of the ZS series. The O-Rings seat inside the knuckles. This cuts down on slop and it also seals the damping grease inside.Because of the slop being removed it is recommended to purchase the "ZS" camber plates which have been designed for the axle and knuckle slop being removed.

Universal Zero Slop axles. Get rid of the gap between the inner bearing ID and the OD of the axle. On some cars this clearance can alter your camber by 1-2 degrees!Will fit MWX, GL, RTA, Atomic, Reflex RX28 and many others Comes with extra o rings MAKE SURE AND USE A DROP OF OIL OR GREASE ON THE O RINGS SO THEY SLIDE ON

Aluminium Motor Mount Plate for MWX Formula R.1Aluminium Motor Grundplatte für MWX Formula R.1Carbon Pod Plate 2.1 GrammComposite Pod Plate 2.7 GrammAluminium Pod Plate 3.75 Gramm

Carbon Wing Mount for MWX Formula R.1Carbon Front Spoiler Halter für MWX Formula R.1Carbon Wing Mount 2.1 GrammComposite Wing Mount 2.9 GrammAluminium Wing Mount 3.9 Gramm

Carbon Motor Mount Plate for MWX Formula R.1Carbon Motor Grundplatte für MWX Formula R.1Carbon Pod Plate 2.1 GrammComposite Pod Plate 2.7 GrammAluminium Pod Plate 3.75 Gramm

Aluminium Wing Mount for MWX Formula R.1 Aluminium  Front Spoiler Halter für MWX Formula R.1Carbon Wing Mount 2.1 GrammComposite Wing Mount 2.9 GrammAluminium Wing Mount 3.9 Gramm

Body Clips - farbig10 Stück Gold10 Stück Schwarz10 Stück SilberThe most frequently lost item in mini RC has been addressed with our redesigned body clip. It now features an enhanced hook, making it simpler to attach to the body post.

12 Black hard anodized 3.5mm Aluminum ballstuds for your MWX R1 and Formula R1 kits. DO NOT OVER TIGHTEN DO NOT USE LOCTITE USE A GOOD 1.5 TOOL TWO EXTRAS ARE INCLUDED,THIS IS AN ADVANCED USER OPTION THEY ARE DELICATE TO INSTALL.BENEFIT IS A SMOOTHER OPERATING SUSPENSION. 1 GRAM WEIGHT SAVINGS

Upper deck for the MWX F1 contains 3pcs

2 PCSACETONE SAFE DELRINMED/THICK GLUE11X19 ZERO OFFSETFULLY MACHINED 

2 PCSACETONE SAFE DELRINMED/THICK GLUE11X19 ZERO OFFSETFULLY MACHINED 

2 PCSACETONE SAFE DELRINMED/THICK GLUE14x20 ZERO OFFSETFULLY MACHINED 

2 PCSACETONE SAFE DELRINMED/THICK GLUE14x20 ZERO OFFSETFULLY MACHINED 

2 PCSACETONE SAFE DELRINMED/THICK GLUE14x20 ZERO OFFSETFULLY MACHINED 

Rear wing mount for the MWX Formula v1.5Color: RedMaterial: AluminiumAttention: the picture shows spoiler and front wing which are not part of this article.

V2 F1 SERVO SAVER NEW DESIGN BETTER SPRING CARBON RETAINER  PLEASE FOLLOW THE SPECIFIC INSTRUCTIONS AND FOLLOW THE VIDEO DO NOT USE WITHOUT THE CARBON RETAINER NOT EVEN ONCE DISASSEMBLE THE SAVER BY REMOVING THE TOP SCREW INSTALL TWO .1MM SHIMS ON TOP OF THE LOWER BEARING (SEE PIC) REASSEMBLE LOCTITE THE SCREW SCREW ALL THE WAY DOWN, IT WILL SEEM TIGHT BUT THERE IS AN ORING AT THE BOTTOM AND IT WILL FREE UP INSTALL THE CARBON RETAINER USING PROVIDED HARDWARE