GL is going to release our Hard Case LiHV Battery for mini scale chassis. It is compatible to our GL own designed battery connector which can be plugged into the battery “directly” as if you are using the pin plugs. At the same time it can support pin plugs if you prefer to use pin plugs. No matter which of the above mentioned plugs you are using, you are able to enjoy the benefits of this Hard Case Battery:
Battery producers usually making “extra” length of wire in order to suit all chassis but this makes wires are jumping up in the chassis due to they are too long. Now you can tailor made the length of wires coming out from your car’s ESC to perfectly match each of your car setting & chassis. Side benefit is reduced weight as less redundant wires.
The battery is able to sit into the car chassis properly without intervention by wires coming out from the battery.
With the above mentioned 2 benefits, you will find your wires are more tidily placed inside the chassis which have added advantage to the car stability.
It is a high voltage battery that supports charging up to 8.6 voltage and gives you more power.
More durable indeed as the battery is protected by the hard case.
Battery size:43x20x13mm
1 Stecker-Set,Passend um die Standard Stecker von Lipos, Ladekabel und ESC zu ersetzen.
Extrem tiefer Übergangswiderstand für möglichst geringen Verlust. Extra satter Sitz, damit die Steckverbindung sich beim Fahren oder bei einem Crash nicht löst.
Inhalt:
1 x Stecker, 1 x Buchse aus CNC gefrästem Kunststoff
Kupfer pins und stainless steel Schrauben
6 Silikon Kabel (22awg)
Features:
Der Stecker ist bis 30A geeignet
Extra satter Sitz der Steckverbinder
Sehr einfach zu löten dank grosser Lötlaschen
High Voltage 2S battery for R/C Competition usage. Size fit for GL-RIDER, GLA ,GLR, GLF-1, GLR-GT, GTR, RX28, RTA, MWX R.1, Nexx SpecterWird direkt mit dem GL Anschluss-Stecker geliefert!
GL is going to release our Hard Case LiHV Battery for mini scale chassis. It is compatible to our GL own designed battery connector which can be plugged into the battery “directly” as if you are using the pin plugs. At the same time it can support pin plugs if you prefer to use pin plugs. No matter which of the above mentioned plugs you are using, you are able to enjoy the benefits of this Hard Case Battery:
Battery producers usually making “extra” length of wire in order to suit all chassis but this makes wires are jumping up in the chassis due to they are too long. Now you can tailor made the length of wires coming out from your car’s ESC to perfectly match each of your car setting & chassis. Side benefit is reduced weight as less redundant wires.
The battery is able to sit into the car chassis properly without intervention by wires coming out from the battery.
With the above mentioned 2 benefits, you will find your wires are more tidily placed inside the chassis which have added advantage to the car stability.
It is a high voltage battery that supports charging up to 8.6 voltage and gives you more power.
More durable indeed as the battery is protected by the hard case.
Battery size:
3x JST-PH Parallel charging cable
For GLA and Atomic AMZ/BZ Lipo batteries or any other 2S Lipo with a JST-PH connector.
This handy charge cable allows you to connect 4mm banana plugs to chargers, and the charger's balance board.
On the battery side, we have provided 3x JST-PH connectors so that you can charge/discharge up to 3 packs at a time.
You do not have to use all 3 of course, using it to charge 1 pack is perfectly fine, but if you would like charge/discharge up to 3 packs together, this cable can do it.
For those new to parallel charging, you can google/you tube information on it, but in summary:
You can only connect 2S Lipo to this cable
Mixing 300mAh, 330mAh, 360mAh together is ok
The packs should be reasonably similar in voltage, for example, 2 packs 90% full, 1 pack empty, is NOT such a good idea, as it will cause a lot of current(Amps) going from the full packs to the empty pack, charging the empty pack at very high current(AMps), this might even melt the cable if the Packs are large/high C enough.
All empty is fine, ~30%, ~40%, ~50% mix together is fine.
Ideally charger capacity set to total mAh of the packs
Charger current can scale up according to total capacity of the packs
Below is a good video guide:
https://www.youtube.com/watch?v=WY194Md6KNg
Produktinformationen "3x GL connector Parallel Charging Cable"
[PT0006] 3x GL connector Parallel Charging Cable
Details:
3x JST-PH Parallel charging cable
For GLA and Atomic AMZ/BZ Lipo batteries or any other 2S Lipo with a JST-PH connector.
This handy charge cable allows you to connect 4mm banana plugs to chargers, and the charger's balance board.
On the battery side, we have provided 3x JST-PH connectors so that you can charge/discharge up to 3 packs at a time.
You do not have to use all 3 of course, using it to charge 1 pack is perfectly fine, but if you would like charge/discharge up to 3 packs together, this cable can do it.
For those new to parallel charging, you can google/you tube information on it, but in summary:
You can only connect 2S Lipo to this cable
Mixing 300mAh, 330mAh, 360mAh together is ok
The packs should be reasonably similar in voltage, for example, 2 packs 90% full, 1 pack empty, is NOT such a good idea, as it will cause a lot of current(Amps) going from the full packs to the empty pack, charging the empty pack at very high current(AMps), this might even melt the cable if the Packs are large/high C enough.
All empty is fine, ~30%, ~40%, ~50% mix together is fine.
Ideally charger capacity set to total mAh of the packs
Charger current can scale up according to total capacity of the packs
For GLA, Atomic AMZ/BZ and Jomurema Lipo batteries or any other 2S Lipo with a JST-PH connector.This handy charge cable allows you to connect XT60 plug to chargers, and the charger's balance board.On the battery side, we have provided 3 x JST-PH connectors so that you can charge/discharge up to 3 packs at the same time.Charge one battery is fine, if you charge 3 batteries together, make sure all batteries is same type and capacity.Total length 18cm, protected by PE wrapHigh quality Silicon wire 14AWG for power, 22AWG for Balance Plug
