A simple piece for the GLF.GLR ,GT that eliminates the pod ball shims giving you the absolute perfect alignment and that translates to increase grip in the case that your shims were not perfect. the part is machined from solid Delrin (not 3d printed) and designed to have "squeeze" so if any slop develops you can tighten it up. i will make an install video before the release.
A heavy (4.85g) brass weight that is used under the rear pod on GL Racing GLR and GLR GT. This weight keeps the car flat and really stable in quick chicanes, increase rear grip.
These eccentrics are precision machined and only fit the GLR pod. allow for .5mm lower ride height and .5 higher than kit eccentrics the other 2 eccentrics are .5mm towards the center. comes with 4 pcs Please watch the video!
Fresh off our PNNAC national championship win this is the chassis that allowed team driver Marcus Williams to secure the top finish! This chassis will convert your GLR into a fierce machine:higher corner speedsextra stability less traction rolling on high gripIt completely changes the car so much that it requires different springs and softer front tires. We recommend GLF green sides springs for the front ( don't forget to re shim the knuckles) and we have found the KS soft and KSM softs have been the best front tire choices.
FPM is not included, the chassis will no longer accept the GL captured pivot
Features:
Weight , the MWX chassis is lighter than the GL brass chassis and since most with this car run stock and super stock the heavy weight of the car naturally makes a difference. I basically shifted the weight into better positions to stabilize the handling while calming down the steering making the chassis wide everywhere is not optimal. High level competition has taught me this.
Due to the slightly heavier servo the car requires, I offset some of that Weight with a cutout under the servo.
Each chassis also comes with the infamous FPM (floating pod mount). to further enhance handling.
Dry carbon and CNC machined weighted bumper system for lexan bodied 1/28 scale cars
This is one of the quickest and easiest way to tame down the steering of your Double A arm cars like the GL GT and the Reflex R28 but also work great for quick changes to even the MWX GLR.
Passend für den MWX R.1, GL GLR / GLR-GT / GTR, PN 2.0/3.0, MR03,...
Dry carbon and CNC machined weighted bumper system for lexan bodied 1/28 scale cars
This is one of the quickest and easiest way to tame down the steering of your Double A arm cars like the GL GT and the Reflex R28 but also work great for quick changes to even the MWX GLR.
Passend für den MWX R.1, GL GLR / GLR-GT / GTR, PN 2.0/3.0, MR03,...
This brace keeps the upper arms from wiggling around from the slop. the car will track straight and have more precise steering. It's a must have for the GLF
This kit puts the center shock in the proper location. Makes the car sharp and predictable and handles the bumps much better.This kits was used to get the quickest lap in pan car as well as P2 early 2021 at the PN nats, also the the fastest lap of the weekend at the 2021 Texas vs Cali challenge at RCHQ. And used on the Top Qualifier and fastest lap at the 2021 GL US nationals. So its pedigree is strong!PLEASE WATCH THE INSTALL BEFORE ATTEMPTING THE INSTALLATIONWatch Video
New geometry for 2023!
the shock is now located more forward for a more linear feel and increased grip.also battery compartment is wider to accommodate some of the new larger batteries.you can remove the battery without removing the shock now
PLEASE WATCH THE INSTALL BEFORE ATTEMPTING THE INSTALLATIONWatch Video
Instead of being forced to purchase a 50 dollar servo saver by using a sub par rack in the GTR MWX has once again re engineered another GL part to make better for the end user. With this unit you dont have to use the servo saver.
MWX-PRCV1-023Another Great chassis design, this time for the GL Guilia awd format. This design achieves 51/49 balance which is perfect for AWD on RCP since the grip levels are so high. The car rotates on entry and allows you to power out of the corners like a legit AWD Carbon Upper Deck INCLUDED!Watch Video
In the GLF world we all have figured out that the brass chassis is just too heavy. Yes it drives better and is stable but due to the weight it accelerates slow and lap time's are slower. On the flipside the stock carbon chassis is great but it has a tendency to traction roll when pushed especially on high grip. So using the same theory as our national championship winning GLR chassis we have come up with a new design that is heavier than the carbon but also wider which promotes stability without hindering acceleration! With this chassis you can push the car hard and run the stickier 21 fronts and not have to cut them down as much.
Farbe: Schwarz
Universal Zero Slop axles. Get rid of the gap between the inner bearing ID and the OD of the axle. On some cars this clearance can alter your camber by 1-2 degrees!Will fit MWX, GL, RTA, Atomic, Reflex RX28 and many others Comes with extra o rings MAKE SURE AND USE A DROP OF OIL OR GREASE ON THE O RINGS SO THEY SLIDE ON
These eccentrics are precision machined and only fit the GLR-GT pod. (not for GLR or the GTR)allow for .5mm lower ride height and .5 higher than kit eccentrics the other 2 eccentrics are .5mm towards the center. comes with 4 pcs Please watch the video!
Finally here ProBuild brass chassis for the GLR-GT (not GTR or GLR).Comes with Floating Pod Mount (FPM)This chassis will convert your GLR-GT into a fierce machine:higher corner speedsextra stability less traction rolling on high gripAttention:Will not work with the Reflex Battery Hold Down!!Includes:brass chassis plateFloating Pod Mount (FPM) !!
Neu mit Alu Frontplättchen und nur 0.3g schwererCarbon fiber and Alunimum Bumper/Mount für den Jomurema GT01 Body.Passend für den MWX R.1, GL GLR / GLR-GT / GTR, PN 2.0/3.0, MR03,...
MMK’s (Motor Maintenance Kit)
Kit comes with:
2 dry ceramic single shield motor bearings1 bottle of ProLubeJIG for pressing bearing out of the sensor board side(PN and rocket style motors)Tool for tapping the bearing out
Stock motor bearings are low quality bearings, expect .1-.3 lower amp draw, longer runtime, quicker acceleration.
Farbe: Flourescent yellowWatch Youtube Video
Single Shield dry ceramic motor bearings for 1/28 scale brushless motors (PN/GL) We suggest picking up a bottle of ProLube, you should not run them dry.
Finally a better choice of bearings for the GL line of cars. These bearings are ceramic and only have a shield on one side which gives you the least amount of friction.These bearings can be run dry or you can lubricate them.This is the 8 bearing kit which is for the dif, rear axle and front wheels
A must have for the GT, this piece is a game changer for the car allows for castor adjustment from 1-4* making the car much easier to drive and less twitchy on the straights.These are Laser 3D Printed Parts: very durable but still printed.
Complete kit to update your GLF to world class performance! Kit includes:Side SpringsCenter SpringsBody PostUpper DeckCantilevers ZS O-Ring AxlesFPM (Free Pod Mount)Pivot Ball SpacerFPM Roll Center ShimRed Center Shock CollarRed Center Shock Droop Stop
Finally a better choice of bearings for the GL line of cars.
NEW 2024 edition with double shield and even better performance!
These bearings can be run dry or you can lubricate them.
This is the 8 bearing kit which is for the dif, rear axle and front wheels
Bearing Size: 3x6x2.5